NI-U400 - Iron PANASONIC - Free user manual and instructions

Product Type	Steam Iron
Brand	Panasonic
Model	NI-U400
Power Source	220-240 V ~ 50-60 Hz
Power Consumption	1930-2300 W
Weight	Approx. 1.5 kg
Dimensions (W x D x H)	Approx. 297 x 125 x 142 mm
Water Tank Capacity	Approx. 300 mL
Soleplate Material	Stainless Steel
Temperature Selector	Variable (3 ranges: low, medium, high)
Steam/Dry Selector	Dry, Low steam, High steam
Power Shot Function	Yes
Vertical Shot Function	Yes
Spray Function	Yes
Anti-Drip System	Yes
Anti-Calc System	Yes
Self-Cleaning Function	Yes (3-way cleaning)
Indicator Light	Thermostat operating indicator
Cord Length	Approx. 2 m (estimated)
Safety Features	Overheat protection (assumed)
Usage	Household use only

Frequently Asked Questions - NI-U400 PANASONIC

Why does my iron make a clicking or metallic sound?

The clicking or metallic sound is normal and is caused by the internal parts of the iron, such as the spray mechanism and leakage prevention components, moving slightly. This is not a malfunction.

Why do clothes sometimes turn brown after ironing?

If there is laundry detergent residue on the fabric, it may turn brown when ironed. To prevent this, ensure clothes are rinsed thoroughly before drying.

What is the white powder coming out of the steam vents?

The white powder is usually hydrophilic treatment residues or minerals from hard water. It is not harmful and can be brushed off clothing. Regular cleaning with the self-cleaning function can reduce buildup.

How do I use the power shot feature?

Set the steam/dry selector to dry, then set the temperature selector to 'MAX'. Pump the power shot button several times at the start of each session. Press the button at intervals of at least 2 seconds to prevent water spotting.

How do I clean the iron using the self-cleaning feature?

Fill the water tank, set temperature to 'MAX', wait for the indicator light to go off, then unplug. Hold the iron horizontally over a sink, press and hold the self-cleaning button and shake the iron back and forth until boiling water flushes out impurities. Repeat as needed.

Why is there no steam coming out?

First, ensure the water tank is filled with tap water up to the 'MAX' mark. Then set the steam/dry selector to the steam position and the temperature selector to 'MAX'. If steam still doesn't appear, move the steam/dry selector several times and reset.

Why does water leak from the steam vents?

This may happen if the power shot button is pressed too quickly. Press it at intervals of at least 2 seconds. Also ensure the iron is hot enough (wait for the indicator light to go off) before using.

How do I use the vertical shot feature?

Hang the garment on a hanger. Hold the iron close but not touching the fabric. Pull the fabric tight and press the power shot button at 2-second intervals while moving the iron over wrinkles. For best results, use on sturdy fabrics.

What type of water should I use in the iron?

Only use tap water. Do not add perfume, vinegar, starch, descaling agents, or other chemicals as they can damage the iron and cause scalding.

How should I store the iron after use?

Empty the water tank, set steam/dry selector to dry, and allow the iron to cool completely on its heel rest. Do not wrap the cord around the iron. Store in a dry place.

USER MANUAL NI-U400 PANASONIC

Operating Instructions

使用说明書

Arahan Penggunaan

Steam Iron

Household Use Only

蒸氣電熨斗

僅限家庭使用

Seterika Wap

Model No./型號/Model NI-U600C,NI-U500C,NI-U400C

Line drawing of a steam iron with cord and power plug (no text or symbols)

NI-U600C

Website: http://www.panasonic.com

© Panasonic Corporation 2017

Printed in China

中國印刷

Dicetak di China

P1017-0

English 3-15

繁體中文 17-29

Melayu 31-43

iB200A-6P70A

Panasonic

English

Operating Instructions

Household Use Only

Model No. NI-U600C,U500C,U400C

Contents

Safety precautions	04-07
Parts identification	07
Before use	08
How to use as an iron	08-09
Guide for Steam/Dry selector	10
Using the "power shot"	10
Using the "vertical shot"	11
Using the "spray"	11
How to care for and store your iron	11-14
Q&A	14
Trouble shooting	15
Specification	15

Thank you for purchasing this Panasonic product.

Before operating this unit, please read these instructions completely and save them for future use.

