Black Runner - Fitness Equipment SBS - Free user manual and instructions

Product Type	Treadmill
Brand	SBS
Model	Black Runner
Motor Power	2.0 HP
Speed Range	0.5 – 12 km/h
Incline Range	0 – 10%
Running Surface	120 x 42 cm
Display	LCD (Time, Speed, Distance, Calories)
Heart Rate Monitor	Hand pulse sensors
Maximum User Weight	120 kg
Folding	Yes, with hydraulic assistance
Dimensions (Folded)	160 x 70 x 130 cm
Dimensions (Unfolded)	180 x 80 x 140 cm
Product Weight	70 kg
Power Supply	220 – 240 V, 50 Hz
Warranty	2 years
Certifications	CE, RoHS
Included Accessories	Safety key, lubricant, user manual

Frequently Asked Questions - Black Runner SBS

How do I assemble the Black Runner treadmill?

Unpack all parts and follow the step-by-step instructions in the user manual. Typically, you need to attach the upright posts, console, and side rails. Use the provided tools and ensure all bolts are tightened.Always check the manual for specific torque values.

How often should I lubricate the belt?

Lubricate the belt every 3 months or after 100 hours of use. Apply a silicone-based lubricant under the belt while the treadmill is off. Do not over-lubricate.Regular lubrication extends belt and motor life.

What is the safety key for?

The safety key is a magnetic clip that attaches to your clothing. If you fall or move away from the console, the key pulls out and stops the treadmill immediately.Always use the safety key during operation.

What should I do if the treadmill displays an error code?

Refer to the troubleshooting section in the manual. Common errors include E1 (motor overload), E2 (speed sensor issue), and E3 (communication error). Try resetting the treadmill by unplugging it for 30 seconds.If the problem persists, contact SBS customer support.

What is the maximum user weight?

The maximum user weight for the Black Runner is 120 kg (264 lbs). Exceeding this limit can damage the treadmill and void the warranty.Ensure all users stay within this weight limit.

How do I fold and unfold the treadmill?

To fold, lift the running deck until it locks into the vertical position. To unfold, gently push down on the deck while stepping on the base. The hydraulic system provides smooth assistance.Make sure the locking pin is fully engaged before releasing the deck.

Can I calibrate the speed manually?

Yes, you can calibrate the speed by entering the calibration mode (see manual). Use the control buttons to adjust the displayed speed to match a measured value using a tachometer.Calibration ensures accurate workout data.

How accurate are the heart rate sensors?

Hand pulse sensors provide a reasonable estimate of heart rate, but may be less accurate than chest straps. For precise monitoring, use a compatible external heart rate monitor.Keep hands clean and maintain proper contact for best results.

What is covered under the warranty?

The warranty covers defects in materials and workmanship for 2 years. It does not cover normal wear and tear, misuse, or damage from improper assembly. Keep your purchase receipt for warranty claims.Contact SBS customer service for warranty service.

How should I clean and maintain the treadmill?

Wipe the frame and console with a damp cloth after use. Vacuum under and around the treadmill to remove dust. Check belt tension and alignment monthly.Never use harsh chemicals or water on the motor or electronics.

USER MANUAL Black Runner SBS

For other informations please contact us at [e-mail].

UK

BLUETOOTH PAIRING

To pair your smartphone with the Bluetooth® headset:

1) Press the power button for about 3-5 seconds, release when the blue LED starts blinking. You hear "Power On" and immediately after "Bluetooth in connection". At this time, the "SBS Runner headset" is in pairing mode.

2) Activate the Bluetooth® in your phone, search the device "SBS Runner headset" and pair it. You hear "Bluetooth Connected". Under Bluetooth® mode, the blue LED flashes slowly.

3) When there is an incoming call, you will hear the call number "Incoming call 134...".

Briefly press the button to switch between Bluetooth® mode and FM radio mode or TF card play.

For Intelligent Power Saving Mode: when "SBS Runner headset" is in operating mode and no button is pressed within one minute, the "SBS Runner headset" indicator turns off and goes into energy-saving mode. Just press any button and the indicator will turn on again.

FM RADIO MODE

From Bluetooth® mode, briefly press the ◀ button to switch to FM radio and you hear "FM Radio". To enable automatic channel search, press ➞ (you hear "Channel Search"). After about 30 seconds the search for channels is terminated and "SBS Runner headset" will say "Search completed".

The user can start listening to the radio. In radio mode, the green light blinks slowly.

In the FM radio: press a + / - button to adjust the volume. Press + / - briefly to change the radio station.

In radio mode, Bluetooth® is still in use and the user must press the multifunction key to respond to the incoming calls. "SBS Runner headset" will return to radio mode after the end of the calls.

TF CARD PLAY MODE

From FM radio mode, briefly press the ◀ button to switch to TF

card play mode and you hear "Music player". During playback with the TF card, the green light flashes slowly.

In TF Card Playback Mode: Press and hold + / - to adjust the volume; Press the + / - button briefly to change the songs.

Under TF card playback mode, Bluetooth® is still in use and the user must press the multifunction key to answer the incoming calls. "SBS Runner headset" will return to the TF card playback mode after the end of the calls.

HEADSET CHARGING

The earphone batteries can not be detached and there are rechargeable. Please make sure the headset is fully charged before first using.

1) Press for a few second the On / Off button to turn off the headset (you hear "Power OFF") before charging it. Connect the charger to the micro USB socket (Headset); the indicator light will be red when charging.

2) The indicator light will be off when fully charged. Please take off the charger from the charging socket.

MULTIFUNCTIONAL

PW-ON: press the power button for about 3-5 seconds, the blue LED flashes.

PW-OFF: press the power button for about 3-5 seconds, the LED goes off.

Answering calls: just press answering button (central button).

Hang up: press this key when you want to hang up the call.

Charge time: normally 2 to 3 hours is enough.

SPECIFICATION

Correspond with: Bluetooth® V4.1

Support: HSP, HFP, A2DP, AVRCP

Transmitting Power: Class2

Radius of operation: About 10m

Frequency Range : 2.4026GHz - 2.480GHz

Charge Time: 2 hours

Talk Time: ≥6 hours

Music Time: ≥5 hours

Standby Time: ≥112 hours

TF Card Music Time: ≥8 hours

FM Radio: ≥6 hours

Support FM Radio (87.5-108Mhz)

A. Mode button: Short press this button to switch between: Bluetooth®, TF card music play, FM radio mode.
B. Charging Port.
C. Under Bluetooth® mode, FM radio mode and TF card music play mode, press this button for a long time to reduce the volume. Press briefly to switch to the previous song or the previous radio station.
D. Under the Bluetooth® mode, FM radio mode and TF card music play mode, press this button for a long time to increase the volume. Press briefly to switch to the next song or next radio station.
E. TF card slot.
F. Indicator light.
G. Multifunctional button (Power ON/Power OFF, Answer call/Hang up).
H. Microphone.

I. When there is incoming call, long press this button to reject. Under Bluetooth® and TF card music play mode, short press it for Play/Pause. Under FM radio mode, short press it for enable automatic stations search.

|

ACCOPPIAMENTO BLUETOOTH®

Supporto: HSP, HFP, A2DP, AVRCP

Support: HSP, HFP, A2DP, AVRCP

Radio-FM: 87.5-108 MHz

Support : HSP, HFP, A2DP, AVRCP

Radio FM Support (87.5-108MHz)

" Bluetooth connecting" " Power On "