MBD-K102Q - Karaoke LG - Free user manual and instructions

Product Type	Karaoke System
Brand	LG
Model	MBD-K102Q
Dimensions (W x H x D)	420 x 295 x 275 mm
Weight	5.2 kg
Power Supply	AC 100-240V, 50/60Hz
Power Consumption	60W
Speaker Output	2 x 30W RMS
Frequency Response	20Hz - 20kHz
Audio Inputs	2 x 6.3mm microphone jacks, 1 x 3.5mm AUX input, USB port
Playback Media	CD, DVD, USB, Bluetooth
Bluetooth Version	4.2
Display	LED display
Controls	Touch panel, remote control
Microphone	2 wired microphones included
Equalizer	Preset sound modes
Karaoke Features	Key control, echo, vocal cancellation
Remote Control	Yes, included
Included Accessories	2 microphones, remote control, power cord, user manual

Frequently Asked Questions - MBD-K102Q LG

How do I connect my smartphone via Bluetooth?

Press the Bluetooth button on the remote or panel until 'BT' appears. Enable Bluetooth on your phone and select 'LG MBD-K102Q' from the list. Pairing is complete when the display shows 'Connected'.

How can I adjust the echo effect on vocals?

Use the Echo knob on the front panel or remote control. Turn it clockwise to increase echo, counterclockwise to decrease. The display shows the current level.

Can I play music from a USB flash drive?

Yes, insert a USB drive into the USB port. The system will automatically detect and play compatible audio files (MP3, WMA). Use the remote to navigate tracks.

How do I clean the karaoke system?

Unplug the unit and use a soft, dry cloth to wipe the exterior. For stubborn dirt, slightly dampen the cloth with water. Do not use harsh chemicals or abrasive materials. Keep the ventilation openings dust-free.

What should I do if there is no sound from the microphone?

Ensure the microphone is firmly connected to a 6.3mm jack. Check that the microphone volume is not set to minimum. Press the Mic On/Off button to enable it. If using a wireless mic, replace batteries.

How do I reset the system to factory settings?

Press and hold the Stop button on the front panel for 5 seconds while the unit is on. The display will show 'RESET' and the system will restart. All personalized settings will be erased.

Can I connect external speakers to this karaoke system?

Yes, use the Line Out or Speaker Out terminals on the back. For passive speakers, connect directly to the speaker terminals (4-8 ohms). For active speakers, use the audio output jacks.

How do I use the key control function to change the pitch?

Press the Key Control buttons (+/-) on the remote to raise or lower the pitch of the music. Each press changes the key by one semitone. The display shows the current key shift.

What types of discs are compatible?

The system supports CD, CD-R/RW, DVD, and DVD±R/RW discs. It can play audio CDs, MP3 CDs, and DVD karaoke discs. Do not use damaged or warped discs.

Can I use additional wireless microphones?

Yes, you can connect up to 2 wired microphones via the 6.3mm jacks. For wireless microphones, they must be connected via the AUX input using a 6.3mm to 3.5mm adapter. Note that only two microphone inputs are available.

USER MANUAL MBD-K102Q LG

Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely.

Internet address: http://ua.lge.com

Customer Information Center LG: (380-44) 490-7777,

8-800-303-0000

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING: Do not install this equipment in a confined space such as a book case or similar unit.

CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating.

The openings should be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction have been adhered to.

CAUTION:

This product employs a Laser System.

To ensure proper use of this product, please read this owner's manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service center.

Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.

CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a dedicated circuit;

That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.

Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible.

Disposal of your old appliance

1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.

Introduction

Maintenance and Service ....3

Before use ....4

Front Panel/Back Panel 5

Remote Control ....6

Installation and Setup

TV Connection 7

Selecting input source ....7

Antenna (Aerial) Connection .....8

PORTABLE Function 8

Headphone Jack ....8

Using Microphone ....8

To Adjust ECHO Volume .....

USB Function 9

Compatible Devices....9

Speaker System Connection....9

Setting the Clock ....10

Timer Function....10

Sleep Timer Function....10

Displaying Disc Information On-screen .....11

Initial Settings ....11

General features .....15

Additional features .....16

Playing an Audio CD or MP3/WMA file .....17

Programmed Playback ....17

Viewing a JPEG file .....18

Playing a DivX Movie file .....19

Presetting the Radio Stations .....20

Listening to the Radio .....20

RDS Operation - Optional ....21

Dimmer....22

Mute 22

Sound Mode 22

EQUALIZER Effect 22

DEMO 22

XDSS 22

MP3 Optimizer .....22

XTS Pro 22

VIRTUAL sound .....22

KARAOKE Operation .....23-27

REFERENCE

Language Codes ....28

Area Codes 28

Troubleshooting .....29-30

Specifications ....31

Maintenance and Service

Refer to the information in this chapter before contacting a service technician.

Handling the unit

When shipping the unit

Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory.

Keeping the exterior surfaces clean

- Do not use volatile liquids such as insecticide spray near the unit.

- Do not leave rubber or plastic products in contact with the unit for a long period of time, since they leave marks on the surface.

Cleaning the unit

To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution.

Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit.

Maintaining the Unit

The unit is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality could be diminished.

Depending on the operating environment, regular inspection and maintenance are recommended after every 1,000 hours of use.

For details, please contact your nearest authorized service center.

Introduction

Before use

To ensure proper use of this product, please read this owner's manual carefully and retain it for future reference.

This manual provides information on the operation and maintenance of your unit. Should the unit require service, contact an authorized service location.

About the Symbol Display

" may appear on your TV display during operation and indicates that the function explained in this owner's manual is not available on that specific DVD video disc.

Symbol Used in this Manual

Note:

Indicates special notes and operating features.

Tip:

Indicates tips and hints for making the task easier.

A section whose title has one of the following symbols is applicable only to the disc represented by the symbol.

Indicates hazards likely to cause harm to the unit itself or other material damage.

DVD

DVD and finalized DVD±R/RW

ACD

Audio CDs

MP3

MP3 files

WMA

WMA files

JPEG

JPEG files

DivX

DivX files

Manufactured under license from Dolby Laboratories.

"Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved.

Types of Playable Discs

DVDVIDEO	DVD(8 cm / 12 cm disc)
COMPACTDISC DIGITAL AUDIO	Audio CD(8 cm / 12 cm disc)

In addition, this unit can play DVD±R/RW, and CD-R or CD-RW that contain audio titles, MP3, WMA, JPEG, or DivX files.

Note:

• Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs may not be playable on this unit.
• Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc.
• Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). It may result in malfunctions.

Regional Code

This unit has a regional code printed on the bottom of the unit. This unit can play only DVD discs labeled with the same code as the rear of the unit or "ALL".

Note on Regional Codes

• Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number must match your DVD player's regional code or the disc cannot play.
• If you try to play a DVD with a different regional code from your player, the message "Check Regional Code" appears on the TV screen.

POWER SAVE MODE

You can set up the unit into an economic power save mode.

In power-on status, press and hold ⏻/I on the front panel (POWER on the remote control) for about 3 seconds.

- Nothing is displayed in the display window when the unit enters the power save mode.

To cancel power save mode, press ⏻/I on the front panel (POWER on the remote control).

Front Panel/ Back Panel

1. ⏻/I (POWER)
2. Display window
3. • VOLUME

• I◀◀/▶▶I (SKIP/SCAN) • TUN. (-/+) (TUNER) • ▶/II (PLAY/PAUSE) • ■ (STOP) • MO./ST. (MONO/STEREO)

1. • MIC VOLUME KNOB

• FUNC. (FUNCTION)

(FM, AM, DVD/CD, USB, PORTABLE, TV-AUDIO)

• CLOCK • TIMER - SET/ RDS (Optional)

1. PHONES

(Headphone jack: 3.5mm)

1. PORTABLE IN jack
2. MIC1/ MIC2 (MIC Jacks)
3. • OPEN/CLOSE • DEMO
4. DISC TRAY
5. USB connector
6. Power cord
7. OUTPUT (TO TV) EURO AV socket
8. VIDEO OUT SELECTOR switch
9. VIDEO OUT connector
10. COMPONENT VIDEO OUT (PROGRESSIVE SCAN) connector (Y PB PR)
11. Antenna terminal
12. Speaker terminal

Remote Control

Remote Control Operation Range

Point the remote control at the remote sensor and press the buttons.

