EK43 - Kettle Duronic - Free user manual and instructions
Find the device manual for free EK43 Duronic in PDF.
| Product Type | Electric Kettle |
| Model | EK43 |
| Brand | Duronic |
| Capacity | 1.7 Liters |
| Power | 1500-2200 W |
| Voltage | 220-240 V, 50-60 Hz |
| Material | Stainless Steel Body, Plastic Lid |
| Dimensions (L x W x H) | Approx. 25 x 20 x 25 cm |
| Weight | Approx. 1.2 kg |
| Cordless Base | Yes, 360° rotation |
| Auto Shut-Off | Yes, after boiling |
| Boil-Dry Protection | Yes, automatic shut-off when empty |
| Water Level Indicator | Yes, on both sides |
| Concealed Heating Element | Yes, for easy cleaning |
| Filter | Removable scale filter |
| Lid Opening | One-touch button for wide opening |
| Cord Length | Approx. 70 cm |
| Cleaning Instructions | Wipe exterior with damp cloth; descale interior with vinegar or citric acid |
| Safety Features | Auto shut-off, boil-dry protection, overheat protection |
| Spare Parts Availability | Replacement lids, bases, and filters available from Duronic |
| Repairability | Designed for limited disassembly; professional repair recommended |
Frequently Asked Questions - EK43 Duronic
User questions about EK43 Duronic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Kettle in PDF format for free! Find your manual EK43 - Duronic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EK43 by Duronic.
USER MANUAL EK43 Duronic
Creative Consumer Products

EK43
Electric Kettle
PLEASE READ ALL THE INSTRUCTIONS BEFORE USE

duronic.com

duronic

@duronicmedia

Duronic

@duronicmedia
Features and Specifications
| Dimensions Cable Length | Water Capacity | Power Voltage | ||
| 24.5x23.5x15cm9.6x9.3x5.9in | 70cm27.5in | 1.7L 3000W | 220-240V50-60Hz | |
Components

