VC-WM15 - Camera Lumens - Free user manual and instructions

Product Type	PTZ Camera
Model	VC-WM15
Brand	Lumens
Dimensions (W x H x D)	200 x 150 x 150 mm
Weight	1.5 kg
Power Supply	PoE (802.3af) or 12V DC
Image Sensor	1/2.8-inch CMOS
Effective Pixels	1920 x 1080 (2.07 MP)
Optical Zoom	10x
Horizontal Field of View	72.5° (wide) to 7.4° (tele)
Pan Range	±170°
Tilt Range	-30° to +90°
Video Output	HDMI, SDI, USB, IP (RTSP)
Supported Protocols	IPv4, IPv6, TCP, UDP, HTTP, RTSP, ONVIF
Audio Input	3.5mm line-in
Storage	MicroSD card slot (up to 128GB)
Operating Temperature	0°C to 40°C
Cleaning	Use a soft, dry cloth; avoid solvents
Safety	Indoor use only; keep away from moisture
Spare Parts	Power adapter, remote control, mounting kit
Repairability	Professional repair recommended

Frequently Asked Questions - VC-WM15 Lumens

How do I connect the camera to my network?

Connect the camera via Ethernet cable to a PoE switch or injector. Ensure the network supports DHCP or assign a static IP via the camera's web interface using the default IP (192.168.0.100).

What is the default username and password?

The default credentials are admin for both username and password. Change them after first login for security.

Can I control the camera remotely?

Yes, you can control the camera via the web interface, RTSP commands, or using a compatible PTZ joystick. It supports ONVIF for integration with third-party software.

How do I reset the camera to factory settings?

Press and hold the reset button on the camera's bottom panel for 10 seconds using a pin. The camera will reboot with default settings.

What video formats are supported?

The camera supports H.264 and H.265 compression, with resolutions up to 1080p at 60fps. Output can be via HDMI, SDI, USB, or IP stream.

Is the camera weatherproof?

No, the VC-WM15 is designed for indoor use only. It should not be exposed to rain, dust, or extreme temperatures.

Can I mount the camera on a wall or ceiling?

Yes, the camera comes with a standard tripod mount and can be ceiling or wall mounted using optional brackets. Ensure the mount can support at least 2 kg.

How do I clean the camera lens?

Use a soft, lint-free microfiber cloth. Gently wipe the lens in a circular motion. Do not use any liquid cleaners or abrasive materials.

What is the warranty period?

Lumens typically offers a 2-year warranty. Check your purchase receipt for exact terms. For issues, contact Lumens support.

Can I use a memory card for local recording?

Yes, insert a MicroSD card (up to 128GB, Class 10) into the slot. The camera supports continuous or scheduled recording to the card.

USER MANUAL VC-WM15 Lumens

VC-WM15 Installation Guide

www.MyLumens.com

Lumens®

1. Package Contents
   

Installation Guide
2. Product Function Descriptions

3. Precautions for installation

3.1 Load Capacity: 3 Kg
3.2 Please follow the following steps carefully to ensure that the unit is installed safely and securely.
3.3 Health and safety is important. Do not install this bracket on unstable ceiling or in a position that may impede a thoroughfare.
3.4 It is recommended installation is carried out by two adults.
3.5 For full dimensions, please go to LArans website > Support > Download https://www.MyLumens.com/Support

4. Instruction for installation steps

4.1 To install Ceiling locking Platform

Use *3 pcs of anchors (wall plugs) and screws to install the ceiling locking platform to the ceiling
* For mounting 3 pcs screws, please refer to the corresponding location of A and B in the figure below. Please do not mount arbitrarily to prevent insecure installation
* Pass through cables from the center hole of the ceiling locking platform and the bracket. Be aware that the pass thru feature is not designed to accommodate large HDMI, RS-232 or SDI connectors.

4.2 Screw the bracket into the platform for security

Pure mechanical diagram showing a threaded fastener inserted into a plate, with no text or symbols present.

4.3 Mount the Camera

Securely attach the camera to the PTZ mount.

4.4 Adjust the bracket height and the angle of the camera

Adjust the bracket height: Rotate the regulating ring and the bracketin in order to move the head up or down.

* After adjustment, be sure to tighten the regulating ring firmly
Change the tilt position of the camera using the Angle Adjustment Knob.

Pure mechanical diagram showing a pipe with rotating components and a valve mechanism (no text or symbols)

Copyright ©2021 Lumens Digital Optics Inc. All rights reserved.