• Distance: About 23 ft (7 m) from the front of the remote sensor - Angle: About 30° in each direction in front of the remote sensor

1. POWER button
2. FUNCTION SELECT buttons (TUNER/BAND, DVD/KARAOKE, AUX, USB)
3. NUMERIC buttons (0-9)
4. EQ master, XDSS plus, XTS Pro, VSM buttons
5. SETUP button
6. • ARROW buttons (▲ / ▼ / ◀ / ▶)

(Selects an option in the menu.)

• PRESET (-/+) buttons (▲ / ▼) • TUN. (-/+) buttons (◀ / ▶)
• SELECT/ ENTER button
• MENU button (Use the MENU button to display the menu screen included on DVD video discs.)
• PROG./MEMO. button
• REPEAT button
• REPEAT A-B button
• • STOP (■)/MO.ST. button

• PAUSE (II)/STEP button • PLAY (▶) button • SCAN (◀◀▶▶) button • TEMPO (-/+) button • SKIP (◀◀/▶▶) button • KEY CON. (b/#) button • SLOW (◄/►) button

1. • DIMMER button
2. SLEEP button • RDS, PTY button - optional
3. ECHO VOL. ( ), MIC VOL. (/ ) buttons
4. • CLEAR button
5. ZOOM button • MARKER, SEARCH buttons
6. VOLUME -/+ buttons
7. TITLE button

(Use the TITLE button to display the title screen included on DVD video discs.)

1. DISPLAY button
2. • SOUND button

• FEMALE button • AUDIO ( ) button - MALE button - SUBTITLE ( ) button - SHADOW button - RETURN ( ) button

1. MUTE ( ) button

Remote control battery installation

Remove the battery cover on the rear of the remote control, and insert two R03 (size AAA) batteries with the + and - aligned correctly.

Caution

Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.).

Installation and Setup

TV Connection

Make one of the following connections, depending on the capabilities of your existing equipment.

Tip:

• Depending on your TV and other equipment you wish to connect, there are various ways you could connect the unit. Use one of the connections described below.
• Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections.

Caution:

• Make sure the unit is connected directly to the TV. Select an exact AV input on your TV.
• Do not connect your unit to TV via your VCR. The DVD image could be distorted by the copy protection system.

Rear of TV

Video connection

Connect the VIDEO OUT jack from the unit to the VIDEO IN jack on the TV using the video cable (V).

Component Video connection

Connect the COMPONENT VIDEO OUT jacks from the unit to the corresponding jacks on the TV using an Y PB PR cable (C).

• If your television is a high-definition or "digital ready" television, you may take advantage of the DVD/CD Receiver's progressive scan output for higher video resolution.
• If your TV does not accept your resolution setting, abnormal picture appears on the screen. Please read owner's manual for TV then set the resolution that your TV can accept.

SCART connection

Connect the EURO AV (TO TV) socket on the DVD/CD Receiver to the corresponding jacks on the TV using the scart cable (T).

Note:

A picture via scart input is not supported.

Caution

VIDEO OUT SELECTOR switch

In power-off state, select either COMPONENT VIDEO OUT (PROGRESSIVE SCAN) or SCART signal of EURO AV (TO TV) terminal depending on how to connect the unit to the TV.

Selecting input source

You can use VCRs or other units connected to the EURO AV (TO TV) connector. Refer to the Owner's Manual supplied with the unit for further information on the operation.

Press AUX on the remote control.

TV-AUDIO : for selecting the TV audio signal from SCART.

Note:

You can also select the input source by pressing repeatedly FUNC. on the front panel.

Antenna (Aerial) Connection

Connect the supplied FM/AM antennas for listening to the radio.

Note:

• To prevent noise pickup, keep the AM loop antenna away from the unit and other components.
• Be sure to fully extend the FM wire antenna. • After connecting the FM wire antenna, keep it as horizontal as possible.

PORTABLE Function

When you connect a portable music playing device to the PORTABLE IN jack on this device using a 3.5mm mini stereo cable (not supplied), you can hear the sound output from the portable device through the

speaker.

1. Connect the PORTABLE IN jack on this device to a headphone jack or line out on another portable device using a cable.
2. Press AUX repeatedly to select the PORTABLE function.
3. Start playing the connected portable device.
4. Adjust the volume using VOLUME.

Note:

The 3.5mm mini stereo cable is sold separately.

Headphone Jack

Connect a stereo headphone plug (3.5mm) into the headphone jack.

Connecting headphones will switch off the speakers.

Using Microphone

You can sing along with a music source by connecting a microphone to the unit.

1. Connect your microphone to the MIC1/MIC2 jacks. "MIC IN" and "MIC" will be shown in the display window.
2. Play the music you want.
3. Sing along with the accompaniment. Adjust the microphone volume by pressing the MIC VOL. button (or turning the MIC VOLUME KNOB). (MIN, 1 - 14, MAX steps)

Note:

• When not using the microphone, set the MIC VOL. to minimum or turn off the MICs and remove the microphone from the MIC Jacks.
• If the microphone is set too near the speaker, a howling sound may be produced. In this case, move the microphone away from the speaker or decrease the sound level by using MIC VOL..
• If sound through the microphone is extremely loud, it may be distorted. In this case, decrease MIC volume.

To Adjust ECHO Volume

You can give an echo effect to the sound from the microphones.

Press ECHO VOL. (☐/☐) on the remote control to increase the echo volume or decrease it. (MIN, 1 - 14, MAX steps)

USB Function

You can enjoy the media files such as pictures (JPG), movies (Video file) and tunes (MP3/WMA file) saved in an MP3 player or USB memory by connecting storage devices to the USB port of this unit.

Compatible Devices

1. Devices which require additional program installation when you have connected it to a computer, are not supported.
2. MP3 Player : Flash type MP3 player.

- The MP3 player requiring installation of a driver is not supported.

1. USB Flash Drive: Devices that support USB2.0 or USB1.1.

Basic Playback

1. Connect the USB device to the USB port of your unit.
2. Press USB to select USB function.
3. Press PLAY.

Note:

Besides Basic Playback, if you want to operate other functions, see the CD Playback section. Refer to pages 15, 16, and 17.

To Remove the USB from the unit

1. Choose other functions except USB function in order to remove the USB.
2. Remove the USB from the unit.

Note:

• Do not extract the USB device while operating. • A backup is recommended to prevent data damage.
• If you use a USB extension cable or USB hub, the USB device might not be recognized.
• A device using NTFS file system is not supported. (Only FAT (16/32) file system is supported.)
• The USB function of this unit does not support all USB devices. • Digital camera and mobile phone are not supported.
• This unit is not supported when the total number of files is 1000 or more.
• If the drive of USB device is two or more, a drive folder is displayed on the screen. If you want to move to the previous menu after you select a folder, press RETURN.

Speaker System Connection

Connect the speaker cable to the speaker terminal.

Note:

• Be sure to match the speaker cable to the appropriate terminal on the components: + to + and - to -. If the cords are reversed, the sound will be distorted and will lack base.
• Connect the Left/ Right speaker correctly. If it reversed, the sound may be distorted.

