BNAP-100 - Air Conditioning BROAN - Free user manual and instructions
Find the device manual for free BNAP-100 BROAN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Mobile Air Conditioner |
| Brand | Broan |
| Model | BNAP-100 |
| Cooling Capacity | 10,000 BTU/h (approximately 2.9 kW) |
| Power Consumption | Approximately 1,000 W |
| Power Supply | 220-240 V ~ 50 Hz |
| Dimensions (W x D x H) | 43 x 38 x 72 cm |
| Net Weight | Approximately 28 kg |
| Refrigerant | R410A |
| Noise Level | Approximately 55 dB(A) |
| Operating Modes | Cooling, Dehumidification, Fan |
| Control | Touch Panel + Remote Control |
| Timer | 24-hour Programmable |
| Night Mode | Yes |
| Condensate Drainage | Auto-Evaporation (collection tank) |
| Installation Kit | Sliding Window Kit Included |
| Air Filter | Washable and Reusable |
| Maintenance | Monthly filter cleaning |
| Safety | Overheat protection, automatic shutdown |
| Spare Parts | Filters, remote control, exhaust hose available |
| Repairability | Repairability index: 7.5/10 |
Frequently Asked Questions - BNAP-100 BROAN
How to install the window kit for the BNAP-100?
The window kit fits sliding windows. Measure the opening, adjust the kit to the width, secure it in the window, then connect the hot air exhaust hose.
How often should I clean the air filter?
Clean the air filter every month during the season of use. Wash it with warm soapy water, rinse and dry completely before reinstalling.
How to empty the water collection tank?
The BNAP-100 uses auto-evaporation to drain most condensate. In case of very high humidity, a collection tank may fill; empty it through the drain plug at the back.
What to do if the appliance is not cooling enough?
Check that the filter is clean, the exhaust hose is not blocked, and the window is sealed properly around the kit. Make sure the selected power corresponds to the room size.
How to use the remote control?
Insert two AAA batteries (not included). Point the remote at the unit's receiver. Use the buttons to turn on/off, adjust temperature, fan speed, and timer.
Can I use the BNAP-100 without an exhaust hose?
No, the hot air exhaust hose is required for operation in cooling mode. Without it, hot air stays in the room and the unit will not cool effectively.
What do error codes mean?
Error codes are displayed on the panel. For example, E1 indicates a temperature sensor fault, E2 an evaporator sensor fault. Refer to the manual for the full list of codes.
How to activate night mode?
Press the Sleep button (or Night Mode) on the remote. Night mode gradually reduces noise and adjusts temperature for comfortable sleep.
The appliance turns off by itself, what to do?
This may be due to a programmed timer, full water tank, or overheating. Check the indicators, empty the tank if necessary, and ensure air inlets are not blocked.
Where to find spare parts for the BNAP-100?
Spare parts (filters, remote control, hose) are available from Broan after-sales service or specialized websites. Always use genuine parts.
User questions about BNAP-100 BROAN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual BNAP-100 - BROAN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BNAP-100 by BROAN.
USER MANUAL BNAP-100 BROAN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BROAN
Model : BNAP-100
Category : Air Conditioning