PLX2000 - Receiver Citronic - Free user manual and instructions
Find the device manual for free PLX2000 Citronic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stereo Receiver |
| Brand | Citronic |
| Model | PLX2000 |
| Power Output | 2 x 200W RMS (4 ohms) |
| Peak Power | 2 x 400W |
| Frequency Response | 20Hz - 20kHz ±1dB |
| Total Harmonic Distortion | < 0.1% |
| Input Impedance | 47k ohms (RCA) |
| Inputs | 2x RCA stereo, 1x 3.5mm aux, 1x Optical |
| Outputs | 2x Speaker terminals, 1x Subwoofer pre-out, Headphone jack |
| Tuner | FM/AM digital tuner with 30 presets |
| Bluetooth | Yes, version 4.2 |
| Remote Control | Included (IR) |
| Dimensions (W x H x D) | 430 x 80 x 310 mm |
| Weight | 7.5 kg |
| Power Supply | 230V AC, 50Hz |
| Power Consumption | 500W max |
| Protection | Short circuit, overheat, overcurrent |
| Cooling | Convection with heat sinks |
| Material | Aluminum front panel, steel chassis |
| Color | Black |
| Warranty | 2 years |
Frequently Asked Questions - PLX2000 Citronic
How do I connect speakers to the PLX2000?
Connect your speakers to the speaker terminals on the rear panel. Ensure proper polarity: red to positive, black to negative. Use banana plugs or bare wire (max 10 AWG). Avoid short circuits.
What is the maximum power output of the PLX2000?
The PLX2000 delivers 2 x 200W RMS at 4 ohms, with a peak power of 2 x 400W. Actual output depends on impedance and signal level.
Does the PLX2000 have Bluetooth connectivity?
Yes, it features Bluetooth 4.2 for wireless streaming from your smartphone, tablet, or computer. Pair by selecting 'PLX2000' from your device's Bluetooth menu.
How to perform a factory reset on the PLX2000?
To reset to factory defaults, press and hold the 'Menu' button for 5 seconds until 'Reset' appears on the display. Confirm with the 'Enter' button. All settings will be cleared.
Can I use the PLX2000 with a turntable?
Yes, but your turntable must have a built-in phono preamp or you can connect an external phono stage. The PLX2000 does not have a dedicated phono input. Use the RCA aux input.
What are the dimensions and weight of the PLX2000?
The receiver measures 430 x 80 x 310 mm (W x H x D) and weighs approximately 7.5 kg. Allow adequate ventilation around the unit.
How to clean the PLX2000?
Unplug the unit and use a soft, dry cloth to wipe the exterior. Avoid harsh chemicals or abrasive cleaners. Clean ventilation grilles with a vacuum or compressed air.
Is there a remote control included?
Yes, the PLX2000 comes with an IR remote control for basic functions like volume, input selection, and tuner control. Use two AAA batteries (not included).
What protection features does the PLX2000 have?
The receiver includes short circuit protection, thermal overload protection, and overcurrent protection. If activated, the unit will shut down and the LED will blink red.
How to update the firmware on the PLX2000?
Firmware updates are not available for this model. The PLX2000 is designed with fixed firmware for stability. No user-updatable firmware is provided.
User questions about PLX2000 Citronic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual PLX2000 - Citronic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLX2000 by Citronic.