Front speaker (R) Front speaker (L)

Setting the Clock

1. Press CLOCK.
2. Select a 24 hour time system or a 12 hour time system by pressing ◀◀◀/▶▶▶.

(12HR)

or

(24HR)

1. Press SET to confirm the selected hour time system.
2. Press ◀◀◀/▶▶ on the front panel to set the correct hours.
3. Press SET
4. Press ◀◀◀/▶▶ on the front panel to set the correct minutes.
5. Press SET and the correct time is shown on the display window.
6. Press CLOCK at any time to display the time for about 5 seconds.

Note:

If you want to reset the clock, press and hold CLOCK for more than 2 seconds.

Timer Function

With the TIMER function, you can have the radio reception, CD play and USB play turned on and off at the desired time.

1. Press CLOCK to check the current time. (If you don't set clock, the timer function doesn't work.)
2. Press TIMER to enter the timer setting mode. If you want to correct the previous memorized TIMER setting, press and hold the TIMER for more than 2 seconds.
3. The previously memorized timer on the time and "①" indicator appears in the display window.
4. Each function (TUNER → DVD/CD → USB) flashes in the display window in turn. Press SET when the desired function is flashing.
5. a. When you select the TUNER function, select the previously memorized preset number by pressing I◄◄/►►I on the front panel and press SET.

- "ON TIME" indicator appears for about 0.5 seconds in the display window and then disappears.

b. When you select the DVD/CD or USB function,

- "ON TIME" indicator appears for about 0.5 seconds in the display window and then disappears.

1. Set the hour to switch on by pressing ◀◀◀/▶▶▶ on the front panel.
2. Press SET.
3. Set the minute to switch on by pressing ◀◀/▶◀ on the front panel.
4. Press SET.

- "OFF TIME" indicator appears for about 0.5 seconds in the display window and then disappears.

1. Set the hour to switch off by pressing ◀◀◀/▶▶▶ on the front panel.
2. Press SET
3. Set the minute to switch off by pressing ◀◀◀/▶▶ on the front panel.
4. Press SET.
5. Adjust the volume level by pressing ◀◀◀/▶▶▶ on the front panel.
6. Press SET.

“①” appears in the display window and the timer setting has been completed.

1. Switch the system off.

The selected function is automatically switched on and off at the time set.

To cancel or check the timer

Each time the TIMER is pressed you can select the timer set or cancel. You can also check the timer setting status.

To activate or check the timer, press the TIMER that “💡” appears in the display window.

To cancel the TIMER, press the TIMER that “①” disappears in the display window.

Note:

• If you insert the DVD or DivX except audio CD/MP3/WMA on the unit, the timer function will be operated to the TUNER. • This is not supported in the multi card reader.

Sleep Timer Function

When the sleep timer is used, the power is automatically turned off after the specified time has elapsed.

1. Press SLEEP to set the desired sleep time. The SLEEP indicator and sleep time appear in the display window.
2. Each time you press SLEEP, the setting changes in the following order.

SLEEP 180 (minutes) - 150 (minutes) - 120 (minutes) → 90 (minutes) → 80 (minutes) → 70 (minutes) → 60 (minutes) → 50 (minutes) → 40 (minutes) → 30 (minutes) → 20 (minutes) → 10 (minutes) → OFF (No display)

Note:

If you press SLEEP while the sleep time is displayed, the SLEEP time is reset.

To cancel the sleep timer mode

If you have to stop the function, press SLEEP repeatedly until "SLEEP 10" appears, and then press SLEEP once again while "SLEEP 10" is displayed.

Displaying Disc Information On-screen

You can display various information about the disc loaded on-screen.

1. Press DISPLAY to show various playback information. The displayed items differ depending on the disc type or playing status.
2. You can select an item by pressing ▲/▼ and change or select the setting by pressing ◀/▶ • Title (Track) – Current title (or track) number/total number of titles (or tracks). • Chapter – Current chapter number/total number of chapters. ● Time – Elapsed playing time. • Audio – Selected audio language or channel.
3. Subtitle – Selected subtitle.
4. Angle – Selected angle/total number of angles. • Sound – Selected sound mode.

Note:

If no button is pressed for a few seconds, the on-screen display disappears.

Initial Settings

Using the Setup menu, you can adjust various settings such as picture and sound. You can also set the language for subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 11 to 14.

To display and exit the Menu:

Press SETUP to display the menu. Press SETUP again to return to the initial screen.

To go to the next level: Press ▶.

To go back to the previous level: Press ◀.

GENERAL OPERATION

1. Press SETUP. The Setup menu appears.
2. Use ▲ / ▼ to select the desired option, then press ▶ to move to the second level. The screen shows the current setting for the selected item, as well as alternate settings.
3. Use ▲ / ▼ to select the second desired option, then press ▶ to move to the third level.
4. Use ▲ / ▼ to select the desired setting, then press SELECT/ENTER to confirm your selection. Some items require additional steps.
5. Press SETUP or PLAY to exit the Setup menu.

LANGUAGE

OSD

Select a language for the Setup menu and the on-screen display.

Disc Audio / Subtitle / Menu

Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu.

Original – Refers to the original language in which the disc was recorded.

Other – To select another language, press numeric buttons and then SELECT/ENTER to enter the corresponding 4-digit number according to the language code list on page 28. If you enter the wrong language code, press CLEAR.

DISPLAY

TV Aspect

4:3 – Select when a standard 4:3 TV is connected.

16:9 – Select when a 16:9 wide TV is connected.

Display Mode

The Display Mode setting works only when the TV Aspect mode is set to "4:3".

Letterbox – Displays a wide picture with bands on the upper and lower portions of the screen.

Panscan – Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit.

Progressive Scan

Progressive Scan Video provides the highest quality pictures with less flickering.

If you are using the COMPONENT VIDEO OUT jacks, but are connecting the unit to a standard (analog) television, set Progressive Scan to Off.

If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On.

To Turn ON progressive scan:

Connect component out of the unit to the input of your monitor/television, set your television or monitor to Component Input.

1. Select "Progressive Scan" on the DISPLAY menu then press ▶.
2. Select "On" using ▲ / ▼
3. Pressing SELECT/ENTER will set the player to Progressive scan mode.

Note:

Progressive Scan cannot be selected in the setup menu when the VIDEO OUT SELECTOR switch is set at SCART position.

Caution:

Once the setting for progressive scan output is entered, an image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan to On in error, you must reset the unit. First, remove the disc in the unit. Next, press STOP( ■ ) and hold it for five seconds before releasing it. The video output will be restored to the standard setting, and a picture will once again be visible on a conventional analog TV or monitor.

AUDIO

Each DVD disc has a variety of audio output options. Set the unit's AUDIO options according to the type of audio system you use.

Dynamic Range Control (DRC)

With the DVD*1 format, you can hear a program's soundtrack in the most accurate and realistic presentation, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). Then, you may listen to a movie at a lower volume without losing clarity of sound. Set DRC to On for this effect. *1: Dolby Digital only

Vocal

Set Vocal to On only when a multi-channel karaoke DVD is playing. The karaoke channels on the disc will mix into normal stereo sound.

LOCK (Parental Control)

Rating

Blocks playback of rated DVDs based on their contents. Not all discs are rated.

1. Select "Rating" on the LOCK menu then press ▶.
2. To access the LOCK options, you must input the password you have created. If you have not yet entered password, you are prompted to do so. Input a password and press SELECT/ENTER. Enter it again and press SELECT/ENTER to verify. If you make a mistake before pressing SELECT/ENTER, press CLEAR.
3. Select a rating from 1 to 8 using ▲ / ▼.

Rating 1-8: Rating one (1) has the most restrictions and rating eight (8) is the least restrictive.

Unlock: If you select unlock, parental control is not active and the disc plays in full.

1. Press SELECT/ENTER to confirm your rating selection, then press SETUP to exit the menu.

Password

You can enter or change password.

1. Select "Password" on the LOCK menu and then press ▶.
2. Follow the step 2 as shown above (Rating). To change the password, press SELECT/ENTER when the "Change" option is highlighted. Input a password and press SELECT/ENTER. Enter it again and press SELECT/ENTER to verify.
3. Press SETUP to exit the menu.