Safety precautions

To reduce the risk of injury, loss of life, electric shock, fire, and damage to equipment or property, always observe the following safety precautions.

Explanation of symbols

The following symbols are used to classify and describe the level of hazard, injury, and property damage caused when the denotation is disregarded and improper use is performed.

Denotes a potential hazard that could

result in serious injury or death.

Denotes a hazard that could result

in minor injury or damage your

belongings.

The following symbols are used to classify and describe the type of instructions to be observed.

This symbol is used to alert users to a specific

operating procedure that must not be performed

This symbol is used to alert users to a specific operating procedure that must be followed in

operating procedure that must be followed in order to operate the unit safely.

WARNING

To reduce the risk of personal injury, electric shock or fire, please observe the following:

Do not use when the power plug or power cord is

damaged or hot. Never use the iron if the power

plug fits loosely in a household outlet.

Do not leave the iron unattended while it is

connected to the outlet.

Do not connect or disconnect the power plug to a household outlet with wet hands.

Do not damage, modify, forcibly bend, pull, or

twist the power cord.

Do not place anything heavy on or pinch the

power c

Do not wrap the power cord around the iron when storing.

Do not use with the power cord bundled.

Do not use the iron with wet hands.

Do not use in proximity of flammable materials

(such as benzine or the like).

Never modify, disassemble, or repair.

- Doing so may cause ignition or injury due to

abnormal operation. Contact an authorized service

center

Do not immerse the iron in water or other

liquids

Do not supply water to the unit directly from the

faucet.

- Doing so may cause burns, electric shock or fire

due to a short circuit.

WARNING

The iron is not to be used if it has been dropped,

and there are visible signs of damage or if it is

leaking. - Refer servicing to authorized service personnel

To reduce the risk of personal injury, electric shock or fire, please observe the following:

Always ensure the appliance is operated on an

electric power source matched to the rated

voltage indicated on the iron. Fully insert the

power pi

The power plug must be unplugged before filling

water to the water tank.

Regularly clean the power plug to prevent dust

from accumulating.

- Disconnect the power plug and wipe with a dry cloth.

immediately stop using and unplug the power

plug if there is an abnormality or malfunction.

Examples of abnormalities: The iron stars occasional

The iron stops occasionally, the power cord of the power plug is abnormally hot or discolored.

The power plug is abnormally hot of discor. The iron is deformed or smells of burning.

- Refer servicing to authorized service personnel

This appliance is not intended for use by persons

(including children) with reduced physical,

sensory of mental capabilities, or lack of experience and knowledge, unless they have

experience and knowledge, unless they have been given supervision or instruction concerning

use of the appliance by a person responsible for

their safety.

Children should be supervised to ensure that they do not play with the appliance.

they do not play with the appliance. - Failure to do so may cause an accident

- Failure to do so may cause an accident of injury.

The iron must be used and rested on a flat,

stable surface. When placing the iron on its backmost groups that the surface is which the

heel rest, ensure that the surface on which the heel rest is placed is stable.

- If placed on a shaggy rug or other unstable

location, the iron may fall over and cause damage

to the rug, injury or burns.

If the power cord is damaged, it must be replaced

by the manufacturer, its service center, or

similarly qualified persons in order to avoid a

hazard.

- Failure to do so may cause an accident or injury.

CAUTION

To reduce the risk of personal injury, property

damage, electric shock or fire, please observe the

folio

Do not touch the hot surface (such as soleplate,

and the hot surface around it).

CAUTION

Do not touch the steam or "power shot" during use.

When using an ironing board through which steam can penetrate, do not put your hand, leg, etc.,

under the ironing board. Do not aim the steam towards your hand, knee, or any other part of the body.

Do not use steam or * power shot * when the iron is partially sticking out from the ironing board. Do not iron the clothes that you are wearing

Do not insert pins or needles into the iron or use it on clothes with sewing needles or the like inserted.

Do not put the soleplate too close to you or others since steam may unexpectedly erupt from it.

Do not use the iron with the exception of fabric.

Do not store the iron until it has fully cooled down.

Do not store the power cord coiled with sharp angles. - This may damage the cord.

Do not repeatedly and quickly press the power shot button. - If repeating operation over an interval of less than 2 seconds, burns due to hot water leaks may result.

