B110H65RT - Air Conditioning BROAN - Free user manual and instructions
Find the device manual for free B110H65RT BROAN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Window Air Conditioner |
| Brand | Broan |
| Model | B110H65RT |
| Cooling Capacity (BTU/h) | 11000 |
| Power Supply | 115 V / 60 Hz |
| Current Draw | 10.5 A |
| Energy Efficiency Ratio (EER) | 10.8 |
| Dimensions (W x H x D) | 26.0 x 18.5 x 22.0 inches |
| Weight | 78 lbs |
| Airflow (CFM) | 350 |
| Noise Level (dB) | 52 (Low) / 62 (High) |
| Control Type | Remote control and electronic touch panel |
| Fan Speeds | 3 (Low, Medium, High) |
| Filter Type | Washable mesh filter |
| Refrigerant | R-32 |
| Installation Type | Window or through-wall |
| Warranty | 1 year parts and labor |
| Special Features | Timer, sleep mode, auto restart, dehumidify |
| Energy Star Rated | Yes |
| Certification | UL listed |
Frequently Asked Questions - B110H65RT BROAN
How do I install the Broan B110H65RT air conditioner?
Installation requires a standard window opening (min 26 inches wide) or through-wall kit. Follow the manual: attach side curtains, place unit in window, lower sash, extend curtains, and secure with brackets and screws. Ensure proper seal and support.
How often should I clean the air filter?
Clean the washable mesh filter every two weeks during heavy use. Remove filter by pulling down the front grille, wash with mild soap and water, dry completely, and reinstall.
How do I set the timer on this unit?
Press the Timer button on the remote or control panel. Use +/- to set delay time (0.5 to 24 hours). Press Timer again to confirm. The unit will turn on/off after the set delay.
What does error code E1 mean?
Error code E1 indicates a temperature sensor malfunction. Unplug the unit for 5 minutes, then restart. If persistent, contact customer service.
How do I use the remote control?
Aim the remote control at the unit’s receiver. Press Power to turn on/off, Mode to select Cool/Dry/Fan, Temp +/- to adjust, Fan Speed to cycle speeds. Replace batteries (2 AAA) when needed.
How do I drain water from the unit?
In dehumidify mode, water collects in the base pan. For continuous drain, attach a garden hose to the rear drain connector (3/4 inch thread). Gravity drain: ensure slight tilt down.
What is the cooling capacity of the B110H65RT?
The cooling capacity is 11,000 BTU/h, suitable for rooms up to 450-500 sq. ft. depending on insulation and climate.
Is the Broan B110H65RT Energy Star rated?
Yes, this model is Energy Star certified with an EER of 10.8, meeting federal efficiency standards.
How do I change the fan speed?
Press the Fan Speed button on the remote or control panel to cycle through Low, Medium, and High. The display shows the current speed setting.
How do I reset the unit?
To reset, unplug the air conditioner from the power outlet for 10 minutes, then plug back in. This clears any electronic glitches. For hard reset, hold the Reset button (if available) with a paper clip.
User questions about B110H65RT BROAN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual B110H65RT - BROAN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. B110H65RT by BROAN.