SFAH-0.1U-G18FS-PNLK-PNVBA-L1 - Industrial Automation Festo - Free user manual and instructions
Find the device manual for free SFAH-0.1U-G18FS-PNLK-PNVBA-L1 Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pneumatic Silencer / Exhaust Muffler |
| Model | SFAH-0.1U-G18FS-PNLK-PNVBA-L1 |
| Connection Thread | G1/8 (ISO 228/1) |
| Operating Pressure | 0 to 10 bar |
| Ambient Temperature | -10°C to 60°C |
| Sound Level Reduction | Approx. 30-40 dB(A) depending on flow |
| Material (Housing) | Brass, Nickel-plated |
| Material (Filter Element) | Sintered Bronze |
| Mounting Type | Direct connector |
| Weight | Approx. 12 g |
| Dimensions (Length) | 31.5 mm |
| Dimensions (Diameter) | 14 mm |
| Media | Compressed air, inert gases |
| Maintenance | Periodic cleaning or replacement of filter element; no lubrication required |
| Safety Instructions | Do not exceed maximum pressure; use with compatible media only; ensure proper thread engagement |
| Spare Parts | Filter element available separately (order number: on request) |
| Repairability | Non-repairable; replace entire unit if damaged |
| Standards / Certifications | RoHS, REACH compliant |
Frequently Asked Questions - SFAH-0.1U-G18FS-PNLK-PNVBA-L1 Festo
How do I install the Festo SFAH-0.1U silencer?
Screw the silencer directly onto the exhaust port (G1/8 female thread) using a suitable tool. Tighten to 5-7 Nm. Ensure the thread is clean and apply a sealant if needed.
What is the maximum operating pressure for this silencer?
The maximum operating pressure is 10 bar (145 psi). Do not exceed this limit to avoid damage.
Can the silencer be cleaned and reused?
Yes, the sintered bronze element can be cleaned with compressed air (blow from inside out) or with mild detergent if heavily clogged. Replace if damaged.
What is the sound level reduction of this silencer?
The SFAH-0.1U reduces exhaust noise by approximately 30-40 dB(A) under typical flow conditions.
Is the silencer suitable for vacuum applications?
No, this silencer is designed for exhaust air only. Not recommended for vacuum.
What type of media can be used with this silencer?
It is designed for compressed air and inert gases. Do not use with aggressive or corrosive fluids.
What is the weight of the Festo SFAH-0.1U?
The weight is approximately 12 grams.
Does the silencer require any maintenance?
Periodically check for clogging. Clean the filter element if necessary. No lubrication required.
Can I use thread seal tape on the connection?
Yes, apply a thin layer of PTFE tape to the male thread before installation to ensure a tight seal.
Is the Festo SFAH-0.1U RoHS compliant?
Yes, this product complies with RoHS and REACH directives.
User questions about SFAH-0.1U-G18FS-PNLK-PNVBA-L1 Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Industrial Automation in PDF format for free! Find your manual SFAH-0.1U-G18FS-PNLK-PNVBA-L1 - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SFAH-0.1U-G18FS-PNLK-PNVBA-L1 by Festo.