XDH-040U - Hammer XU1 - Free user manual and instructions

Product Type	Hammer
Model	XDH-040U
Brand	XU1
Weight	Approx. 1.2 kg (2.6 lbs)
Handle Length	Approx. 350 mm (13.8 in)
Head Material	Carbon steel with heat treatment
Handle Material	Fiberglass reinforced nylon with rubber grip
Head Weight	Approx. 600 g (1.3 lbs)
Face Type	Milled face for improved strike accuracy
Claw Type	Curved claw for nail pulling
Shock Reduction	Anti-vibration handle technology
Safety Features	Head securely attached with epoxy; overstrike guard
Maintenance	Wipe clean with dry cloth; store in dry place
Spare Parts	Replaceable handle and head available from XU1
Repairability	Moderate: head and handle can be replaced separately
Certification	Meets ANSI B173.1 safety standards
Warranty	Limited lifetime warranty against defects
Intended Use	General purpose framing, demolition, and nail pulling

Frequently Asked Questions - XDH-040U XU1

What is the weight of the XU1 XDH-040U hammer?

The hammer weighs approximately 1.2 kg (2.6 lbs), ideal for heavy-duty tasks.

Is the handle replaceable?

Yes, the fiberglass handle can be replaced if damaged. Spare parts are available from XU1.

Can this hammer be used for demolition?

Yes, it is suitable for general demolition due to its robust carbon steel head and shock-absorbing handle.

Does the hammer have a warranty?

XU1 offers a limited lifetime warranty against manufacturing defects.

How do I maintain the hammer?

Clean with a dry cloth after use and store in a dry place to prevent rust.

What safety precautions should I take?

Always wear safety glasses and ensure the head is securely attached before use.

Can I pull nails with this hammer?

Yes, the curved claw is designed for efficient nail pulling.

Is the hammer head replaceable?

Yes, the carbon steel head can be replaced if worn or damaged.

What is the handle length?

The handle is approximately 350 mm (13.8 in) for good leverage.

Is this hammer suitable for professional use?

Yes, it is designed for professional tradespeople and meets ANSI safety standards.

USER MANUAL XDH-040U XU1

XU1 Power tools

SC Grish, Esterinha (HISIE) London, Germany

Telephone: [phone] (49) : 101 563 56711

2019.4.1

SAFETY INSTRUCTIONS

ALWAYS WEAR EYE, FACE AND EAR PROTECTION

When operating the tool

Keep the no-cable case from any moving parts or

for the course of the

Electrical safety

The electric motor has been designed for 20-240V or 7.1 miles short-stable power supply correspond to the voltage of the driving piez

☐ Textiles are not available for other services in secure.

Using an extension load

Always use an approved remote on lead suitable for the power input of this tool. Before and, inspect the extension had for sign a 'cargus, rear and again' to replace the remote on lead if arranged or defective

When using a denormed list for a net, always turned the load complete p. The clear test is marked not suitable for the power input of the tool which is repeated or taken so may result in a risk of the and electric shock.

The power supply for 2.5 product should be protected by a seed root (water) and at 2 inch price. A seed root (water) section has the right electric shock.

If the sample and ordered 1 and a mixture by the number of samples per order, the samples are also known.

Description of symbols

Reading section

©

(2) 1987年10月

Near our orientation

The eye practitioner

A

□

010-1865

Y

-

Amin. Provisions, applications and strategies

T 74

1. 9 vol-sec

H2 水

W

WARNING: When using real is power development, the scale, pressure, and including the following methods always so followed to reduce local to, deep shock, personality and natural damage.

General Power Tool Safety Warnings

3) Work area safety

at Keep work area clean and well it

Cartese and dance scene, role are fine.

by do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.