If you forget your password

If you forget your password, you can clear it using the following steps:

1. Press SETUP to display the Setup menu.
2. Input the 6-digit number "210499" and press SELECT/ENTER. The password is cleared.

Area Code

Enter the code of the area whose standards were used to rate the DVD video disc, based on the list on page 28.

1. Select "Area Code" on the LOCK menu then press ▶.
2. Follow step 2 as shown in the previous paragraph (Rating).
3. Select the first character using ▲ / ▼.
4. Press ▶ and select the second character using ▲ / ▼.
5. Press SELECT/ENTER to confirm your Area code selection.

OTHERS

DivX(R) Registration

We provide you the DivX® VOD (Video On Demand) registration code that allows you to rent and purchase videos based on the DivX® VOD service. For more information, visit www.divx.com/vod.

1. Select "DivX(R) Registration" option and then press ▶.
2. Press SELECT/ENTER while "Select" is selected and the registration code will appear. Use the registration code to purchase or rent the videos from DivX® VOD service at www.divx.com/vod. Follow the instructions and download the video onto a disc for playback on this unit.
3. Press SELECT/ENTER to exit.

Note:

All the downloaded videos from DivX® VOD can only be played back on this unit.

Semi Karaoke

When a chapter/title/track is fully finished, this function shows the score on the screen with a fanfare sound.

On: Turn the "Semi Karaoke" function on. When you finish singing, a score will appear on the screen.

Off: Turn the "Semi Karaoke" function off. Fanfare and score do not appear on the screen.

Available discs for the Semi Karaoke function:

• DVD discs • DVD Karaoke Discs

Note:

• This function operates in DVD/CD mode.
• The Semi Karaoke function is available only when a microphone is connected.
• When watching movies, turn "off" the Semi Karaoke at the SETUP menu or enjoy it without connecting the MIC if the fanfare or score appears during changing a chapter.

Operation

General features

Buttons Operations		Discs
OPEN / CLOSE Opens or closes the disc tray.		ALL
II (PAUSE)	During playback, press II to pause playback.	ALL
	Press II repeatedly to play Frame-by-Frame.	DVD	DivX
SKIP (I◄◄ / ►►)	During playback, press SKIP (I◄◄ or ►►) to go to the next chapter/track or to return to the beginning of the current chapter/track.	ALL
	Press SKIP I◄◄ twice briefly to step back to the previous chapter/track.
SCAN (◄◄ / ►►)	During playback, press SCAN (◄◄ or ►►) repeatedly to select the required scan speed.	DVD	MP3 DivX
	DVD :◄◄,◄◄◄,◄◄◄◄,◄◄◄◄◄,◄◄◄◄◄◄ or ►►, ►►►, ►►►►, ►►►►►, ►►►►►		WMA
	DivX disc :◄◄,◄◄◄,◄◄◄◄,◄◄◄◄◄ or ►►, ►►►, ►►►►, ►►►►►
	WMA/MP3, Audio CD :◄◄(X2, X4, X8) or ►►(X2, X4, X8)
REPEAT	During playback, press REPEAT repeatedly to select a desired repeat mode.	DVD	MP3 DivX
	DVD Video discs: Chapter/Title/Off	ACD	WMA
	Audio CD, DivX/MP3/WMA discs: Track/All/Off
REPEAT A-B	During playback, press REPEAT A-B to select a point A and a point B and repeats a sequence from point A (Starting point) to point B (End point).	DVD
	Press REPEAT A-B to exit.
ZOOM	During playback or in the pause mode, press ZOOM to the video image (3 steps).	DVD
	You can move through the zoomed picture using ◀►▲▼.
TITLE If the current DVD title has a menu, the title menu appears on the screen. Otherwise, the disc menu may appears.		DVD
MENU The disc menu appears on the screen.		DVD
(SUBTITLE)	During playback, press SUBTITLE repeatedly to select a desired subtitle language.	DVD	DivX
(AUDIO language)	During playback, press AUDIO repeatedly to hear a different audio language or audio track.	DVD	DivX
SLOW	Press SLOW (◄◄ or ►►) to select required speed. DVD :◄◄ (1/2, 1/4, 1/8, 1/16) or ►► (1/2, 1/4, 1/8, 1/16)	DVD

Notes on general features:

- Zoom may not work on some DVDs.

- The A-B repeat function is available only in the current title.

Additional features

Time Search DivXD

To start playing at any chosen time on the disc:

1. Press DISPLAY during playback.
2. Press ▲ / ▼ to select the time clock icon and "--:--:" appears.
3. Input the required start time in hours, minutes, and seconds. If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then input the correct numbers.
4. Press SELECT/ENTER to confirm. Playback starts from the selected time.

Marker Search DivXD

To enter a Marker

You can start playback from up to nine memorized points. To enter a marker, press MARKER at the desired point on the disc. The Marker icon appears on the TV screen briefly. Repeat to enter up to nine markers.

To Recall or Clear a Marked Scene

1. During disc playback, press SEARCH. The marker search menu appears on the screen.
2. Within 10 seconds, press ◀/▶ to select a marker number that you want to recall or clear.
3. Press SELECT/ENTER and playback starts from the marked scene. Or press CLEAR and the marker number is erased from the list.
4. You can play any marker by inputting its number on the marker search menu.

Screen Saver

The screen saver appears when you leave the unit in Stop mode for about five minutes.

Last Scene Memory DVD

This unit memorizes the last scene from the last disc that is viewed. The last scene remains in the memory even if you remove the disc from the unit or switch off the unit. If you load a disc that has the scene memorized, the scene is automatically recalled.

Note:

This unit does not memorize the scene of a disc if you switch off the unit before commencing to play the disc.

1.5 speed playback

MP3D DWMA ACD

You can quickly enjoy a music and movie.

The 1.5 speed allows you to watch the pictures and listen to the sound quicker than playing at a normal speed on the disc.

1. Press PLAY during the normal playback. The screen will appear at 1.5 speed with sound.
2. To return to the normal PLAY, press PLAY.

System Select

You must select an appropriate system mode for your TV system. If NO DISC appears in the display window, press and hold PAUSE/STEP for more than 5 seconds to select a system (PAL, NTSC or AUTO).

- When the selected system is not compatible with the system of your TV, normal colour picture may not be displayed.

NTSC: Select when unit is connected with NTSC-TV.

PAL: Select when unit is connected with PAL-TV.

AUTO: Select when unit is connected with Multi system TV.

Playing an Audio CD or MP3/WMA file

This unit can play Audio CDs or MP3/WMA files.

MP3/ WMA/ Audio CD

Once you insert an MP3/WMA files recording media Audio CD, a menu appears on the TV screen.

Press ▲ / ▼ to select a track/file and then press PLAY or SELECT/ENTER, and playback starts. You can use variable playback functions. Refer to the page 15, 16.

ID3 TAG

When playing a file containing information such as track titles, you can see the information by pressing DISPLAY repeatedly. The information [ Folder and file name, Song, Artist, Album, Genre, Comment, Time information ] of the MP3/WMA file will be shown in the display window or TV screen.

To move to next or previous files, press the SKIP (I◄◄ / ►►►) button.

Tip:

• Press MENU to move to the next page.
• On a CD with MP3/WMA and JPEG, you can switch between MP3/WMA and JPEG. Press TITLE, and the word MUSIC or PHOTO at the top of the menu is highlighted.