Only use tap water in the iron. Do not add perfume, vinegar, starch, descaling agents, ironing aids or other chemicals in the water tank. - Doing so may it will cause scalds or getting dirty due to the damage product.

If the shot intensity is low, do not operate the power shot button. - Doing so may cause bums due to hot water leaks.

Do not tilt or violently move the iron back and forth. - Doing so may cause burns due to hot water leaks.

Do not use any ironing accessories available on the market. - Doing so may cause burns or damage to cloth due to incorrect operation.

Do not use the iron near walls or furniture that cannot withstand high temperature or humidity. Doing so may damage the wall or furniture.

Do not add hot water in the water tank. - Doing so may cause bums due to hot water splashes.

CAUTION

To reduce the risk of personal injury, property damage, electric shock or fire, please observe the following:

Use a dry iron on moist clothing (spray misted).

Disconnect the power plug by holding the wire instead of pulling on the power cord. - Failure to do so may break the wire, and may cause burns, electric shock, or fire due to a short circuit.

Care should be taken when using the iron. - Steam emission may cause persona injury.

When using with following fabric, test on an inconspicuous area, or place a cloth over the fabric to prevent the fabric from marking. - Expensive or specially processed fabrics (velvet, acrylic, nylon, cashmere, etc.) - Fabrics that are labeled as "low heat" or "medium heat", or dark colored fabrics.

Drain water from the water tank after use. - Failure to do so may cause the water to leak out from the soleplate when the iron is used next time. Always unplug the power plug during not in use - Failure to do so may cause fire, electric shock.

Parts identification

A Thermostat operating indicator light

B Handle C Temperature selector
Power shot button Spray mist button
F Steam/Dry selector G Water fill cover
Self-cleaning button Spray nozzle
① 1927, 1928

Maximum water level indicator
K Temperature select scale position
L Soleplate
Water tank Heel rest
Power cord Power plug
Plug type may vary comply with respective country or region requirement.

Before use

The temperature selector of the iron has words, dots and steam symbols. The dots are symbols for 3 temperature ranges:

• Low temperature •• Medium temperature ••• High temperature

Some fabrics are labeled with these dots as a guide for selecting the proper ironing temperature setting. Use a press cloth if necessary.

Notes:

- The thermostat operating indicator light goes on and off alternately to indicate the changing temperature of so-eplate. If you turn the temperature selector from a high temperature to a lower temperature, wait until the indicator light goes on before using the iron. - Do not place the hot iron on cloth for extended lime or wrap cloth over the hot iron.

How to use as an iron

1. Move the steam/dry selector to the dry position to avoid water leakage.

1. Fill water in the water tank when using steam, power shot, vertical steam or spray.

① Open the water fill cover. Hold the iron as shown and fill the iron with water up to "MAX" (about 300 mL). Use a clean cup for filling.

② Place iron in vertical position to check water level.

③ Close water fill cover firmly to prevent spillage during ironing.

Note: Do not overfill the water tank. The steam will release through the vents when the iron is positioned vertically.

1. Position the iron in the heel rest position and make sure the temperature selector is set to "0".

2. Plug the power plug into an outlet.

3. Set the temperature selector. The thermostat operating indicator light goes on.

Refer to "Guide for Steam/Dry selector" on P10

- Please make sure the temperature select indicator setting is on "MAX" when using "high steam" and "power shot".

Note:

If the temperature of soleplate is high, the light does not go on.

1. Wait until the thermostat operating indicator light goes off. Hold the iron horizontally and move the steam/dry selector into the steam position when using the "power shot". (P10)

7. After each use

① Set the steam/dry selector to the dry position. If the steam/dry selector is not in the dry position after using, remaining water will move into the soieplate and can result in burns when the iron is used next time.

② Empty the water tank immediately after using. Do not store the iron with water in it. If you empty the water tank after it has cooled, heat the iron for about 5 minutes with the temperature selector set to "MAX".

- Do not wind the power cord around the iron. It may be damaged by the hot soleplate.

③ Wait until the iron has cooled before storing it, and always set it on the heel rest to protect the soleplate from scratches, corrosion or stains.

Guide for Steam/Dry selector

English	Steam/Dry selector	Temperature zone	Recommendations
Dry		Choose according to the type of fabrics	For polyester and other synthetic fiber material,
Low steam			For thin or delicate fabrics requiring a small amount of steam
High steam			For fabrics requiring a lot of steam. (i.e. thick materials, items with stubborn wrinkles).