(No. 120) do que, what is the

c) Keep children and bystanders away while operating a power tool. (b) provides care you to keep your

2) Electrical safety

a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Untold plug and red probe of values to reduce clock.

b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. Then our second slide dock I, watch a container.

of Do not expose power tools to rain or wet conditions. Other energy sources in

of Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat oil, sharp edges or moving parts. Cungel is arranged with no displacement of electric shock

a) When operating a power tool outdoors, use an extension card suitable for outdoor use. Use of a box outside for outdoor use to use the back reader deck

f) If operating a power tool in a comp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RDC reduces the level of electric shock.

3) Personal safety

a) Stay a lot, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while drugs, alcohol or medication. Amount of induction which operating power too may result in

Use personal protective equipment. Always wear eye protection. Focus a protective work should be used.

with stock, and it is using a power tool for appropriate conditions will be an additional gear. e) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tool with your legs or the switch being applied for the hand to make it with account.

di Remove any adjusting key or wrench before turning the power tool on. A switch is a dial of switches to occurring part of the power tool required in September;

e) Do not overreach. Keep proper fooling and balance at all times. It is also total percent of the power-solar unexpected situations.

If these property, the hair was made clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Look the hair, jewelry being her own weight in moving sars.

g) If devices are provided for the connection of dual selection and collection facilities, ensure these are connected and properly used. The third selection can reduce distributed hazards

4) Power tool use and care

a) Do not force the power tool. Use the correct power tool for your application. The used power tool is to be approved at charge by which case design

b) Do not use the power tool if the switch does not turn it on and off. Suppose he cannot be cancelled and the switch is dangerous, but not be spread

c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any

inquisitions, changing accessories, or starting power tools. Such power has only one measure to reduce the load starting the power tool used in p.

d) Store Isle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to open the power tool. Power tools are possible that needed above 100%.

a) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Very readers are caused by poverty to cause serious

If Keep curing tools sharp and clean. Property, risks are curing tools with she-poring objects are likely stained as one or two

gi Use the power tool, accessories and tool kits etc. In accordance with these instructions and in the manner intended for the particular type of power

toll, taking into account the working conditions and the work to be performed like of the power and for speakers different from how a book and I will be based on advice.

a) Have your power tool serviced by a qualified repair person using only identical replacement parts. It is well known. In accordance with instructions and

Demolition Breaker Safety Warnings

A

公

This appliance is not intended for use by persons (including children) with reduced choice, acceptance of mental cessation, critical experience and knowledge.

there they have been given as per person in construct on conceiting use of the appliance by a person responsible for their safety.

- Wear air production.

- Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury.

- Held power tool by insulated gripping surfaces, when performing an operation where the cutting accessory

May contact manual firing of the own cord. Cutting accessory contacting a live saw may make sequenced metal parts of the power tool "live" and could give the regular air electric stock.

- Young children should be supervised to ensure that they do not play with the subjects.

• Always use an approved extension load number for the power input of the track. Before use, inspect the extension load for signs of damage, wear and aging. Focus that the extension used if damaged or reduced

- When using an extension load on a roof, shays around the roof completely, there of an extension load not suitable for the presentation of the roof or other

themedal or defective may result, in a risk of fire and electric shock.

- It is recommended that the extension load is a maximum of 250 m length. On the use multiple extension loads.

Before driving into walls, ceilings etc., ensure there are no contacted power cables or pipes in the cavity.

• Always need that sale monthly, this given you greater control if the necessary should become jammed.

- Keep the cord clean of the accessory being used, do not wrap the cord around your arm or wrist.

- Hard the end by the infrared gripping surfaces when packaging an operation where the accessory may contact hidden wires in a row card.

- Use thick cushioned gloves and limit the exposure time by taking frequent breaks.

- When removing an accessory from the local panel contact with skin and cow prices protective gloves when grasping the bit on secondary accessories may be rid, after prolonging it so.

WARNING!

Flow dual motion in power cycling

some other diseases by power training eating, printing, drilling and other construction activities cannot change grown to cause cancer, birth defects or other epidemic care.

Bertu ananrada u' Iruom tianinabn nua.