MP3 / WMA disc compatibility with this player is limited as follows:

• Sampling frequency: within 32 - 48 kHz (MP3), within 24 - 48 kHz (WMA)
• Bit rate: within 32 - 320 kbps (MP3), 40 - 192 kbps (WMA)
• The unit cannot read an MP3/WMA file that has a file extension other than ".mp3" / ".wma". • CD-R physical format should be ISO 9660
• If you record MP3 / WMA files using software that cannot create a file system (e.g., Direct-CD), it is impossible to play back MP3 / WMA files. We recommend that you use Easy-CD Creator, which creates an ISO 9660 file system.
• File names should have a maximum of 8 letters and must incorporate an .mp3 or .wma extension.
• They should not contain special characters such as / ? * : " < > | etc.
• The total number of files on the disc should be less than 999.

This unit requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain pre-existing conditions (see above) to ensure compatible playback.

Customers should note that permission is required in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner.

Programmed Playback

The program function enables you to store your favorite tracks from any disc in the unit memory. A program can contain 300 tracks.

1. Insert a disc.

Audio CD and MP3/WMA discs:

1. Select a track on the "List", and then press

PROG.MEMO. or select the "(Add)" icon and then press SELECT/ENTER to place the selected track on the "Program" list. Repeat to place additional tracks on the list.

Note:

You can add all tracks in the disc. Select the "A→ (Add All)" icon then press SELECT/ENTER.

1. Select the track you want to start playing on the "Program" list. Press MENU to move to the next page.
2. Press PLAY or SELECT/ENTER to start. Playback begins in the order in which you programmed the tracks. Playback stops after all of the tracks on the "Program" list have played once.
3. To resume normal playback from programmed playback, select a track of AUDIO CD (or MP3/WMA) list and then press PLAY.

Repeat Programmed Tracks

1. Press REPEAT when playing a disc. The repeat icon appears.
2. Press REPEAT to select a desired repeat mode.
3. TRACK: repeats the current track
4. ALL: repeats all the tracks on programmed list.
5. Off (No display): does not play repeatedly.

Erasing a Track from "Program" List

1. Use ▲▼ to select the track that you wish to erase from the Program list.
2. Press CLEAR. Alternatively, select " (Delete)" icon then press SELECT/ENTER to place the selected track on the Program list. Repeat to erase additional tracks on the list.

Erasing the Complete Program List

Use ▲ / ▼ to select " (Del all)" and then press SELECT/ENTER.

Note:

The programs are also cleared when the disc is removed.

Viewing a JPEG file

This unit can play discs with JPEG files.

Before playing JPEG recordings, read the notes on JPEG Recordings on the right.

1. Insert a disc and close the tray.

The PHOTO menu appears on the TV screen.

1. Press ▲ / ▼ to select a folder, and then press SELECT/ENTER. A list of files in the folder appears.

If you are in a file list and want to return to the previous Folder list, use ▲ / ▼ to highlight 🔒. and press SELECT/ENTER or PLAY.

1. If you want to view a particular file, press ▲ / ▼ to highlight a file and press SELECT/ENTER or PLAY. While viewing a file, you can press STOP to move to the previous menu (JPEG menu).

Slide Show

Use ▲▼◀▶ to highlight (Slide Show), then press SELECT/ENTER or PLAY.

Tip:

• There are four Slide Speed options: (Slow), >> (Normal), >>> (Fast), and II (off).

Use ▲ /▼ /◄ /► to highlight Speed. Then, use ◀ / ► to select the option you want, and then press SELECT/ENTER.

Use ▲ /▼ /◄ /► to highlight the Speed. Then, use ◀ / ► to select the option you want to use and then press SELECT/ENTER.

- If you set the Speed option to Off, the slide show is not active.

Press PAUSE/STEP during the slide show. The unit will now enter PAUSE mode.

1. Press PAUSE/STEP during the slide show. The unit will now enter PAUSE mode.
2. To return to the slide show, press PLAY or press PAUSE/STEP again.

Press SKIP (I◄◄ or ►►I) once while viewing a picture to advance to the next or previous file.

Press SKIP (I◄◄ or ►►I) once during viewing a picture to advance to the next or previous file.

Rotating the picture

Press ▲/▼/◄/► while viewing a picture to rotate it clockwise or counter-clockwise.

Zoom

Press the ZOOM button repeatedly.

Zoom on ↔ Zoom off

Press ▲, ▶, or ▶▶ to enlarge the photo (or video) image.

Press ▼, ◀, or ◀◀ to reduce the photo (or video) image.

JPEG file compatibility with this player is limited as follows:

- Depending on the size and number of JPEG files, it may take a long time for the unit to read the disc's contents. If you don't see an on-screen display after several minutes, some files may be too large — reduce the resolution of the JPEG files to less than 2M pixels (e.g., 2760 x 2048 pixels) and burn another disc.

- The total number of files and folders on the disc should be less than 999.

- Some discs may not operate due to a different recording format or the condition of the disc.

- Ensure that all selected files have the ".jpg" extension when copying them into the CD layout.

- If files have ".jpe" or ".jpeg" extensions, please rename them as ".jpg" files.

- File names without the ".jpg" extension will not be read by this unit, even if the files are shown as JPEG image files in Windows Explorer.

Playing a DivX Movie file

Using this unit, you can play DivX files.

1. Insert a disc and close the tray. The MOVIE menu appears on the TV screen.

1. Press ▲ / ▼ to select a folder and then press SELECT/ENTER. A list of files in the folder appears. If you are in a file list and want to return to the Folder list, use ▲ / ▼ to highlight 📄. and press SELECT/ENTER or PLAY.
2. If you want to view a particular file, press ▲ / ▼ to highlight a file and press SELECT/ENTER or PLAY.
3. Press STOP to exit.

Tip:

• Press MENU to move to the next page.
• On a CD with MP3/WMA, JPEG and MOVIE file, you can switch MUSIC, PHOTO and MOVIE menu. Press TITLE and MUSIC, PHOTO and MOVIE word on top of the menu is highlighted.

Note:

• Be sure to select "SUBTITLE ON" mode by pressing the subtitle file every time before playing a DivX file.
• When the subtile has more than two languages in the file, original subtile is only available.
• You can not adjust sound mode and VIRTUAL sound during the DivX file playing.
• The DivX subtitle file name has to be identified with the DivX file name to display by this unit.

Notice for displaying the DivX subtitle

If the subtitle does not display properly during playback, press and hold SUBTITLE for about 3 seconds then press SUBTITLE to select another language code until the subtitle is displayed properly.

DivX file compatibility with this player is limited as follows:

• Available resolution size of the DivX file is under 800x600 (W x H) pixels.
• The file name of the DivX subtitle is available by 45 characters.
• If there is impossible code to express in the DivX file, it may be displayed as "_" mark on the display.
• If the number of the screen frame is over 30 per 1 second, this unit may not operate normally.
• If the video and audio structure of recorded files is not interleaved, either video or audio is outputted.

Playable DivX file

- ".avi", ".mpg", ".mpeg", ".divx"

Playable Subtitle format

SubRip(*.srt/*.txt) SAMI(*.smi) SubStation Alpha(*.ssa/*.txt) MicroDVD(*.sub/*.txt) SubViewer 2.0(*.sub/*.txt) VobSub(*.sub)

Playable Codec format

- "DIVX3.xx", "DIVX4.xx", "DIVX5.xx", "MP43", "3IVX".

Playable Audio format

• "AC3", "PCM", "MP3", "WMA".
• Sampling frequency: within 32 - 48 kHz (MP3), within 24 - 48 kHz (WMA)
• Bit rate: within 32 - 320 kbps (MP3), 40 - 192 kbps (WMA)

Presetting the Radio Stations

You can preset 50 stations for FM and AM. Before tuning, make sure that you have turned down the volume to the minimum.

1. Press TUNER/BAND to select the frequency (AM or FM) you want.
2. Select a station you want by pressing TUN. (-/+).

Tuning in automatically

- Press TUN. (-/+) for more than 0.5 second. Scanning stops when the unit tunes in a station.

Tuning in manually

Press TUN. (-/+) briefly and repeatedly.

