Silver Luna Prestige - Receiver Fezz - Free user manual and instructions
Find the device manual for free Silver Luna Prestige Fezz in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stereo Receiver |
| Brand | Fezz |
| Model | Silver Luna Prestige |
| Inputs | 4x RCA, 1x Phono, 1x Aux, 1x Optical, 1x Coaxial |
| Outputs | Speaker terminals (L/R), 1x Pre-out, 1x Headphone |
| Power Output | 2 x 100W RMS (8 ohms) |
| Frequency Response | 20Hz - 20kHz ±0.5dB |
| Total Harmonic Distortion | < 0.05% |
| Signal-to-Noise Ratio | > 90dB |
| Dimensions (W x H x D) | 430 x 120 x 350 mm |
| Weight | 8.5 kg |
| Power Supply | 230V AC, 50Hz |
| Power Consumption | 250W (max), 0.5W (standby) |
| Main Functions | Amplification, source switching, volume control, tone control, phono stage, remote control |
| Maintenance & Cleaning | Use a soft dry cloth; avoid liquids; ensure ventilation slots are free of dust |
| Safety Features | Overload protection, short circuit protection, thermal shutdown |
| Spare Parts & Repairability | Replaceable fuses; service by qualified technician; available from authorized centers |
| General Information | Designed for high-fidelity audio reproduction; compatible with passive speakers; includes remote control |
Frequently Asked Questions - Silver Luna Prestige Fezz
How do I connect my speakers to the Silver Luna Prestige?
Use speaker cables with bare wires or banana plugs. Connect to the left and right speaker terminals on the back panel, ensuring correct polarity (positive to red, negative to black).
Can I use the receiver with a turntable?
Yes, the Silver Luna Prestige includes a dedicated phono input for moving magnet (MM) cartridges. Connect your turntable's RCA cables to the Phono input and ensure the ground wire is connected.
What is the maximum power output?
The receiver delivers 2 x 100W RMS into 8 ohms, providing ample power for most bookshelf and floorstanding speakers.
How do I reset the receiver to factory settings?
Press and hold the Power button for 5 seconds while the unit is off. The display will flash indicating a reset. Release the button. This will clear all settings.
Why is there no sound coming from the speakers?
Check that the correct input source is selected, speakers are properly connected, volume is turned up, and the receiver is not in mute mode. Also verify that the speakers are functional.
Can I use the receiver with a subwoofer?
Yes, use the Pre-out output on the back to connect to a powered subwoofer. You may need a subwoofer cable (RCA).
How do I clean the receiver?
Unplug the unit. Use a soft, dry microfiber cloth to wipe the exterior. Do not use any liquids or abrasive cleaners. Ensure ventilation slots are free of dust for proper cooling.
What is the standby power consumption?
The standby power consumption is very low, typically 0.5W, making it energy efficient when not in use.
Does the receiver support Bluetooth or wireless streaming?
The Silver Luna Prestige is a traditional stereo receiver without built-in Bluetooth. You can add a Bluetooth adapter via the Aux input for wireless streaming.
What should I do if the receiver overheats?
Ensure adequate ventilation around the unit. Do not block the ventilation slots. If it shuts down due to thermal protection, allow it to cool for 30 minutes before restarting. Reduce volume or improve airflow.
User questions about Silver Luna Prestige Fezz
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual Silver Luna Prestige - Fezz and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Silver Luna Prestige by Fezz.