BNC-05BW - Musical instrument ROLAND - Free user manual and instructions
Find the device manual for free BNC-05BW ROLAND in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Metronome / Tuner |
| Brand | Roland |
| Model | BNC-05BW |
| Display | Large LCD with backlight |
| Tuning Range | A0 to C8 |
| Accuracy | ±1 cent |
| Metronome Tempo | 30–250 BPM |
| Rhythm Patterns | 9 built-in patterns |
| Sound Output | Built-in speaker and headphone jack |
| Power Source | 2 × AAA batteries |
| Battery Life | Approximately 100 hours |
| Dimensions | 100 × 60 × 20 mm |
| Weight | 90 g (without batteries) |
| Connectivity | Input and output jacks for connection to instruments |
| Accessories | Owner's manual and batteries included |
| Safety | Auto shut-off and low battery indicator |
| Maintenance | Clean with a soft, dry cloth |
| Repairability | Spare parts available through Roland service centers |
| Warranty | Standard Roland warranty |
Frequently Asked Questions - BNC-05BW ROLAND
How do I turn on the Roland BNC-05BW?
To turn on the device, press and hold the power button for 2 seconds. The LCD will light up. Press and hold again to turn off.
How do I set the tempo on the metronome?
Use the tempo buttons to adjust the BPM value. The tempo is displayed on the LCD and can be set from 30 to 250 BPM.
How do I tune my instrument?
Connect your instrument to the input jack, then select the tuner mode. Play a single note; the display shows the pitch and indicates whether it is sharp or flat.
What type of batteries does it use?
It uses 2 × AAA batteries. Insert them in the battery compartment on the back, matching the polarities.
Can I connect headphones?
Yes, connect standard headphones to the headphone jack. The built-in speaker will be muted automatically.
How do I clean and maintain the device?
Wipe the exterior with a soft, dry cloth. Do not use solvents. Remove batteries if not used for a long time.
Does it have an auto-off feature?
Yes, it has an auto shut-off function after 15 minutes of inactivity.
Can I use it with a guitar?
Yes, the input jack accepts a standard 1/4" instrument cable, making it compatible with guitars, basses, and other instruments.
How do I reset the device?
To reset, hold down the TEMPO and TUNER buttons simultaneously for 3 seconds until the display blinks.
Where can I find replacement parts?
Contact Roland's official service center or visit their website to order genuine spare parts.
User questions about BNC-05BW ROLAND
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Musical instrument in PDF format for free! Find your manual BNC-05BW - ROLAND and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BNC-05BW by ROLAND.