OIP-D50E - Digital decoder Lumens - Free user manual and instructions
Find the device manual for free OIP-D50E Lumens in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Decoder |
| Brand | Lumens |
| Model | OIP-D50E |
| Video Decoding | H.264, H.265, MPEG-2 up to 1080p |
| Audio Decoding | MPEG-1 Layer II, AAC, AC3 |
| Network Interface | 10/100/1000 Base-T Ethernet |
| Video Outputs | HDMI, Composite Video |
| Audio Outputs | Analog L/R, Digital Coaxial |
| Control Interface | RS-232, IR Remote |
| Dimensions (W x D x H) | 250 x 180 x 45 mm |
| Weight | 1.2 kg |
| Power Supply | DC 12V, 2.0A |
| Power Consumption | 15 W (max) |
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -20°C to 60°C |
| Main Functions | Digital video decoding, streaming, IPTV, video distribution |
| Cleaning | Wipe with a dry, soft cloth. Do not use liquids. |
| Safety | Keep away from moisture; do not block vents; use only supplied adapter. |
| Spare Parts / Repairability | Contact Lumens support for replacement parts. |
| Compliance | CE, FCC, RoHS |
Frequently Asked Questions - OIP-D50E Lumens
How do I connect the OIP-D50E to my network?
Connect an Ethernet cable from your router or switch to the LAN port on the back of the decoder. Ensure the network supports DHCP or configure a static IP via the web interface.
What video formats does the decoder support?
The OIP-D50E supports H.264, H.265, and MPEG-2 video streams up to 1080p resolution.
Can I use the decoder without a remote control?
Yes, you can control the decoder via RS-232 serial commands or the web interface. A remote control is optional.
How do I update the firmware?
Download the latest firmware from the Lumens support website. Access the decoder's web interface, go to System > Firmware Update, and upload the file. Do not power off during update.
The decoder does not output video. What should I check?
Verify the HDMI cable is securely connected. Check the video source settings and ensure the decoder is receiving a valid stream. Also, confirm the output resolution is supported by your display.
What is the default IP address of the decoder?
The default IP is 192.168.1.100 with subnet mask 255.255.255.0. If your network uses a different range, you may need to reset the decoder to factory defaults.
How can I reset the decoder to factory settings?
Press and hold the Reset button on the rear panel for 10 seconds using a paperclip. Alternatively, use the web interface under System > Factory Reset.
Is the OIP-D50E compatible with HDCP?
The decoder supports HDCP 1.4 on the HDMI output. If you experience issues with protected content, ensure your display is HDCP-compliant.
Can I stream multiple channels simultaneously?
The OIP-D50E is a single-channel decoder. It decodes one video stream at a time. For multi-channel decoding, consider using multiple units.
What type of power adapter is required?
Use only the supplied DC 12V, 2.0A power adapter. Using an incompatible adapter may damage the device.
User questions about OIP-D50E Lumens
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Digital decoder in PDF format for free! Find your manual OIP-D50E - Lumens and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OIP-D50E by Lumens.
USER MANUAL OIP-D50E Lumens
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Lumens
Model : OIP-D50E
Category : Digital decoder