- Control panel
- Temperature
- On / Off button
- Temperature button
- Handle
-
Lid handle
-
Refill door
- Lid
- Spout
- Water level gauge
- Power base
DURONIC
Safety Information
PLEASE READ THIS MANUAL CAREFULLY AND RETAIN FOR FUTURE REFERENCE
- This appliance is for indoor/household use only. Do not use outdoors.
- This appliance is not designed for commercial or industrial use; it is for household use only.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
- Children should be closely supervised at all times to ensure that they do not play with the appliance.
- Only use the kettle out of the reach of children because the contents get very hot.
- Do not operate this appliance if the power cable or plug is damaged. If either is damaged, return it to Duronic for service or repair by a professional technician.
- Never try to replace the parts and repair the unit by yourself. Do not modify the appliance in any way that is not described in the instructions for use. The machine contains live parts. Repairs may only be carried out by Duronic, using original spare parts and accessories.
- If an extension lead/cable is needed to reach the appliance to a mains power socket that is too far away out of reach of the machine's accompanying cable, please ensure that:
- the marked electrical rating of the extension lead is at least as great as the electrical rating of the appliance;
- the extension lead is of the grounded type.
- no other appliance is plugged into the same extension lead.
- the extension cable is safely positioned to avoid it being pulled on by children or animals or being tripped over.
DURONIC
Safety Information (Continued)
• Always operate the appliance on a dry, smooth, even and stable surface. Do not place the kettle on or next to a hot surface.
- Position the kettle and its power cable to the rear of the work surface, well out of reach of children.
• Take care that any steam escaping from the kettle might damage wallpaper, wall cabinets or other items positioned above it. Turn the spout away from furniture and walls.
- Disconnect the mains plug from the power socket if you are going to be absent for long periods.
- Never disconnect the plug by pulling on the power cable.
- Unplug from the mains plug outlet when not in use and before cleaning. Allow the appliance to cool down before cleaning the appliance.
- This appliance is not intended to be operated using an external timer or separate remote-control system.
- Do not let the power cable hang over the edge of the table or counter, or touch hot surfaces.
- Do not use the appliance for anything other than boiling water.
- Do not operate the kettle with wet hands.
- Do not overfill the kettle past the MAX line. If the kettle is too full, some water may spill out. The maximum capacity of this kettle is 1.7L.
- Do not switch on the kettle if it is empty. Ensure that at the very least the water level reaches up to the MIN line (0.5L).
- Never open the lid while the water is boiling.
- Do not move the kettle while it is switched on.
• Always remain vigilant when the appliance is on. Be careful of the steam coming out of the spout which is very hot.
DURONIC
Safety Information (Continued)
- Rising steam can scald. Do not touch the steam emitted from the spout or the boiling water.
- During operation, the body of the kettle will be hot and may burn. Hold the kettle by the handle only.
- When pouring, keep a safe distance from the hot water and steam.
- Be careful to avoid any spillage on the connector during cleaning, filling or pouring.
- To clean, wipe the unit body with a well-wrung wet cloth. Do not submerge the kettle in water or other liquids.
Before First Use
- Remove all of the packaging materials. Check that there are no parts missing.
- Clean the outside of the kettle body by wiping it with a wet well-wrung sponge or cloth.
- Ensure that the spout filter is fitted in the spout properly.
- Fill the kettle with 600ml water and 600ml vinegar (a ratio of 1:1 of water and vinegar). Switch on the kettle and bring it to the boil. Once boiled, allow to cool for few minutes and then empty into the kitchen sink.
- Allow the kettle to cool down, then refill with fresh water and bring it to a boil again. Once boiled, empty the water out into the sink. Repeat this step two more times.
DURONIC
Operating Instructions
- Place your kettle onto your kitchen countertop positioned to the rear of the surface. Plug the power cable into the closest mains plug socket.
- Fill the kettle with the amount of water you require. You can open the lid via the Lid handle, or pour the water directly into the kettle using the Refill door located on the lid. Do not fill with more than 1.7 litres of water.
- Make sure the lid is closed before continuing.
- If you see no lights flashing on the Control panel, press the On / Off button to turn the kettle on.
- When there is power going to the kettle, one of the lights for the temperature will flash. Change the temperature setting of the kettle by pressing the Temperature button on the Control Panel.
- Press the On / Off button once to begin boiling. The temperature indicator stay continuously lit when the kettle boils the water. The kettle will turn off automatically once the water has boiled. If you wish to stop the kettle before it has finished boiling the water, press the On / Off button.
- After the water has come to a boil, wait a moment until the water has stopped simmering. Then remove the kettle from the base.
- Pour the water out slowly to avoid splashing. Do not open the lid while pouring out the water.
- The kettle won't reboil until the switch is pressed again. Store the kettle on the power base when not in use.
Boil-Dry Protection
Should the kettle operate without water, the boil-dry protection will automatically switch off the power. If this occurs, allow the kettle to cool before refilling with cold water and reboiling.
DURONIC
Cleaning and Maintenance
It is important to clean and descale your kettle regularly to remove any limescale. This will extend the life of your kettle. You may need to descale your kettle more frequently depending on the hardness of your water and how frequently you use the kettle.
Before Cleaning
- Unplug the kettle and allow it to cool down completely before cleaning it.
- Do not get the base or electric parts wet or submerge them in water or any other liquid.
- Do not use abrasive materials or chemicals to clean the kettle.
Cleaning and Descaling
- Clean the outside of the kettle body by wiping it with a wet well-wrung sponge or cloth.
- You can remove the filter located inside the spout to clean separately.
- To clean and descale inside the kettle, fill the kettle with 600ml water and 600ml distilled white vinegar (a ratio of 1:1 of water and vinegar). Plug in and switch on the kettle and bring it to the boil. Once boiled, allow to cool for few minutes and then empty into the kitchen sink.
- Allow the kettle to cool down, then refill with fresh water and bring it to the boil again. Once boiled, empty the water into the sink. Repeat this step two more times.
Note: If using a commercial descaling product, follow the instructions that come with the descaler.
DURONIC
WEEE
Information for consumers on the disposal of Waste Electrical & Electronic Equipment (WEEE).
This mark on a product and/or accompanying documents indicates that when it is to be disposed of, it must be treated as Waste Electrical & Electronic Equipment, (WEEE).
Any WEEE marked products must not be mixed with general household waste, but kept separate for the treatment, recovery and recycling of the materials used. For proper treatment, recovery and recycling; please take all WEEE marked waste to your Local Authority Civic waste site, where it will be accepted free of charge.
If customers dispose of Waste Electrical & Electronic Equipment correctly, they will be helping to save valuable resources and preventing any potential negative effects upon human health and the environment, of any hazardous materials that the waste may contain.