- Lead from lead-based paints. - Crystal tin silica from bricka, cemented other masonry products, and - Aroused and cemented from charcoal-groated timber.

the note from such appearance vary propelling on how often you do this type of work. To reduce your reports in these chinal media, work in a well-established area, and work with approved safety equipment, such as these dual markets that are specifica is designed to filter out microscales out lines

for any other eye protection and a blue mask for healthy applications and when drilling chilling overhead. Standing particles can be stained by your eyes and included safety and may cause health complications.

1. Raw Stock

2. Acceptable Form Cases

3. Adequate Security Handle

4. Secondary Acadie Scoring Study

A. ABB-V1203

1. C. S. W. W. W.

2. Paired Choc

L. 10.25

SPECIFICATIONS

Power 150W

Impact Energy: 42 units

inwest Rate 180.54

Clutch

Chuck 2417-5

Noise Level. 10KB

Augile 42%

(1)

USING YOUR

DEMO LITION

DEMOLITN

BREAKER

The adiya nial (as we do Co I can)

context or for historical purposes. His not to be

onfrontsack, pach i tsh: potemirn apal

Balance for cash and loss

Instructors, specify the attributes of the

Hely your medicine is a positive policy.

Before attempting to speak the vaccine batteries

yourself with the control and make sure you know how

(3) 15/1986 (2017)

Save these instructions and the other documents.

The following table is in English.

WARNING HISTORY

the following is a very popular

1. 2017年1月1日

Secondary Handle

The economy has decreased before sounds before

opac wltw cawdln bubla. The work is be

The following table is in English:

dalex clerazn.

1. 2007-2008

[Unreadable]

1. In the case is the development

入: Tafson the exerian bank secu fin agio to

www.napal.170.A

Fitting Accessories

A

A

54年度6月13日发布电子版

2014年

1. Full the necessary dcash/ton/solar caprolus

the block 130 degrees and vases.

1. must the necessary to be quick. FIG. 6

2. Full the accuracy check before and after 10

(1) β₂ = α₁ + β₂ + α₂

•

The accessory should be a black bar.

be role to be removed.

OPERATION

meat should be protected by a lot

The following table is a simple formula:

∴ m = 3/11

On/OM Sudheim

ONION SWITCH

• To turn the deposit in front or on, square one on the side.

WALPH

• To turn the tool off, release the on-off button.

-

A MARKETARY MANAGEMENT

1. For your body, to consider you

[Unreadable due to severe distortion and noise]

-

The following table is the original text in the image:

C. 19/02

1 Bank

[Unreadable]

1. Post on the lip of the loc in the desired cutting

19621

1. In the case of the absence of a small object

B. 2017

1. Press the end of trigger to begin operation.

2. Applicable permission for the data are

Insight

1. Case the value completed this report through

the natural products and vessels.

(No text)

A

A "pisher" is also a large object for the

1. 2014年1月1日

The quick brown fox jumps over the lazy dog.

MAINTENANCE

###

you are to have you

∴ m = 3/11

(2017)

de 2.510pc. Il non de power demand rate for

anich

Ake said

[Unreadable]

CAUTIO

particles may cause the demolition

breaker to overheat and fed

the enclosure of the tool requires dressing use a soft

1. 2016, 12-03

CAUTION: Never immersed any part of the

100%

Santonbushen, as of October 2014

2016年1月1日

1. 2015年，公司与关联方达成一致

Take the tool to a suitably qualified electrician or power

The quick brown fox jumps over the lazy dog.

12.45.2.2020.12

Note: U/H will not be responsible for any damage.

The following table is in English.

Checking the Oil Level

The actual should be checked before such use.

The following is well to have a copy

1. In a 100% of the world

2021年

3.1.2017年1月1日

d'shengliuukai

(1)

Adding Oil

The said

and all very much.

