CB-MCC1 - Musical instrument accessory ROLAND - Free user manual and instructions

Product Type	Cable / Accessory
Brand	Roland
Model	CB-MCC1
Length	3 m (9.8 ft)
Weight	0.2 kg (0.44 lbs)
Connector Type	1/4" TS (unbalanced)
Shielding	Braided copper shield
Conductor Material	Oxygen-free copper
Jacket Material	PVC
Color	Black
Power Source	Passive (no power required)
Primary Function	Transmit audio signals from instrument to amplifier or mixer
Compatible Devices	Electric guitars, basses, keyboards, and other line-level equipment
Care Instructions	Wipe with a dry cloth; avoid exposure to extreme temperatures and moisture
Safety Precautions	Do not bend sharply; avoid pulling on the cable; disconnect by gripping the plug
Spare Parts Availability	Non-repairable; replace entire cable if damaged
Warranty	1 year (limited)
Manufacturer	Roland Corporation

Frequently Asked Questions - CB-MCC1 ROLAND

What is the Roland CB-MCC1?

The Roland CB-MCC1 is a coiled instrument cable designed for connecting musical instruments like electric guitars and keyboards to amplifiers or mixers.

What is the length of the CB-MCC1 cable?

The cable is approximately 3 meters (9.8 feet) long when fully extended.

What type of connectors does it use?

It features 1/4-inch TS (tip-sleeve) connectors on both ends, which are standard for unbalanced mono audio signals.

Is the CB-MCC1 shielded?

Yes, the cable includes a braided copper shield to reduce electromagnetic interference and noise.

Can I use this cable for stereo applications?

No, this is a mono (unbalanced) cable with a single signal conductor. For stereo, you would need a TRS or dual-cable setup.

Is the CB-MCC1 compatible with bass guitars?

Yes, it works well with bass guitars and other instruments with a 1/4-inch output.

How should I care for the cable?

Store it coiled loosely, avoid sharp bends, and wipe with a dry cloth to remove dust. Do not expose to moisture.

Can I repair the cable if it breaks?

The cable is not designed to be user-repairable. If damaged, it should be replaced with a new one.

Does the CB-MCC1 come with a warranty?

Yes, Roland provides a limited 1-year warranty against manufacturing defects.

Where can I find the user manual?

The manual is available for free download in PDF format from notice-facile.com or the Roland website.

USER MANUAL CB-MCC1 ROLAND

Close-up of a black audio amplifier with a magnified inset showing a close-up of the speaker grille (no text or symbols visible)

Black plastic bag with black handle and side panel, no visible text or symbols

Protective Cover for MICRO CUBE

CB-MCC1 Owner's Manual

Thank you, and congratulations on your choice of the CB-MCC1 protective cover for MICRO CUBE.

Before using this product, carefully read the section entitled: "Important Notes." This section provides important information concerning the proper operation of the product.

Important Notes

• This product is a protective cover for the MICRO CUBE.
- Protect the product from strong impact (Do not drop it!).
- Please note that the power switch of the MICRO CUBE doesn't turn on when you store and/or transport it.
- Do not expose the product to direct sunlight, place it near devices that radiate heat, leave it inside an enclosed vehicle, or otherwise subject it to temperature extremes. Excessive heat can deform or discolor the product.
- Never use benzine, thinners, alcohol or solvents of any kind, to avoid the possibility of discoloration and/or deformation.
- Do not launder or wash the entire cover.
- For everyday cleaning wipe the product with a soft, dry cloth or one that has been slightly dampened with water. To remove stubborn dirt, use a cloth impregnated with a mild, non-abrasive detergent. Afterwards, be sure to wipe the product thoroughly with a soft, dry cloth.

Specifications

• Weight: 230 g
  • Material : PVC (non-phthalate plasticizer used)
  * In the interest of product improvement, the specifications and/or appearance of this product are subject to change without prior notice.

Copyright © 2009 ROLAND CORPORATION

All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.

Attaching the CB-MCC1

1. Detach the strap from the MICRO CUBE.

1. Place the cover onto the MICRO CUBE from above.

1. Place the cover so that the MICRO CUBE's strap pins extend through the holes in the sides of the cover.

Close-up of a black audio amplifier with a close-up inset showing a small dark object (no text or symbols visible)

1. Attach the strap.

In this condition, you can perform while leaving the cover in place. To operate the power switch or connect the AC adaptor, spread the opening located on the rear of the cover.

Belt of the cover

NOTE

When transporting the MICRO CUBE, do not grasp the belt of the cover.

1. Close the fastener.

Transport or store the MICRO CUBE in this state.

Black and white photo of a branded cargo bag with handle and side panel (no visible text or symbols)

For C.A. US (Proposition 65)

WARNING

This product contains chemicals known to cause cancer, birth defects and other reproductive harm, including lead.