Duronic

OX02 - Heart Rate Monitor Duronic - Free user manual and instructions

Find the device manual for free OX02 Duronic in PDF.

📄 124 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Duronic OX02 - page 4
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Heart Rate Monitor
Brand Duronic
Model OX02
Weight 30 g
Power Supply CR2032 battery (included)
Display Backlit LCD screen
Heart Rate Measurement Range 30 to 240 beats per minute
Accuracy ±5%
Main Functions Continuous measurement, clock, stopwatch, alarm clock
Memory History of the last 7 days
Water Resistance IP67 (waterproof up to 1 meter for 30 minutes)
Strap Silicone, adjustable length (160-220 mm)
Maintenance and Cleaning Wipe with a soft, damp cloth. Avoid abrasive products.
Safety This is not a medical device. Consult a doctor if in doubt.
Spare Parts and Repairability User-replaceable battery. The strap is interchangeable.
General Information Ideal for sports and daily heart rate monitoring.

Frequently Asked Questions - OX02 Duronic

How to install the battery of the Duronic OX02?
Open the compartment on the back of the device using a coin. Insert a CR2032 battery respecting polarity (+ facing up). Close carefully.
Is the OX02 waterproof?
Yes, it is certified IP67, meaning it is resistant to immersion up to 1 meter for 30 minutes. However, avoid water pressure (shower, swimming).
How to wear the heart rate monitor correctly?
Place the strap around your wrist, just above the bone. Tighten it comfortably without over-tightening. The sensor on the back must be in contact with the skin.
What to do if the device does not display heart rate?
Check that the battery is properly inserted and the sensor is clean. Adjust the strap position. If the problem persists, contact customer service.
How to set the time on the OX02?
Hold the main button for 3 seconds to enter the settings menu. Use the buttons to change hours and minutes. Confirm by pressing again.
Does the screen stay on permanently?
The screen turns off after a few seconds of inactivity to save battery. Pressing the button turns it back on. You can activate sleep mode.
How long does the battery last?
The CR2032 battery lasts about 6 months with normal use (2-3 hours per day). This may vary depending on backlight usage frequency.
What are the warranties on the product?
The Duronic OX02 is covered by a 2-year manufacturer warranty against manufacturing defects. Keep your receipt.
Can I use the OX02 during sports?
Yes, it is designed for sports. It continuously measures heart rate and has a stopwatch. However, make sure it is well adjusted to avoid slipping.
How to clean the strap?
Remove the strap and wash it with warm water and mild soap. Rinse thoroughly and dry before putting it back on. Avoid chemical products.

User questions about OX02 Duronic

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Heart Rate Monitor in PDF format for free! Find your manual OX02 - Duronic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OX02 by Duronic.

USER MANUAL OX02 Duronic

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Duronic

Model : OX02

Category : Heart Rate Monitor