RXP30 - Vacuum Cleaner Tower - Free user manual and instructions
Find the device manual for free RXP30 Tower in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bagless Cylinder Vacuum Cleaner |
| Brand | Tower |
| Model | RXP30 |
| Dimensions (L x W x H) | 400 mm x 280 mm x 320 mm |
| Weight | 5.2 kg |
| Power Supply | 220-240 V, 50/60 Hz |
| Power Consumption | 1200 W |
| Suction Power | 250 Air Watts |
| Dust Capacity | 1.5 L |
| Filtration System | HEPA 13 Filter |
| Noise Level | 78 dB(A) |
| Cord Length | 5 m |
| Cleaning Radius | 8 m |
| Main Functions | Dry vacuum cleaning for carpets and hard floors |
| Accessories Included | Crevice tool, dusting brush, upholstery nozzle |
| Maintenance | Empty dust container after each use; wash HEPA filter every 3 months; replace filter every 6-12 months |
| Safety Features | Thermal overload protection; automatic shut-off when overheated |
| Spare Parts Availability | Filters, dust container, brush roll available from Tower |
| Repairability | Modular design; replaceable parts; service manual available |
| Warranty | 2 years limited warranty |
Frequently Asked Questions - RXP30 Tower
How do I empty the dust container?
Press the release button on the top of the container and lift it off. Hold over a trash bin, press the bottom release to open the flap, and empty the contents. Reattach by snapping back into place.
How often should I clean the filter?
Clean the HEPA filter every 3 months by rinsing with cold water and letting it dry completely for 24 hours before reinserting. Replace the filter every 6-12 months for optimal performance.
Why is my vacuum losing suction power?
Common causes: full dust container (empty it), clogged filter (clean or replace), blocked hose or nozzle (check for obstructions). Ensure all attachments are securely fitted.
Can I use the vacuum on hardwood floors?
Yes, the RXP30 has a floor nozzle suitable for hard floors. You can also switch to the included brush accessory for gentle dusting. Always check for any debris that might scratch the surface.
How do I replace the HEPA filter?
Turn off and unplug the vacuum. Remove the dust container, then open the filter cover. Take out the old filter, insert a new one (model RXP30-FLT), close the cover, and reattach the container.
What should I do if the vacuum overheats and shuts off?
Switch off and unplug the vacuum. Check for blockages in the hose, attachments, and dust container. Clean the filter if necessary. Allow the motor to cool for at least 30 minutes before restarting.
Is the vacuum bagless? How does it work?
Yes, it is bagless. Dirt is collected in a transparent cyclonic dust container that separates debris from air. Simply empty the container when full – no bags needed.
Can I use the vacuum to pick up liquids?
No, the RXP30 is designed for dry vacuuming only. Using it to pick up liquids can damage the motor and void the warranty. For spills, use a wet/dry vacuum.
Where can I purchase replacement parts?
Replacement filters, brush rolls, and nozzles are available from the Tower official website or authorized retailers. Use the part number RXP30-ACC for accessories or RXP30-FLT for filters.
How do I store the vacuum?
Store the vacuum in a dry, cool place. Wrap the cord around the designated hooks on the back. Keep attachments in a drawer or clip them onto the vacuum body. Avoid placing heavy items on top.
User questions about RXP30 Tower
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Vacuum Cleaner in PDF format for free! Find your manual RXP30 - Tower and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RXP30 by Tower.
USER MANUAL RXP30 Tower
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Tower
Model : RXP30
Category : Vacuum Cleaner