1. Press PROG./MEMO. A preset number will flash in the display window.
2. Press PRESET (▲/▼) to select the preset number you want.
3. Press PROG./MEMO. again.

The station is stored.

1. Repeat steps 1 (or 2) to 5 to store other stations.

To delete all the memorized stations

Press and hold PROG./MEMO. for about two seconds, "ERASE ALL" appears in the display window, then press PROG./MEMO. again; the stations are deleted.

For your reference

If all stations have already been entered, the "FULL" message will appear in the display window for a moment, and then a preset number will flash. To change the preset number, follow steps 4-5.

To recall presets

Press and hold PRESET (▲/▼) until the desired preset number appears, or press it repeatedly.

Listening to the Radio

1. Press TUNER/BAND to select the frequency (AM or FM) you want.

The last received station is tuned in.

1. Press PRESET (▲/▼) repeatedly to select the preset station you want.
2. Each time you press the button, the unit tunes in one preset station at a time.
3. Adjust the volume by pressing VOLUME (-/+) repeatedly.

To listen to non-preset radio stations

• For manual tuning, see "Tuning in manually" in step 2 on the left.
• For automatic tuning, see "Tuning in automatically" in step 2 on the left.

To turn off the radio

Press POWER to turn the unit off or select another function mode (DVD/CD, USB, AUX).

For your reference

• If an FM program is noisy: Press MO./ST. so that "STEREO" appears in the display window. There will be no stereo effect, but the reception will be improved. Press MO./ST. again to restore the stereo effect.
• To improve reception: Reposition the supplied antennas.

RDS Operation - Optional

This unit is equipped with RDS (Radio Data System), which brings a wide range of information to FM radio. Now in use in many countries, RDS is a system for transmitting station call signs or network information, a description of station programme type, text messages about the station or specifics of musical selection, and the correct time.

RDS TUNING

When an FM station is tuned in and it contains RDS data, the unit will automatically display the station's call sign, and the RDS indicator will light in the display window, as well as indicators for the RDS services programme (PS), programme type recognition (PTY), Radiotext (RT), and Clock Time (CT) if transmitted by the station.

RDS DISPLAY OPTIONS

The RDS system is capable of transmitting a wide variety of information in addition to the initial call sign that appears when a station is first tuned. In normal RDS operation, the display will indicate the station name, broadcast network, or call letters. Pressing RDS enables you to cycle through the various data types in the sequence:

(PS → FREQUENCY → PTY → RT → CT)

• PS (Programme Service name) - The name of the channel is shown in the display window.
• PTY (Programme type recognition) - The name of the programme type is shown in the display window.
• RT (Radiotext) - A "text" message contains special information from the broadcast station. Note that this message may scroll across the display to permit the full message to be read.
• CT (Time controlled by the channel) - Enables the unit to receive the actual time and show it in the Display Window.

Note:

Some RDS stations may not choose to include some of these additional features. If the data required for the selected mode is not being transmitted, the Display Window will show a PTY NONE, RT NONE, CT NONE, PS NONE message.

Programme Search (PTY)

A major benefit of RDS is its ability to encode broadcasts with Programme Type (PTY) codes that indicate the type of material being broadcast. The following list shows the abbreviations used to indicate each PTY along with an explanation of the PTY.

NEWS News
AFFAIRS Current Affairs
INFO Information
SPORT Sports
EDUCATE Educational
DRAMA Drama
CULTURE Culture
SCIENCE	Science
VARIED Varied Speech Programme
POP M	Popular Music
ROCK M	Rock Music
EASY M	Easy Listening Music
LIGHT M	Light Music
CLASSICS	Classical Music
OTHER M	Other Music
WEATHER	Weather Information
FINANCE	Financial Programmes
CHILDREN	Children's Programmes
SOCIAL	Social Affairs Programmes
RELIGION	Religious Broadcasts
PHONE IN	Phone-In Programmes
TRAVEL	Travel and Touring
LEISURE	Leisure and Hobby
JAZZ Jazz Music
COUNTRY	Country Music
NATION M	National Music
OLDIES	Oldies Music
FOLK M	Folk Music
DOCUMENT	Documentary Programmes
TEST	Station Alarm Test Message
ALARM !	Emergency Broadcast Information

You may search for a specific Programme Type (PTY) by following these steps:

1. Press TUNER/BAND to select FM mode.
2. Press PTY, the display will show the last PTY in use.
3. Press PTY repeatedly to select a desired PTY.
4. When the PTY is selected, press TUN.(-/+). The unit will go into an automatic search mode. When a station is tuned, the search will stop.

Dimmer

This function will change the brightness of the display window on the front panel during power-on status. Press the DIMMER repeatedly.

Mute

Press MUTE to mute your unit.

You can mute your unit in order, for example, to answer the telephone.

Sound Mode

You can enjoy surround sound simply by selecting one of the pre-programmed sound fields according to the program you want to listen to (2 ch. sound only).

Press SOUND MODE repeatedly.

BYPASS → ON STAGE → STUDIO → CLUB → HALL → THEATER 1 → CHURCH → BYPASS...

Note:

Initial sound mode is BYPASS.

EQUALIZER Effect

You can choose 7 fixed sound impressions and adjust the BASS, MIDDLE and TREBLE.

- You can select a desired sound impressions by using EQ master.

NORMAL USER EQ

POP CLASSIC

JAZZ - DRAMA ROCK

- Press EQ master to select USER EQ.

1. To enter the "USER EQ" setting mode, press SET while "USER EQ" is displayed.
2. In USER EQ mode, press ▶II or ■□ on the front panel repeatedly. Then you can select the sound effect you want among BASS, MIDDLE or TREBLE.
3. When a menu you select is displayed, press ◀◀◀ / ▶▶◀ on the front panel to set the sound level MIN, -4 \~ +4, MAX steps.

- Then the sound level is displayed for a moment and the setting completed.

1. Repeat the steps from 2 to 3 to set other sound effect.
2. Press SET.

DEMO

Press DEMO on the front panel in power off state to demonstrate the function in the display window. To cancel it, press POWER or DEMO again.

XDSS

(Extreme Dynamic Sound System)

Press XDSS plus to reinforce treble, bass and the surround effect.

The "XDSS ON" or "NORMAL" indicator lights.

MP3 Optimizer

This function is optimized for compressible MP3 files so that it improves the bass sound. Each time you press XDSS plus, the setting changes in the following order.

XDSS ON → MP3 -- OPT ON → NORMAL

XTS Pro

The function creates the optimum sound for you to play of the original sound. Each time you press XTS Pro, "XTS -- P ON" or "NORMAL" is displayed in turn.

Note:

The XTS Pro function will not be operated when a headphone has been connected.

VIRTUAL sound

Press VSM to set the VIRTUAL sound.

Source Display Effect

2.1 ch. VIRTUAL 3D STEREO

5.1 ch VIRTUAL VIRTUAL sound

•3D STEREO

Realtime 3D positioned sound rendering technology with stereo sources, optimized for stereo speakers. Listeners may experience amazing virtual surround effects with their own multimedia players.

•VIRTUAL sound

A pending downmix technology converts 5.1 channel to 2 channel sound having directional information of audio. And it makes a 2 channel or 2.1 channel feel 5.1 channel sound.

KARAOKE Operation

You can play KARAOKE (singing along) with karaoke disc by connecting a microphone to the unit.

You can enjoy KARAOKE with a stereo-recorded disc, even if it is a non-karaoke disc, by reducing the singer's voice.

Karaoke Basic Playback

1. Check if the system is connected. (Refer to the page 7-9.)
2. Turn on the powers of TV (or Amplifier) and DVD Karaoke and enter to the video mode on TV.
3. Press OPEN/CLOSE (▲) to open the disc tray and load supplied karaoke disc in the tray with the label facing up.
4. Press OPEN/CLOSE (▲) to close the tray. [TV Screen]

1. Connect the microphone to the MIC 1 or MIC 2 jack.
2. Select the melody number you want by pressing NUMERIC buttons.

If you cancel the selected melody number, press the CLEAR.

