Shiny BT - Earphones SBS - Free user manual and instructions
Find the device manual for free Shiny BT SBS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Bluetooth Earphones |
| Brand | SBS |
| Model | Shiny BT |
| Connectivity | Bluetooth 5.0 |
| Wireless Range | Up to 10 meters |
| Battery Life (Playback) | Approximately 5 hours |
| Battery Life (Standby) | Up to 100 hours |
| Charging Time | About 1.5 hours |
| Charging Port | Micro USB |
| Driver Unit | 10mm dynamic drivers |
| Impedance | 32 Ohms |
| Frequency Response | 20 Hz - 20 kHz |
| Weight | Approximately 15 grams (pair) |
| Dimensions (Earbud) | 26mm x 22mm x 20mm |
| Water Resistance | IPX4 (splash proof) |
| Controls | Multi-function button for play/pause, calls, volume |
| Microphone | Built-in for hands-free calls |
| Compatibility | iOS, Android, Windows, Mac |
| Included Accessories | Charging cable, silicone ear tips (S/M/L), user manual |
| Cleaning Instructions | Wipe with a soft, dry cloth. Do not use liquids. |
| Storage | Keep in a cool, dry place away from direct sunlight |
| Safety Warning | Do not listen at high volume for extended periods to prevent hearing damage. |
Frequently Asked Questions - Shiny BT SBS
How do I pair my SBS Shiny BT earphones with my phone?
Turn on the earphones by pressing and holding the multi-function button until the LED flashes. Enable Bluetooth on your phone and select Shiny BT from the list. If prompted, enter PIN 0000.
How long does the battery last?
The battery provides approximately 5 hours of playback time and up to 100 hours of standby. Charging takes about 1.5 hours.
Can I use the earphones while charging?
No, it is not recommended to use the earphones while charging as it may affect battery performance and safety.
How do I clean my earphones?
Clean the earphones with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners. Remove ear tips and clean them separately with mild soap and water, then dry thoroughly.
What should I do if one earbud stops working?
First, ensure both earbuds are charged. Reset them by placing both in the charging case, then remove and pair again. If the issue persists, contact SBS support.
Are the earphones water-resistant?
Yes, they have an IPX4 rating which means they are splash-proof. Do not submerge in water.
How do I adjust the volume?
Use the multi-function button: press and hold the + or - side (if available) or your connected device's volume controls.
Can I use the earphones with my laptop?
Yes, the earphones are compatible with any Bluetooth-enabled device such as laptops, tablets, and PCs. Pair them the same way as with a phone.
What is the wireless range?
The effective range is up to 10 meters (33 feet) in open space. Walls and obstacles may reduce range.
How do I reset the earphones to factory settings?
Place both earbuds in the charging case and wait 10 seconds. Then remove them and press and hold the button for 10 seconds until the LED flashes red and blue. Re-pair with your device.
User questions about Shiny BT SBS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Earphones in PDF format for free! Find your manual Shiny BT - SBS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Shiny BT by SBS.
USER MANUAL Shiny BT SBS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SBS
Model : Shiny BT
Category : Earphones