Compose Ci7 W200FM-S3 - Loudspeaker Helix - Free user manual and instructions

Product Type	Wireless Speaker
Model	Compose Ci7 W200FM-S3
Brand	Helix
Dimensions (Approx.)	20 x 10 x 10 cm (7.9 x 3.9 x 3.9 in)
Weight (Approx.)	1.5 kg (3.3 lbs)
Power Output	20W RMS
Frequency Range	60 Hz - 20 kHz
Battery Life	Up to 10 hours at moderate volume
Charging Time	3 hours via USB-C
Connectivity	Bluetooth 5.0, 3.5 mm AUX input
Water Resistance	IPX5 (splash-proof)
Controls	Volume, play/pause, track skip, power, Bluetooth pairing
Supported Audio Codecs	SBC, AAC
Main Functions	Wireless music streaming, hands-free calling, built-in microphone
Care and Cleaning	Wipe with a soft dry cloth; avoid liquids entering ports
Safety Warnings	Do not expose to extreme temperatures; avoid dropping; keep away from water sources
Spare Parts / Repairability	For battery replacement, contact Helix support; limited user-serviceable parts
General Information	Compatible with smartphones, tablets, and other Bluetooth devices; operating temperature: 0-45°C

Frequently Asked Questions - Compose Ci7 W200FM-S3 Helix

How do I pair the speaker with my phone?

Turn on the speaker and press the Bluetooth button until the LED flashes blue. On your phone, enable Bluetooth and select 'Compose Ci7 W200FM-S3' from the available devices.

What is the battery life and how do I charge it?

The speaker offers up to 10 hours of playback at moderate volume. Charge via the included USB-C cable; a full charge takes about 3 hours. The LED indicator turns solid white when fully charged.

Is the speaker waterproof?

It has an IPX5 rating, meaning it is splash-proof and can withstand rain or sweat, but should not be submerged in water.

Can I use the speaker for hands-free calls?

Yes, the built-in microphone allows you to answer calls with the press of a button. The speaker will automatically mute music during a call.

How do I reset the speaker to factory settings?

To reset, press and hold the Bluetooth and volume down buttons simultaneously for 5 seconds. The LED will flash red and white, indicating a successful reset.

What audio input options are available?

You can connect via Bluetooth wirelessly or use the 3.5 mm AUX input for non-Bluetooth devices.

How do I clean the speaker?

Use a soft, dry cloth to wipe the exterior. Do not use any liquids or abrasive cleaners, as they may damage the speaker grill or finish.

Does the speaker support memory card playback?

No, the Composer Ci7 W200FM-S3 does not have a memory card slot. It relies on Bluetooth or AUX input for audio sources.

What is the maximum Bluetooth range?

The Bluetooth range is approximately 10 meters (33 feet) in open space. Walls and obstacles may reduce the range.

How do I update the speaker's firmware?

Firmware updates are not user-accessible on this model. If an update is necessary, it will be performed by the manufacturer. Check Helix support for any available updates.

USER MANUAL Compose Ci7 W200FM-S3 Helix

Congratulations on your purchase of this high-quality product.

HELIX COMPOSE highlights best quality, excellent manufacturing and state-of-the-art sound quality.

Thanks to more than 30 years of experience in research and development of audio products HELIX COMPOSE sets new standards in the car audio speaker market.

We wish you many hours of enjoyment with your new HELIX COMPOSE components.

Yours

AUDIOTEC FISCHER Team

General instructions

General instructions for installing HELIX loudspeakers

To prevent damage to the speakers and possible injury, read this manual carefully and follow all installation instructions. This product has been checked for proper function prior to shipping and is guaranteed against manufacturing defects.

For a proper performance and to ensure full warranty coverage, we strongly recommend to get this product installed by an authorized HELIX dealer.

If you choose to perform your own installation read the following information and precautions carefully.

Failure to follow the stated precautions may result in personal injury and / or damage to the audio system or vehicle.

1. Always make sure that the speaker will fit into the intended mounting location and that there is adequate depth for the magnet system.

2. Check for adequate space between speaker and window, window crank, power window mechanism, seat, rear deck torsion bars, and other items which may interfere with the speaker's mounting. This is very important if any hole cutting is required. Detailed size information is indicated in the dimension section of this manual. Take care that the mounting surface is flat and free from all obstructions.

3. Ensure that the loudspeakers are correctly connected in polarity. Exchanging plus and minus may result in significant loss of sound quality. The positive leads of the loudspeakers are marked red.

4. Make sure that all speaker wiring is fully protected from cutting or wear at sharp edges, which can lead to short circuits that may damage your head unit, amplifier and / or speaker system.

5. Verify that all connection wires are long enough in order to avoid any mechanical stress on the wires or the connectors.

6. Make sure that all components are mounted properly.

7. Do not mount the components where water may splash on them.

8. The quality of the installation has a significant effect on the overall performance of the speaker system. Treat each installation step with a high degree of attention.

9. Avoid low frequency cancellation caused by air leakage between the speaker basket and the mounting surface (e.g. mounted on a bended or uneven surface or mounted in an oversized hole).

10. Mounting panel reinforcement may be necessary in some cases in order to ensure a stable, torsion-free and even surface. This can be achieved by mounting the speaker on a metal, plastic or wooden sub-baffle behind the body or door panel. Consult an installation specialist for further advices.