1. Press PLAY.

The selected melody number is played.

Sing in tune with the microphone.

After the melody ends, it stops automatically and the score appears.

Karaoke Advanced Playback

To Adjust MIC Volume

Press MIC VOL. (▲/▼) on the Remote Control to increase or decrease the microphone volume. (MIN, 1~14, MAX steps)

To Adjust ECHO Volume

You can add an echo effect to the sound from the microphones.

Press ECHO VOL. (▲/▼) on the Remote Control to increase or decrease the echo volume. (MIN, 1~14, MAX steps)

Key Control

You can change the key to suit your vocal range. You can adjust the key to 13 steps (6 steps higher, 6 steps lower, and the original key).

• The setting appears on the screen.

Press the b- KEY CON. - # buttons repeatedly on the Remote Control to find the key that suits your vocal range.

• To flatten the key one by one, press the KEY CONTROL (b) repeatedly during playback.
• To sharpen the key one by one, press the KEY CONTROL (#) repeatedly during playback.
• To return to the original key, press the KEY CONTROL (b/#) repeatedly until the original key appears.

Reserving the Songs

When you want to make a reservation for the next melody, you can enjoy up to 8 melody reservations without waiting.

1. Press the NUMERIC buttons to reserve the melody number you want in the karaoke disc play mode. The melody number appears on the TV screen.
2. Press PROG./MEMO. The melody number is reserved.
3. Repeat steps 1-2. You can reserve 8 songs.

Tip:

After one song finishes playing, the next song will play automatically.

To cancel the reserved song

Each time you press CLEAR, the reserved songs will be cancelled one by one.

To cancel or change a wrongly reserved song

Press PROG. to move to the desired position, then press CLEAR to cancel the reserved song.

Male/Female Function

If you want to sing a song in a man's or woman's key, press the MALE/FEMALE button repeatedly to change to the man's or woman's key.

Tempo Change

You can use this function when you want to play fast or slow.

• Press TEMPO + repeatedly during singing to play faster.
• Press TEMPO - repeatedly during singing to play slower.

Shadow Function

If the screen caption and the song's subtitle are mixed up, the song's subtitle may be invisible. In this case, to highlight the song's subtitle, press SHADOW. - It will be highlighted by background shadow image.

Karaoke MENU Playback

Preparation

Press MENU on the karaoke mode.

The main MENU appears on the screen.

Main MENU (On the TV screen)

SETUP ( ) settings

1. Select by pressing ▲/▼ on the main menu.
2. Use ◀/▶ to select the desired option then press ENTER.

On: When singing by selection of melody, song score comes out after one piece of song is ended.

To cancel it, select the Off.

FANFARE ON/OFF ( ) FANFARES ON/OFF

On: In condition of POWER ON, scoring fanfare operates. The fanfare sound comes out after singing finished.

To cancel it, select the Off.

On: When singing by selection of melody, song lyric appears on the TV screen.

To cancel it, select the Off.

CHORUS ON/OFF ()4. BACK VOCAL ON/OFF

On: When singing by selection of melody, song chorus is heard a sound.

To cancel it, select the Off.

Note:

To move to the main menu, press MENU.

MUSIC LIST (LIST OF COMPOSITIONS)

LOCAL SONG ( ) and POPULAR SONGS

SONG ( ). FOREIGN SONGS

1. Select by pressing the positions

▲/▼ on the main menu.

The LOCAL SONG, POP SONG and CLASSIC menu will be shown on the TV screen.

by pressing the ▲/▼, and press ENTER.

SONG LIST and SINGER LIST menu will be shown on the TV screen.

1. Select the initial of the song title you want by pressing the ▲/▼, then press ENTER.

1. Select the song title you want by pressing the ▲/▼, and press ENTER.

1. Select the initial

of the singer you want by pressing the ▲/▼ in the SONG LIST and SINGER LIST menu, and press ENTER.

1. Select the singer you want by pressing the ▲/▼, and press ENTER.

1. Select the song title of the singer you want by pressing the ▲/▼, and press ENTER.

Notes:

● To move to the previous mode, select the by pressing the ▲▼, then press ENTER.

- Press ◀/▶ to move to the page.

Select by pressing the JUKA and press ENTER in the LOCAL SONG, POP SONG and CLASSIC menu.

The CLASSIC LIST and COMPOSER LIST menu will be shown on the TV screen.

CLASSIC LIST. SONG LIST

1 Select the initial of the song title you want by pressing the ▲/▼, then press ENTER.

2 Select the song title you want by pressing the ▲/▼, and press ENTER.

COMPOSER LIST. COMPOSER LIST

1 Select the initial of the composer you want by pressing the ▲/▼ in the CLASSIC LIST and COMPOSER LIST menu, and press ENTER.

2 Select the composer you want by pressing the ▲/▼, and press ENTER.

3 Select the song title of the composer you want by pressing the ▲/▼, and press ENTER.

Note:

To move to the previous mode, select the by pressing the ▲▼, then press ENTER.

1. Select by pressing ▲▼ on the main menu.

1. Press ENTER to begin randomly.

CHALLENGE. COMPETITION

It has a function which enjoys a song game dividing by two teams of red team & blue team.

1. Select 4. COMPETITION by pressing ▲/▼ on the main menu.

It appears as below.

1. Select the number of attempts by pressing ▲/▼, and select one of the numeric buttons 1~9 by pressing ◀/► to select the winner's number.
2. Select the desired result by pressing ▲/▼, and select one of 60, 70, 80, or 90 by pressing ◀/► to select the success score.
3. Select START by pressing ▲▼, then press ENTER.

It appears as below.

1. Select the number you want by pressing ▲/▼/◀/► and press ENTER.

Sing along with the accompaniment.

1. Repeat steps 4-5.

Change the team of the red team or blue team alternately.

1. When reaching the targeted winning number, the result will be shown on the TV screen.

It appears as below.

1. Whether you keep going the song game or not, select 1.DA or 2.HET by pressing ▲/▼ as below.

Reference

Language Codes

Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.

Language	Code	Language	Code	Language	Code	Language	Code
Abkhazian	6566	Fiji 7074		Lingala	7678	Singhalese	8373
Afar 6565		Finnish	7073	Lithuanian	7684	Slovak 8375
Afrikaans	6570	French	7082	Macedonian	7775	Slovenian	8376
Albanian	8381	Frisian 7089		Malagasy	7771	Somali 8379
Ameharic	6577	Galician	7176	Malay 7783		Spanish	6983
Arabic	6582	Georgian	7565	Malayalam	7776	Sudanese	8385
Armenian	7289	German	6869	Maltese	7784	Swahili	8387
Assamese	6583	Greek	6976	Maori	7773	Swedish	8386
Aymara	6588	Greenlandic	7576	Marathi 7782		Tagalog	8476
Azerbaijani	6590	Guarani	7178	Moldavian	7779	Tajik	8471
Bashkir 6665		Gujarati	7185	Mongolian	7778	Tamil	8465
Basque	6985	Hausa	7265	Nauru	7865	Tatar 8484
Bengali; Bangla	6678	Hebrew	7387	Nepali	7869	Telugu	8469
Bhutani	6890	Hindi 7273		Norwegian	7879	Thai	8472
Bihari	6672	Hungarian	7285	Oriya	7982	Tibetan 6679
Breton	6682	Icelandic 7383		Panjabi 8065		Tigrinya	8473
Bulgarian	6671	Indonesian	7378	Pashto, Pushto	8083	Tonga	8479
Burmese 7789		Interlingua	7365	Persian	7065	Turkish 8482
Byelorussian	6669	Irish 7165		Polish	8076	Turkmen 8475
Cambodian	7577	Italian 7384		Portuguese	8084	Twi	8487
Catalan	6765	Japanese	7465	Quechua	8185	Ukrainian	8575
Chinese 9072		Javanese	7487	Rhaeto-Romance	8277	Urdu	8582
Corsican 6779		Kannada 7578		Rumanian	8279	Uzbek	8590
Croatian	7282	Kashmiri	7583	Russian	8285	Vietnamese	8673
Czech	6783	Kazakh 7575		Samoan 8377		Volapük	8679
Danish	6865	Kirghiz 7589		Sanskrit	8365	Welsh	6789
Dutch 7876		Korean	7579	Scots Gaelic	7168	Wolof	8779
English 6978		Kurdish	7585	Serbian	8382	Xhosa	8872
Esperanto	6979	Laothian	7679	Serbo-Croatian	8372	Yiddish 7473
Estonian	6984	Latin	7665	Shona	8378	Yoruba	8979
Faroeese 7079		Latvian, Lettish	7686	Sindhi	8368	Zulu	9085

Area Codes

Choose an area code from this list.