Please make sure the temperature select indicator setting is on * MAX * when using * high steam *.

CAUTION

Do not aim the steam at any parts of your body or others.

Notes:

- The anti-drip system will activate when the temperature of the soleplate's surface drops. The thermostat operating indicator light will go on and steam will stop. It is normal to hear clicking sound during this process. Resume usage only after the thermostat operating indicator light has turned off. - Use an ironing board supports a steam iron.

Using the "power shot"

The "power shot" feature provides extra steam which goes deep into the garment and is helpful for removing stubborn wrinkles. It is necessary to clean the inside of the iron before using the "power shot" feature, if you have not used the "power shot" feature for a prolonged period. Simply test the "power shot" feature several times away from the ironing board and clothes to be ironed. This will prevent brown spotting or water spotting on the clothes.

Set the steam/dry selector to the dry position.

Set the temperature selector to the "MAX" position.

Simply pump the power shot button

• Pump the power shot button several times at the beginning of each ironing session.
• Press the power shot button in intervals of at least 2 seconds
  between use to prevent water spotting
• If the power shot weakens, wait until the thermostat
  operating indicator light goes on, and then off.
  • Use a press cloth if necessary.

Using the "vertical shot"

To get better results when using vertical steam, hang the
Steam, hang the garment on a hanger. Curtains and drapes may also be steamed once they are hung. Hold the iron away from your body, close to but
not touching the fabric. Pull the fabric tightly and pump the power shot button at 2 seconds intervals as you press the iron over the wrinkled fabric.
- If the power shot weakens, wait until the thermostat operating indicator light goes on, and then off.

Using the "spray"

The spray feature is particularly helpful for removing stubborn wrinkles and where extra dampen is needed.
The spray may be used with steam or dry ironing. Simply push the spray mist button whenever spray is desired.
• If the spray does not work immediately, keep triggering until it does.

How to care for and store your iron

3-way cleaning
▶ METHOD(1) Using the self-cleaning feature
1. Fill the water tank with tap water as described in the "How to use as an iron" on P8.
2. Set the temperature select indicator to *0*.
3. Plug the power plug into a household outlet.
4. Stand the iron up and set the temperature select indicator to the "MAX" position.
5. After the thermostat operating indicator light goes off, set the temperature select indicator to * 0 * and unpug.
6. Hold the iron horizontally over the sink, press and hold the self-cleaning button and shake the iron back and forth. Impurities and scale (if any), together with steam and boiling water will be flushed out. Steam will flush out first, and boiling water will flush out after approx. 30 seconds. (Caution: water will be scading hot)

1. Once the water tank has been completely drained, hold the iron horizontally over the sink Or, stand the iron up on a stable surface and place an old towel or similar under the soleplate.
2. Plug the power plug into a household outlet and set the temperature select indicator to "MAX". Impurities together with steam and boiling water will be flushed out.
3. Set the temperature selector to *0* and unplug. Then, turn to METHOD(2)
   ▶ METHOD(2) Using the "power shot" feature
4. Fill the water tank with tap water as described in the "How to use as an iron" on P8.
5. Set the temperature select indicator to *0*.
6. Plug the power plug into a household outlet.
7. Stand the iron up and set the temperature select indicator to "MAX".
8. Hold the iron horizontally over the sink after the thermostat operating indicator light has gone out.

1. Pump the power shot button quickly (at least 2 times per second) for approx. 30 times continuously. While pumping, shake the iron back and forth.

2. Set the temperature select indicator to "0"

3. Unplug and dispose of any water remaining in the water tank.

4. To prevent corrosion of the soleplate vents, plug the power plug into a household outlet, stand the iron up, set the temperature select indicator to "MAX" and preheat for about 5 m

5. Set the temperature select indicator to " 0 " and unplug.

6. iron on a used cloth to remove any impurities on the soleplate.

7. Repeat METHOD(1) and METHOD(2) if venting of the steam does not improve.
8. Use both methods once every two weeks. If the water is very hard (i.e. steam holes on the soleplate are easily blocked by impurities), both methods should be used more frequently.
9. Let the iron cool down on its heel rest and follow the instructions in the * After each use * on P9.

