Sagita Evo - Amplifier Fezz - Free user manual and instructions
Find the device manual for free Sagita Evo Fezz in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Integrated Amplifier |
| Brand | Fezz |
| Model | Sagita Evo |
| Amplifier Class | Class A/B |
| Output Power | 30W per channel into 8 ohms |
| Frequency Response | 20 Hz - 20 kHz (+/- 0.5 dB) |
| Total Harmonic Distortion | < 0.1% |
| Input Sensitivity | 200 mV |
| Input Impedance | 47 kOhms |
| Inputs | 4x RCA, 1x Phono (MM) |
| Outputs | Speaker terminals (bi-wire capable), 1x Pre-out |
| Headphone Output | 6.3 mm jack |
| Tubes | 2x 12AX7, 2x EL34 (or similar) |
| Dimensions (W x D x H) | 430 x 350 x 120 mm |
| Weight | 12 kg |
| Power Supply | 230V/115V switchable, 50-60 Hz |
| Power Consumption | 200W maximum |
| Remote Control | Included |
| Finish | Black or Silver aluminum front panel |
| Accessories | Power cord, user manual, remote control |
| Cleaning | Wipe with a dry, soft cloth. Avoid solvents. |
| Safety | Do not expose to moisture. Ensure proper ventilation. |
| Repairability | Tube replacement and general servicing by qualified technician. |
Frequently Asked Questions - Sagita Evo Fezz
How do I connect my speakers to the Sagita Evo?
Use high-quality speaker cables. Connect the positive terminal of the amplifier to the positive terminal of the speaker, and similarly for negative. The Sagita Evo supports bi-wiring with two pairs of terminals.
What is the recommended warm-up time?
Allow at least 15 minutes for the tubes to reach optimal operating temperature. The sound will improve as the amplifier stabilizes.
Can I use headphones with this amplifier?
Yes, the Sagita Evo has a 6.3 mm headphone jack on the front panel. Inserting headphones mutes the speaker outputs.
How do I replace the tubes?
Turn off the amplifier and unplug it. Wait 10 minutes for tubes to cool. Remove the tube cage, gently pull out the old tubes, and insert new ones ensuring proper alignment. Bias adjustment may be required; consult a technician.
What is the phono input for?
The phono input is designed for turntables with a moving magnet (MM) cartridge. It provides the necessary RIAA equalization and gain.
Can I use the pre-out to connect a subwoofer?
Yes, the pre-out outputs a line-level signal that can be connected to a powered subwoofer or an external power amplifier.
How do I clean the amplifier?
Unplug the unit. Use a soft, dry microfiber cloth to gently wipe the exterior. Do not use any liquids or abrasive cleaners. For the tube cage, use a brush to remove dust.
What should I do if the amplifier doesn't power on?
Check the power cord connection and ensure the power switch is on. Verify that the fuse is intact. If the issue persists, contact a qualified service technician.
Is it safe to leave the amplifier on all the time?
While tube amplifiers are designed for continuous operation, it is recommended to turn it off when not in use to conserve tube life and energy. Always allow proper ventilation.
What is the warranty period?
Fezz typically offers a 2-year warranty from the date of purchase. Keep your receipt as proof of purchase. Warranty covers manufacturing defects but not tube wear.
User questions about Sagita Evo Fezz
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Amplifier in PDF format for free! Find your manual Sagita Evo - Fezz and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Sagita Evo by Fezz.