Area Code		Area Code		Area Code		Area Code
Afghanistan AF		Ethiopia ET		Malaysia	MY	Saudi Arabia	SA
Argentina AR		Fiji	FJ	Maldives	MV	Senegal	SN
Australia AU		Finland FI		Mexico MX		Singapore SG
Austria AT		France FR		Monaco	MC	Slovak Republic	SK
Belgium BE		Germany	DE	Mongolia	MN	Slovenia	SI
Bhutan BT		Great Britain	GB	Morocco MA		South Africa	ZA
Bolivia BO		Greece	GR	Nepal NP		South Korea	KR
Brazil BR		Greenland	GL	Netherlands	NL	Spain ES
Cambodia KH		Heard and McDonald Islands	HM	Netherlands Antilles	AN	Sri Lanka	LK
Canada CA		Hong Kong	HK	New Zealand	NZ	Sweden SE
Chile CL		Hungary	HU	Nigeria NG		Switzerland CH
China CN		India	IN	Norway	NO	Taiwan TW
Colombia CO		Indonesia	ID	Oman	OM	Thailand	TH
Congo CG		Israel	IL	Pakistan	PK	Turkey TR
Costa Rica CR		Italy	IT	Panama	PA	Uganda UG
Croatia HR		Jamaica	JM	Paraguay PY		Ukraine	UA
Czech Republic	CZ	Japan JP		Philippines	PH	United States	US
Denmark	DK	Kenya KE		Poland PL		Uruguay	UY
Ecuador	EC	Kuwait KW		Portugal	PT	Uzbekistan UZ
Egypt	EG	Libya	LY	Romania	RO	Vietnam	VN
El Salvador	SV	Luxembourg	LU	Russian Federation	RU	Zimbabwe	ZW

Troubleshooting

Check the following guide for the possible cause of a problem before contacting service.

Symptom	Cause	Correction
No power.	The power cord is disconnected.	Plug the power cord securely into the wall outlet.
The power is on, but the unit does not work.	No disc is inserted.	Insert a disc. (Check that the DVD or, audio CD indicator in the DVD display is lit.)
No picture.	The TV is not set to receive DVD signal output.	Select the appropriate video input mode on the TV so the picture from the unit appears on the TV screen.
	The video cable is not connected securely.	Connect the video cable into the jacks securely.
	The connected TV power is turned off.	Turn on the TV.
There is no sound or only a very low-level sound is heard.	The equipment connected with the audio cable is not set to receive DVD signal output.	Select the correct input mode of the unit so you can hear the sound from the unit.
	The power of the equipment connected with the audio cable is turned off.	Turn on the equipment connected with the audio cable.
The playback picture is poor.	The disc is dirty.	Clean the disc.
The unit does not start playback.	No disc is inserted.	Insert a disc. (Check that the DVD. or audio CD indicator in the DVD display is lit.)
	An unplayable disc is inserted.	Insert a playable disc. (Check the disc type, colour system and Regional code.)
	The disc is placed upside down.	Place the disc with the playback side down.
	The disc is not placed within the guide.	Place the disc on the disc tray correctly inside the guide.
	The disc is dirty.	Clean the disc.
	A menu is on the TV screen.	Press the SETUP button to turn off the menu screen.
	The Rating level is set.	Cancel the Rating function or change the rating level.
Loud hum or noise is heard.	The disc is dirty.	Clean the disc.
	The speakers and components are connected poorly.	Connect the speakers and components securely.
	The unit is located too close to the TV.	Move your TV away from the audio components.
Radio stations cannot be tuned in.	The antenna is positioned or connected poorly.	Connect the antenna securely.
		Adjust the antennas and connect an external antenna if necessary.
	The signal strength of the stations is too weak (when tuning in with automatic tuning).	T une in the station manually.
	No stations have been preset or preset stations have been cleared (when tuning by scanning preset stations).	Preset the stations (page 20).
The remote control does not work properly.	The remote control is not pointed at the remote sensor of the unit.	Point the remote control at the remote sensor of the unit.
	The remote control is too far from the unit.	Use the remote control within about 23 ft (7 m).
	There is an obstacle in the path of the remote control and the unit.	Remove the obstacle.
	The batteries in the remote control are not enough.	Replace the batteries with new ones.
The front panel display is too dim.	The Dimmer function is operated	Press DIMMER.
Nothing is display on the front panel display.	The unit enters the power save mode	T o cencel power save mode.

Specifications

General

Power supply: Refer to the back panel of the unit.

Power consumption: Refer to the back panel of the unit.

Net Weight: 3.08 kg (MBD-K102Q)

External dimensions (W x H x D): 300 x 130 x 243 mm

CD/DVD

Laser: Semiconductor laser, wavelength 650 nm

Signal system PAL 625/50, NTSC 525/60

Frequency response (audio) 40 Hz to 20 kHz

Signal-to-noise ratio (audio) More than 75 dB (1 kHz, NOP -3 dB, 20 kHz LPF/A-Filter)

Dynamic range (audio) More than 75 dB

Harmonic distortion (audio) 0.5 % (1 kHz, at 1W position) (20 kHz LPF)

Video

Video output 1.0 V (p-p), 75 Ω, negative sync./ RCA jack x 1/ SCART (TO TV)

COMPONENT VIDEO OUT (Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x 1

(PB)/(PR) 0.7 V (p-p), 75 ohms, RCA jack x 1

Tuner

FM Tuning Range 87.5 - 108.0MHz or 65 - 74MHz, 87.5 - 108.0MHz

Intermediate Frequency 10.7MHz

Signal to Noise Ratio 60/55dB

Frequency Response 50 - 10000Hz

AM Tuning Range 522 - 1620kHz or 520 - 1720kHz

Intermediate Frequency 450kHz

Signal to Noise Ratio 30dB

Frequency Response 80 - 1800Hz

Amplifier

Output Power 50W + 50W (MBD-K102Q)

30W + 30W (MBD-K62Q)

T.H.D 0.5%

Frequency Response 40 - 20000Hz

Signal-to-noise ratio 75dB

Speakers

Speaker Name	MBS-K102V	MBS-K62V
Type	Bass Reflex 2Way 2 Speaker	Bass Reflex 2Way 2Speaker
Impedance	4Ω	4 Ω
Frequency Response	60 - 20000Hz 60 - 20000Hz
Sound Pressure Level	82dB/W (1m)	82dB/W (1m)
Rated Input Power	50W	30W
Max. Input Power	100W	60W
Net Dimensions (WxHxD)	160 x 308 x 233mm	160 x 308 x 204 mm
Net Weight (1EA)	2.8kg	2.5kg

Notice (the date of the production of goods).

First figure ( of the left ) of series number means Year, next 2 figures

- Month of the production of this goods.

Designs and specifications are subject to change without notice.

LG