Glacier TG-01 - Thermal paste Savio - Free user manual and instructions

Product Type	Thermal Paste
Brand	Savio
Model	Glacier TG-01
Thermal Conductivity	4.5 W/mK
Weight	2 g
Color	Grey
Viscosity	Medium
Application Method	Syringe
Operating Temperature	-50°C to 200°C
Shelf Life	24 months
Composition	Silicone-based with carbon particles
Non-Electrically Conductive	Yes
Non-Capacitive	Yes
Toxicity	Non-toxic
Package Contents	1 syringe of paste, spatula
Dimensions (Syringe)	10 cm x 2 cm
Storage	Cool, dry place
Cleaning	Isopropyl alcohol recommended
Key Features	High thermal transfer, easy application
Compatibility	CPU, GPU, chipsets
Safety Precautions	Avoid contact with eyes and skin
Recyclability	Packaging is recyclable

Frequently Asked Questions - Glacier TG-01 Savio

How do I apply the Savio Glacier TG-01 thermal paste?

Apply a pea-sized amount to the center of the CPU or GPU. Then, attach the heatsink and let the pressure spread it evenly. Alternatively, you can spread it with the included spatula.

How often should I replace the thermal paste?

It is recommended to replace thermal paste every 1-2 years, or whenever you reseat your heatsink, to maintain optimal thermal transfer.

Is the Savio Glacier TG-01 electrically conductive?

No, it is non-electrically conductive, making it safe to use on sensitive components without risk of short circuits.

How do I remove old thermal paste?

Use isopropyl alcohol (preferably 90% or higher) and a lint-free cloth or cotton swab to gently wipe off the old paste until the surface is clean.

Can I use this thermal paste on a laptop?

Yes, the Savio Glacier TG-01 is suitable for laptops as well as desktops. The application process is the same.

Does the package include a spatula or applicator?

Yes, you will find a spatula included to help you spread the paste evenly.

What is the thermal conductivity of the Glacier TG-01?

The thermal conductivity is 4.5 W/mK, providing efficient heat transfer between the chip and the heatsink.

Is the thermal paste toxic?

The paste is non-toxic, but you should avoid ingestion and contact with eyes or skin. Wash hands thoroughly after use.

Can I use this paste with liquid cooling systems?

Yes, it works with both air and liquid cooling solutions. The thermal paste is applied to the CPU or GPU before mounting the cooling block.

How much thermal paste should I apply?

A small pea-sized drop is sufficient for a CPU. Applying too much can reduce thermal efficiency and may ooze out.

USER MANUAL Glacier TG-01 Savio

Thank you for choosing Savio product!

If our product meets your expectations, share your opinion with other people on the portal ceneo.pl, on social media or on the website of the store where you made the purchase. If you want to show off our device on SAVIO FanPage on Facebook, we will be very pleased.

If there is something that we could improve on our products, please write to us at [e-mail]

Thanks to your feedback, we will be able to better adapt the product to your expectations.

Before starting the use of purchased device it is recommended to read the whole manual.

1. Technical specification*:

	TG-01 TG-02 TG-03 TG-04
Thermal conductivity:	4.7 W/m·K	8.5 W/m·K 13.5	W/m·K 14.5	W/m·K
Working temperature:	-50 - 250°C	-50 - 250°C	-50 - 250°C	-50 - 280°C
Thermal impedance:	<0.155 °C · in 2 /W	<0.135 °C · in 2 /W	<0.102 °C · in 2 /W	<0.095 °C · in 2 /W
Density:	2.5 ± 0.08 g/ml	2.6 ± 0.08 g/ml	2.9 ± 0.08 g/ml	2.8 ± 0.08 g/ml
Electrical conductivity:	0 pS/m 0	pS/m 0 pS/m	0 pS/m

*Depending on the model purchased.

2. Package content:

• SAVIO GLACIER thermal grease
- User manual
- Spatula for spreading the grease

3. Applying thermal grease:

3.1 Clean the processor IHS surface and the radiator base with a dry cloth or Isopropyl Alcohol.
3.2 Spread a thin layer of thermal grease over the processor IHS with a spatula added to the set. Alternatively, you can apply a 3 × 3 mm drop of the grease in the middle

of the IHS.

3.3 Assemble the cooling system of the processor. The best method is to screw in the opposite corners of the frame. It allows even spreading of the grease.

3.4 After mounting the cooling system, check if there are no leakages. If leakages appear, it means that there is too much grease applied. You have to clean the excess with a dry cloth or Isopropyl Alcohol.

4. Additional information:

While storing, the grease can discharge trace amounts of silicone oil. That is normal and does not have any detrimental effect on grease efficiency. The paste should be re-mixed during the application.

5. Safety conditions:

- Keep out of reach of children.

- It is forbidden to consume the product.

- In case of contact with the eye, you need to wash your eyes with a substantial amount of water.

- In case of inhaling fumes from the grease, it is necessary to go outside to breathe fresh air for a while.

• In case of ingestion it is not necessary to induce vomiting. Rinse your mouth with plenty of water.
• If you notice any side effects, not mentioned above, please contact medical support.

Information for customers and contractors and communication regarding complaints:

Pursuant to Article 13 section 1 and 2 of the General Data Protection Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 (hereinafter referred to as GDPR), please be advised that Elmak Sp. z o.o., with its registered seat at ul. Morgowa 81; 35-323 Rzeszów becomes the Administrator of your personal data. The Specialist for General Data Protection (SODO) can be contacted in writing to: SODO, Elmak Sp. z o.o., ul. Morgowa 81; 35-323 Rzeszów, via e-mail address: [e-mail], and by phone at [phone]. Your personal data will be processed in order to perform the contract, in accordance with Article 6(1)(b) of the aforementioned regulation, to the extent resulting from tax laws and financial regulations. Recipients of your personal data include entities authorized by legal regulations to

obtain personal data as well as processing entities providing services to Elmak Sp. z o.o. Your personal data will be stored on the basis of Administrator's legitimate interest. You have the right to access your data, and the right to rectify, delete or limit processing of your data. You have the right to lodge a complaint to the supervisory body if you believe that the processing violates the GDPR. The provision of personal data is voluntary, however, a failure to provide such data may result in a refusal to conclude or in termination of a contract. Your personal data will not be subjected to automated decision making, including profiling referred to in Article 22 section 1 and 4 of the GDPR of April 27, 2016.

LET'S PLAY 2GETHER!

POLSKI

Instrukcja obsługi