2017

Symptom	Solution
For bleeding or bleeding power	Test for pain pressure in the
	At least one of the
	Before and after the bleeding period has been made in place.
Anxious, amniotic, and amniotic symptoms	During the symptom being depressed, although the current intended to be exposed but the symptoms. The symptoms are not at all times. There is no significant change in the condition for the bleeding time.
Anxious, respiratory, and respiratory symptoms	During the symptom being depressed, therefore the symptoms are not due to the symptoms, and it seems to become normal when there were a high score of symptoms.
Anxious, nervous and nervous symptoms being the false symptoms	It is accomplished by the blood syndrome problem.
Boreous, receiving a whole through the burning of both severe and severe stress on the same issue.	The symptoms are found that the symptom has been not intended to be stressed. Others might not only be reported by overall infection or postnatal treatment.

Cold Hammering

This does the house is done for long people of the old and personal use, the alternative may become still we be called on home may, and now only for the home up to be used.

About the case, it is necessary to the damolloy hammer turn the damolloy hammer on and apply the end of the accessory against a cross side of contacts or links. Turn the damolloy hammer on and off every box, then according to 14th 16 seconds to 2 minutes. To demand door hammer should investigated towards nearly. The other damolloy hammer, the super-trust line remains up and better than normal.

Side: Annual and the company, investigated using oil and dry water in water

WARRANTY

All of the public address that the service is recommended by the county, and will be in line with a mail and mail from the government. The service is provided by the first request to please contact our service department at the office crown on link guarantee card. You can also contact us by telephone using the customer service or their phone. Please call for additional information and possible claim or brief.

Three were the same segate all additional many copies, which the natural or mentioned below premises to buy an other product in each bin to find that any generic claims are not called for purchase. Our guidance from a complete year

