NetBotz NBES0313 - Door sensor APC - Free user manual and instructions

Product Type	NetBotz Rack Access Pod
Model	NBES0313
Brand	APC
Dimensions (H x W x D)	28 mm x 44 mm x 44 mm
Weight	0.2 kg (0.44 lb)
Power Supply	Power over Ethernet (PoE) IEEE 802.3af
Network Interface	10/100 Base-T Ethernet, RJ-45
Supported Protocols	TCP/IP, UDP, SNMP, HTTP, DHCP, DNS, SNTP, SMTP
Sensor Inputs	4 dry contact inputs, 2 universal sensor ports
Operating Temperature	0°C to 50°C (32°F to 122°F)
Operating Humidity	5% to 95% non-condensing
LED Indicators	Power, Network, Alarm
Mounting	Rack or wall mount via included bracket
Included Accessories	Mounting bracket, screws, quick start guide
Certifications	UL, CE, FCC, RoHS
Warranty	2 years

Frequently Asked Questions - NetBotz NBES0313 APC

What is the APC NetBotz NBES0313 used for?

The APC NetBotz NBES0313 is a rack access pod used for monitoring environmental conditions and physical security in server racks. It connects to your network and supports dry contact and universal sensors.

Does the NBES0313 require a separate power supply?

No, it is powered via Power over Ethernet (PoE) using an IEEE 802.3af compliant switch or injector.

Can I connect external sensors to the NBES0313?

Yes, it has 2 universal sensor ports for temperature, humidity, or other APC sensors, and 4 dry contact inputs for door contacts or similar.

How do I access the NBES0313 web interface?

After connecting it to your network and assigning an IP (via DHCP or static), open a web browser and enter the device IP. Login with default credentials (admin/admin) to configure.

Is the NBES0313 compatible with APC NetBotz appliances?

Yes, it is designed to work with APC NetBotz appliances like NBES0300 series. It can also be used standalone with the built-in web interface.

What are the dimensions of the NBES0313?

The dimensions are approximately 28 mm x 44 mm x 44 mm (1.1 in x 1.7 in x 1.7 in), making it compact for rack mounting.

Can the NBES0313 send alerts via email?

Yes, it supports SMTP for email alerts. Configure the SMTP server in the web interface to receive notifications on sensor events.

How do I reset the NBES0313 to factory defaults?

Press and hold the reset button (use a paperclip) on the device for 10 seconds. The LED will blink to indicate a reset.

What is the operating temperature range?

The operating temperature is 0°C to 50°C (32°F to 122°F), and humidity 5% to 95% non-condensing.

Where can I find the user manual for the NBES0313?

The user manual can be downloaded from the APC website or from notice-facile.com in PDF format.

USER MANUAL NetBotz NBES0313 APC

NetBotz ^® Door Switch Sensors for APC ^® Racks (NBES0313)

Installation Instructions

Inventory

Technical line drawing of a cable and connector assembly (no text or symbols)

Switch with connected 1.57-m (62-in) door switch sensor cable

Magnet

M3 hex nut (2)

6-32 x 5/16-in screw (4)

Wire clip (8)

63.5-mm (2.5-in) dual adhesive tape (2)

203-mm (8-in) tie wrap (5)

Adhesive cable tie holder (5) RJ-45 coupling (1)

Installation

Caution: Make sure you connect this sensor to a Sensor port on applicable NetBotz products. See your NetBotz product documentation for details.

Note: You can extend the length of the sensor cable up to 30.5 m (100 ft) using the RJ-45 coupling and standard CAT-5 cabling.

① Front Door of NetShelter® SX Enclosure

② Rear Door of NetShelter SX Enclosure