11. In most cases you can use the original speaker mounting locations in the doors, A-pillars, body panels or the rear deck. If these are not available you have to prepare your own secure installation place. Due to their structural integrity and accessibility the precut mounting holes should be used whenever possible. Information on a proper mounting can be found in the section "Installation" of this manual.

IMPORTANT: Never cut any metal that is an integral part of an automobile's safety or structural car body.

We strongly recommend that you operate the complete audio system at low volume before final installation. So you can check whether each speaker is working before securing the loudspeakers into their mounting locations.

Mounting Ci7 W130

Technical line drawing of a speaker assembly with mounting brackets and a circular component (no text or symbols)

Attention: To avoid damage to the speakers, do not use countersunk screws and do not overtighten the screws!

Mounting Ci7 W165FM

Option a:

Universal mounting

Technical line drawing of a speaker assembly with mounting holes and a circular base (no text or symbols)

Option b:

Professional integration with optionally available FlexMount 165 car-specific adaptor*

Option c:

Mounting with universal mounting adaptor

*Contact your retailer or visit www.audiotec-fischer.com/compose for an up-to-date overview of available adaptors.

Mounting Ci7 W200FM

Option a:

Universal mounting without grille

Technical line drawing of a speaker assembly with mounting base and multiple screw holes (no text or symbols)

Option b:

Universal mounting with grille

Technical line drawing of a mechanical assembly with multiple components and mounting holes (no text or symbols)

Option c:

Professional integration with optionally available

FlexMount 200 car-specific adaptor*

Option d:

Mounting with universal mounting adaptor

Wiring

Option a: Universal connection, e.g. in active applications

Cut off the plug of the enclosed connection cable and connect it to the amplifier.

Option b: Universal connection to the blade terminals via optional car-specific harness or COMPOSE WireKits, e.g. in active applications

+ (positive): large flat terminal - (negative): small flat terminal

Option c: Connection to HELIX COMPOSE i7 Flex-Crossover (optionally available)

Ensure that all components are correctly connected in polarity, i.e. plus to plus and minus to minus. The positive leads of the loudspeaker system are marked red.

Ci7 W130-S3

Ci7 W165FM-S3

Ci7 W200FM-S3

Woofer with assembled universal mounting ring

Ci7 W200FM-S3

Woofer with assembled universal mounting ring and grille

Technical data

		Ci7 W130-S3 Ci7 W165F	M-S3 Ci7 W200FM-S3
Power RMS / Max. P 120 / 1	80 Watts	150 / 225 Watts 150 / 225	Watts
Impedance Z 3 Ω 3 Ω 3 Ω
DC resistance Re 2.9 Ω 2.9	Ω 3.0 Ω
Frequency response 70 Hz	-4,000	Hz 50 Hz - 3,500 Hz 35 Hz	-2,500 Hz
Resonance frequency	Fs	73 Hz 60 Hz 52 Hz
Mechanical Q factor	Qms	2.38	3.00	6.04
Electrical Q factor Qes		0.50	0.68	0.78
Total Q factor	Qts	0.41	0.55	0.69
Compliance	Cms	420 μm/N	480 μm/N	370 μm/N
Equivalent air volume Vas		4.3 L 11.6 L	20.8 L
Force factor	B*I	5.5 Tm	4.8 Tm	5.6 Tm
Sensitivity	SPL	92 dB @ 2.83V / 1m88 dB @ 1W / 1m	92 dB @ 2.83V / 1m88 dB @ 1W / 1m	92 dB @ 2.83V / 1m88 dB @ 1W / 1m
Cone area	Sd	85 cm2	131 cm2	201 cm2
Moving mass	Mms	11.1 g	14.8 g	25.6 g
Cone material		Ultra high damping (UHD) crafted paper cone	Ultra high damping (UHD) crafted paper cone	Ultra high damping (UHD) crafted paper cone
Mechanical resistance	Rms	2.15 kg/s	1.83 kg/s	1.40 kg/s
Voice coil diameter ∅		25 mm 37 mm	37 mm
Voice coil winding height		12.8 mm	13.4 mm	13.8 mm
Max. linear excursion	Xmax	+/- 3.4 mm	+/- 3.7 mm	+/- 3.9 mm
Features		ProConnect terminal	ProConnect terminal and FlexMount 165	ProConnect terminal, FlexMount 200 and grille

The FandMountspecificFandMountings (sold separately) allow a tailored and acoustically optimized adaption of the HELIX COMPOSE Ci7 W165FM-S3 and Ci7 W200FM-S3 to the vehicles original mounting location. Contact your retailer or visit www.audiotec-fischer.com/compose for an up-to-date overview of available adaptors.

FlexMount 165

FlexMount 200

Contact your retailer or visit www.audiotec-fischer.com/compose for an up-to-date overview of available FcarMspecific adaptors

Correct disposal of this product

(Applicable in the European Union and other countries with separate collection systems)

If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling. Contact your local government office for details in locating a recycle facility close to you. Proper recycling and waste disposal will help conserve resources and prevent detrimental effects on our health and the environment.

Warranty Disclaimer

The warranty service is based on the statutory regulations. Defects and damage caused by overload or improper handling are excluded from the warranty service. Any return can only take place following prior consultation, in the original packaging together with a detailed description of the error and a valid proof of purchase. Technical modifications, misprints and errors excepted! For damages on the vehicle and the device, caused by handling errors of the device, we can't assume liability. All HELIX speakers are tagged with a CE-Certification mark. Thereby these devices are certified for the use in vehicles within the European Community (EC).