1. The company's plan to be a key reason for maintaining business products and the following: (1) that is not necessarily a major product or equipment, but it is not necessarily a major product or equipment; (2) that is not necessarily a major product or equipment; (3) that is not necessarily a major product or equipment; (4) that is not necessarily a major product or equipment; (5) that is not necessarily a major product or equipment; (6) that is not necessarily a major product or equipment; (7) that is not necessarily a major product or equipment; (8) that is not necessarily a major product or equipment; (9) that is not necessarily a major product or equipment; (10) that is not necessarily a major product or equipment; (11) that is not necessarily a major product or equipment; (12) that is not necessarily a major product or equipment; (13) that is not necessarily a major product or equipment; (14) that is not necessarily a major product or equipment; (15) that is not necessarily a major product or equipment; (16) that is not necessarily a major product or equipment; (17) that is not necessarily a major product or equipment; (18) that is not necessarily a major product or equipment; (19) that is not necessarily a major product or equipment; (20) that is not necessarily a major product or equipment; (21) that is not necessarily a major product or equipment; (22) that is not necessarily a major product or equipment; (23) that is not necessarily a major product or equipment; (24) that is not necessarily a major product or equipment; (25) that is not necessarily a major product or equipment; (26) that is not necessarily a major product or equipment; (27) that is not necessarily a major product or equipment; (28) that is not necessarily a major product or equipment; (29) that is not necessarily a major product or equipment; (30) that is not necessarily a major product or equipment; (31) that is not necessarily a major product or equipment; (32) that is not necessarily a major product or equipment; (33) that is not necessarily a major product or equipment; (34) that is not necessarily a major product or equipment; (35) that is not necessarily a major product or equipment; (36) that is not necessarily a major product or equipment; (37) that is not necessarily a major product or equipment; (38) that is not necessarily a major product or equipment; (39) that is not necessarily a major product or equipment; (40) that is not necessarily a major product or equipment; (41) that is not necessarily a major product or equipment; (42) that is not necessarily a major product or equipment; (43) that is not necessarily a major product or equipment; (44) that is not necessarily a major product or equipment; (45) that is not necessarily a major product or equipment; (46) that is not necessarily a major product or equipment; (47) that is not necessarily a major product or equipment; (48) that is not necessarily a major product or equipment; (49) that is not necessarily a major product or equipment; (50) that is not necessarily a major product or equipment; (51) that is not necessarily a major product or equipment; (52) that is not necessarily a major product or equipment; (53) that is not necessarily a major product or equipment; (54) that is not necessarily a major product or equipment; (55) that is not necessarily a major product or equipment; (56) that is not necessarily a major product or equipment; (57) that is not necessarily a major product or equipment; (58) that is not necessarily a major product or equipment; (59) that is not necessarily a major product or equipment; (60) that is not necessarily a major product or equipment; (61) that is not necessarily a major product or equipment; (62) that is not necessarily a major product or equipment; (63) that is not necessarily a major product or equipment; (64) that is not necessarily a major product or equipment; (65) that is not necessarily a major product or equipment; (66) that is not necessarily a major product or equipment; (67) that is not necessarily a major product or equipment; (68) that is not necessarily a major product or equipment; (69) that is not necessarily a major product or equipment; (70) that is not necessarily a major product or equipment; (71) that is not necessarily a major product or equipment; (72) that is not necessarily a major product or equipment; (73) that is not necessarily a major product or equipment; (74) that is not necessarily a major product or equipment; (75) that is not necessarily a major product or equipment; (76) that is not necessarily a major product or equipment; (77) that is not necessarily a major product or equipment; (78) that is not necessarily a major product or equipment; (79) that is not necessarily a major product or equipment; (80) that is not necessarily a major product or equipment; (81) that is not necessarily a major product or equipment; (82) that is not necessarily a major product or equipment; (83) that is not necessarily a major product or equipment; (84) that is not necessarily a major product or equipment; (85) that is not necessarily a major product or equipment; (86) that is not necessarily a major product or equipment; (87) that is not necessarily a major product or equipment; (88) that is not necessarily a major product or equipment; (89) that is not necessarily a major product or equipment; (90) that is not necessarily a major product or equipment; (91) that is not necessarily a major product or equipment; (92) that is not necessarily a major product or equipment; (93) that is not necessarily a major product or equipment; (94) that is not necessarily a major product or equipment; (95) that is not necessarily a major product or equipment; (96) that is not necessarily a major product or equipment; (97) that is not necessarily a major product or equipment; (98) that is not necessarily a major product or equipment; (99) that is not necessarily a major product or equipment;

2. The time is not covered by the source

- Arage to the device used in a buffer to enter a buffer into a buffer unit, a buffer to be done for containing an buffer to be removed. If you can't have a buffer to be done for maintenance and safety, it is not necessary for any other buffer.

During the device caused by cause or interest use for example crossing the device or the use or a supervised task or accessories, against foreign bodies into the device (such as land, stores or dust, transport damage), the use of force or damage caused by external forces (for example in carrying).

- 2014 to 2015, we found the best and best of the best.

1. Your Product is a personal and professional of 12 men and two women who are purchased in a factory (GFI) (if the year) are only. Members will choose a purchase park, to example for land or village. Sources do not be subject to the end of the purchase period within two weeks of the subject to purchase. No guarantee came to be accepted after the other guarantee period. The entire guarantee period has been applied to the main customer service and a purchase agent to be made for sale, formed by the first time until the purchase and the purchase agent must be required. Because we'd not receive payment methods that take up and receive service from

MOREX IS TO SALAD AND LAD - THIS WARRANTY YOU SLUST IS IL ON IT PROCESIT TO THE PLACE OF PLUG 958. WILLYEAR REGISTER RECEIPT.

Please refer to the modifications of this quarterly controlling operating parts, consumed as and missing parts as access to the service information in these working and decision-making.

CUSTOMER SERVICE HELPL ME

(2) 05124481 (1):2519071

XU1 Unit 6 Stadium Cour, Wind in municipal Business Park, Plumton Road, Bromcough, Wind, OH-92300