OVEM-14-H-B-GO-CE-N-1P - Industrial Automation Festo - Free user manual and instructions
Find the device manual for free OVEM-14-H-B-GO-CE-N-1P Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pneumatic Valve Terminal |
| Model | OVEM-14-H-B-GO-CE-N-1P |
| Number of Valves | 14 |
| Valve Function | 5/2-way solenoid actuated, single or double pilot |
| Port Size | G1/8 or G1/4 (depending on configuration) |
| Flow Rate (per valve) | 100-200 l/min (at 6 bar) |
| Operating Pressure Range | 3 to 8 bar |
| Power Supply | 24 V DC |
| Power Consumption (max) | 2.5 W per valve (solenoid) |
| Dimensions (L x W x H) | Approx. 280 x 100 x 60 mm |
| Weight | Approx. 1.8 kg |
| Ambient Temperature | 0 to 50 °C |
| Protection Class | IP40 |
| Electrical Connection | Multi-pin connector (e.g., 25-pin D-sub) |
| Pneumatic Connection | Push-in fittings for PU/PU tubing |
| Certifications | CE, cULus, RoHS |
| Maintenance | Clean with low-pressure compressed air; replace seals every 500k cycles |
| Safety Instructions | Disconnect power and air supply before servicing |
| Spare Parts | Seal kits, solenoid coils, valve spools |
| Reparability | Modular design; individual valves replaceable on-site |
Frequently Asked Questions - OVEM-14-H-B-GO-CE-N-1P Festo
What is the operating voltage of the Festo OVEM-14-H-B-GO-CE-N-1P?
The standard operating voltage is 24 V DC. Always verify the voltage before connecting.
How many valves does this terminal have?
It has 14 valves, typically 5/2-way solenoid actuated.
What is the maximum flow rate per valve?
Approximately 100-200 l/min at 6 bar, depending on the valve size and type.
What type of electrical connection is used?
It usually uses a multi-pin connector, e.g., a 25-pin D-sub or similar.
What is the recommended air supply pressure?
The recommended operating pressure range is 3 to 8 bar.
How to clean and maintain the valve terminal?
Clean with low-pressure compressed air. Replace seals every 500,000 cycles or as needed.
Can I repair the terminal on-site?
Yes, the modular design allows replacement of individual valves and coils without special tools.
What does the model number OVEM-14-H-B-GO-CE-N-1P indicate?
OVEM is the series, 14 = number of valves, H = design variant, B = valve type, GO = function, CE = certification, N = voltage code, 1P = single pressure.
What spare parts are available?
Common spare parts include seal kits, solenoid coils, and valve spools.
What safety precautions should be taken?
Always disconnect electrical power and air supply before servicing to prevent accidental actuation.
User questions about OVEM-14-H-B-GO-CE-N-1P Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Industrial Automation in PDF format for free! Find your manual OVEM-14-H-B-GO-CE-N-1P - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OVEM-14-H-B-GO-CE-N-1P by Festo.