Glacier TG-04 - Thermal paste Savio - Free user manual and instructions

Product Type	Thermal Paste
Brand	Savio
Model	Glacier TG-04
Thermal Conductivity	4.5 W/m·K
Viscosity	Medium, easy to apply
Color	Grey
Content	4 grams syringe
Application Area	CPU, GPU, and other heat-generating components
Temperature Range	-50°C to 200°C
Electrical Conductivity	Non-conductive
Corrosion Resistance	Corrosion-free, non-drying
Shelf Life	2 years (unopened)
Storage Condition	Cool, dry place away from direct sunlight
Application Method	Apply a small dot or line, then spread evenly
Curing Time	No curing needed; immediate performance
Safety	Non-toxic, lead-free, RoHS compliant
Cleaning	Remove with isopropyl alcohol or thermal paste remover
Packaging	Syringe with cap
Warranty	24 months
Compatible Devices	All CPUs, GPUs, and heatsinks

Frequently Asked Questions - Glacier TG-04 Savio

How much thermal paste should I apply?

Apply a small pea-sized drop (about 0.5g) in the center of the CPU. The pressure from the heatsink will spread it evenly. Do not apply too much, as it may reduce efficiency and cause mess.

Is Glacier TG-04 conductive?

No, it is non-conductive and safe to use on sensitive electronics. It will not cause short circuits if accidentally spilled.

How do I remove old thermal paste?

Use isopropyl alcohol (90% or higher) and a lint-free cloth or coffee filter. Gently wipe off the old paste from both CPU and heatsink until clean.

Can I use this paste on a laptop GPU?

Yes, it is suitable for both CPU and GPU, including laptops. Ensure proper disassembly and apply a small amount.

How often should I replace thermal paste?

Every 2-3 years for optimal performance, or when you notice higher temperatures. The paste dries over time, reducing thermal transfer.

What is the thermal conductivity of Glacier TG-04?

It has a thermal conductivity of 4.5 W/m·K, providing efficient heat transfer for most applications.

Does this paste require curing time?

No, it provides full performance immediately after application. However, optimal temperature may be reached after a few heat cycles.

Is it safe for use with liquid metal compounds?

It is not a liquid metal paste; it's a standard silicone-based paste. Do not mix with liquid metal. Apply only as directed.

Can I reuse the paste if I remove the heatsink?

No, once applied and compressed, the paste loses its uniformity. You should clean both surfaces and reapply fresh paste.

How should I store the syringe?

Store in a cool, dry place below 30°C and away from direct sunlight. Keep the cap sealed to prevent drying. Shelf life is about 2 years.

USER MANUAL Glacier TG-04 Savio

Thank you for choosing Savio product!

If our product meets your expectations, share your opinion with other people on the portal ceneo.pl, on social media or on the website of the store where you made the purchase. If you want to show off our device on SAVIO FanPage on Facebook, we will be very pleased.

If there is something that we could improve on our products, please write to us at [e-mail]

Thanks to your feedback, we will be able to better adapt the product to your expectations.

Before starting the use of purchased device it is recommended to read the whole manual.

1. Technical specification*:

	TG-01 TG-02 TG-03 TG-04
Thermal conductivity:	4.7 W/m·K	8.5 W/m·K 13.5	W/m·K 14.5	W/m·K
Working temperature:	-50 - 250°C	-50 - 250°C	-50 - 250°C	-50 - 280°C
Thermal impedance:	<0.155 °C · in 2 /W	<0.135 °C · in 2 /W	<0.102 °C · in 2 /W	<0.095 °C · in 2 /W
Density:	2.5 ± 0.08 g/ml	2.6 ± 0.08 g/ml	2.9 ± 0.08 g/ml	2.8 ± 0.08 g/ml
Electrical conductivity:	0 pS/m 0	pS/m 0 pS/m	0 pS/m

*Depending on the model purchased.

2. Package content:

• SAVIO GLACIER thermal grease
- User manual
- Spatula for spreading the grease

3. Applying thermal grease:

3.1 Clean the processor IHS surface and the radiator base with a dry cloth or Isopropyl Alcohol.
3.2 Spread a thin layer of thermal grease over the processor IHS with a spatula added to the set. Alternatively, you can apply a 3 × 3 mm drop of the grease in the middle

of the IHS.

3.3 Assemble the cooling system of the processor. The best method is to screw in the opposite corners of the frame. It allows even spreading of the grease.

3.4 After mounting the cooling system, check if there are no leakages. If leakages appear, it means that there is too much grease applied. You have to clean the excess with a dry cloth or Isopropyl Alcohol.

4. Additional information:

While storing, the grease can discharge trace amounts of silicone oil. That is normal and does not have any detrimental effect on grease efficiency. The paste should be re-mixed during the application.

5. Safety conditions:

- Keep out of reach of children.

- It is forbidden to consume the product.

- In case of contact with the eye, you need to wash your eyes with a substantial amount of water.

- In case of inhaling fumes from the grease, it is necessary to go outside to breathe fresh air for a while.

• In case of ingestion it is not necessary to induce vomiting. Rinse your mouth with plenty of water.
• If you notice any side effects, not mentioned above, please contact medical support.

Information for customers and contractors and communication regarding complaints:

Pursuant to Article 13 section 1 and 2 of the General Data Protection Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 (hereinafter referred to as GDPR), please be advised that Elmak Sp. z o.o., with its registered seat at ul. Morgowa 81; 35-323 Rzeszów becomes the Administrator of your personal data. The Specialist for General Data Protection (SODO) can be contacted in writing to: SODO, Elmak Sp. z o.o., ul. Morgowa 81; 35-323 Rzeszów, via e-mail address: [e-mail], and by phone at [phone]. Your personal data will be processed in order to perform the contract, in accordance with Article 6(1)(b) of the aforementioned regulation, to the extent resulting from tax laws and financial regulations. Recipients of your personal data include entities authorized by legal regulations to

obtain personal data as well as processing entities providing services to Elmak Sp. z o.o. Your personal data will be stored on the basis of Administrator's legitimate interest. You have the right to access your data, and the right to rectify, delete or limit processing of your data. You have the right to lodge a complaint to the supervisory body if you believe that the processing violates the GDPR. The provision of personal data is voluntary, however, a failure to provide such data may result in a refusal to conclude or in termination of a contract. Your personal data will not be subjected to automated decision making, including profiling referred to in Article 22 section 1 and 4 of the GDPR of April 27, 2016.

LET'S PLAY 2GETHER!

POLSKI

Instrukcja obsługi