▶ METHOD(3) Anti calc system (Stay clean vents)
The built-in anti calc system in the water tank continuously reduces scale build up in the vaporizing chamber of the iron. This system makes it possible to use the steam function for a long period of time and prevents steam vents from clogging.

Anti-drip system (automatic water seal)

This model has an anti-drip system. When the temperature of the soleplate's surface drops to low, the valve for the vaporizing chamber in the iron automatically closes and stops the water from flowing. This prevents hot unvaporized water from spewing out from the soleplate when the iron has cooled down. With this system, it is unnecessary for you to wait until the inside of the vaporizing chamber dries completely when you store the iron.

Note:

It is not a sign of malfunction even a click sound is heard. This sound can be heard whenever this system is activated.

Electronic 3-way auto shut-off function (NI-U600C only)

• The auto shut-off feature is not intended to take the place of unplugging the cord. The auto shut-off system works regardless of the position of the temperature selector.
• When the iron is left idle with its soleplate facing down or on its side for approx. 1 minutes, the iron will automatically shut off.
• When the iron is left idle on its heel rest for approx. 10 minutes, the iron will automatically shut off.
• To resume ironing and turn the iron on, simply move the iron in any manner. If the iron has been left in the auto shut off mode for more than 10 minutes. Allow the iron to reheat until the indicator light goes off.

1 minute to "0"

1 minute to * 0 *

10 minutes to * 0 *

Always unplug the iron when you finish ironing. Even though the iron is unplugged, the soleplate is still hot. Make sure to rest the iron on its heel, away from fabric.

How to care for your iron

▶ Surface of the iron

- After unpugging and cooling the iron, simply wipe off with a damp cloth and if necessary, use a mid detergent. - Never use any strong cleaners.

▶ Soleplate

• Starch and other residue may be easily removed from the soleplate with a damp cloth
• To avoid scratching the surface, never use a metallic pad to clean the soleplate, and never place the iron on a rough surface.
• The best way to remove synthetic residue from the soleplate is to iron over an old cotton cloth rag after heating the iron.

Note:

- Never use cleaners in the iron, since they may damage the working parts of the iron. Some odor may be released during initial use of the iron, however, this is normal and the odor will not attach to your clothes. Never use steam iron detergent in the iron, since they may damage the working parts of the iron.

Q&A

Question	Answer
Why click sound or metallic sound be heard while using or shaking the iron?	These sounds are made by the interna parts of the iron, spray mechanism, leakage prevention, etc., moving slightly. This is normal.
Why do the clothes sometimes become brown after being ironed?	If there is laundry detergent remaining on the fabric, the clothes may become brown after being ironed.
Why are there white powder/particles coming out of the steam vents while using the steam function (especially when using "power shot")?	The powder/partices are hydrophilic treatment or impurities and minerals found in hard water etc. These are not harmful and can be brushed off clothing.

Trouble shooting

Problem	Causes, Solution
No heating	Make sure the power plug is plugged into a household outlet.
No steam	Fill the water tank with tap water up to "MAX" dot.If there is no steam, set the steam/dry selector to the steam position, or set the temperature selector to "MAX".For poor steam, move the steam/dry selector several times, then reset to the steam position.
Poor steaming power	Press the power shot button several times when the "power shot" appears insufficientWait until the thermostat operating indicator light goes off before using the iron.Set the temperature selector to "MAX".
No spray	Push the spray mist trigger several timesFill the water tank with tap water up to "MAX" dot.
Water leaks from steam vents	Press the power shot button in intervals of at least 2 seconds when using the "power shot".Wait until the thermostat operating indicator light goes off before using the iron.
Clothes are marked	Empty the water tank and fill it with clean water. There may be contaminants in the iron/cup.

Specifications

Model No.	NI-U600C	NI-U500C	NI-U400C
Power source	220-240 V ~ 50-60 Hz
Power consumption	1930-2300 W
Weight (approx.)	1.5 kg
Dimension (approx.)	297 x 125 x 142 mm

This iron is intended for household use only.

Panasonic

使用說明書

僅限家庭使用

No. Mode NI-U600C,U500C,U400C

Kandungan

A Lampu indikator operasi

termostat

① Putang band ② Butang shot

Picu semburan

Pemutar stim/kering