FMK549 - Car kit American International - Free user manual and instructions

Product Type	Car Audio Installation Kit
Brand	American International
Model	FMK549
Compatibility	Most standard car stereo units
Dimensions	15 x 10 x 5 cm
Weight	200 g
Power Supply	12V DC from vehicle
Main Functions	Wiring harness adapter, dash mounting kit, antenna adapter
Installation	Easy plug-and-play, no soldering required
Maintenance & Cleaning	Wipe with dry cloth, keep away from moisture
Safety	Designed for in-vehicle use, complies with automotive standards
Spare Parts & Repairability	Wiring harnesses and connectors available separately
Warranty	1 year limited warranty
Color	Black plastic with metal connectors
Package Contents	Main harness, mounting brackets, screws, antenna adapter, user manual

Frequently Asked Questions - FMK549 American International

What is the FMK549 car kit used for?

The FMK549 is an installation kit designed to connect an aftermarket car stereo to your vehicle's wiring, dash, and antenna.

Is the FMK549 compatible with my car?

It is compatible with most standard vehicles with ISO connectors; however, check your car's stereo slot size and wiring type before purchase.

What tools are needed for installation?

You typically need screwdrivers, wire strippers, and possibly a socket set for removing the factory stereo.

Does the kit include a user manual?

Yes, a detailed instruction manual is included in the package for step-by-step guidance.

Can I install the FMK549 myself?

Yes, it is designed for DIY installation with basic mechanical skills. Follow the manual carefully.

What should I do if the connectors don't match?

Check your vehicle's harness type; you may need an additional adapter (sold separately) for non-standard wiring.

How do I clean the kit?

Use a dry, soft cloth to wipe the plastic parts. Avoid liquids and abrasive cleaners.

Is the FMK549 covered by warranty?

Yes, it comes with a 1-year limited warranty covering manufacturing defects.

Can I use this kit with a single-DIN radio?

The kit may support both single-DIN and double-DIN installations; check the mounting brackets provided.

Where can I find spare parts for this kit?

Spare wiring harnesses and connectors can be ordered from American International's website or authorized retailers.

USER MANUAL FMK549 American International

Before starting, compare items on your invoice with items received. If any parts are missing, first carefully check through packaging material. If an item is missing, please call:

Crutchfield at 1-888-955-6000

003 FMK549

Ford

Revision 06/09/99

Page 1 of 2

DIN Assembly

1. Using a utility knife, cut out the shaft supports in the receiver mounting bracket to create the DIN opening as shown in Figure 1.
2. Remove DIN sleeve from receiver. Slide DIN sleeve into receiver mounting bracket and secure by bending securing tabs (Figure 2).
   3.Slide receiver fully into sleeve.
3. Secure rear support bracket to rear of receiver as shown using hardware supplied with receiver.
4. Install receiver assembly in dash of vehicle following instructions in the Mastersheet for your vehicle.

Tools Required

Flat Blade Screwdriver

Utility Knife

Rear Support Bracket
Receiver Mounting Bracket

FIGURE 2
FIGURE 1 Shaft Supports

Bend tabs after sleeve is inside mounting bracket.

Mounting Bracket

Receiver Trimplate (for shaft receiver only)

Rear Support Bracket

CRUTCHFIELD®

Copyright 1999 Crutchfield Corporation

Installation Kit

003 FMK549

Ford

Shaft Assembly

1. Choose the correct spacers (supplied with your order) from the shaft spacer tree which will allow receiver nosepiece to extend 1/8" to 1/4" beyond face of receiver mounting bracket (see Inset).
2. Secure receiver, trimplate, and faceplate to receiver mounting bracket using shaftnuts as shown.
3. Secure rear support bracket to rear of receiver using hardware supplied with receiver.
4. Install receiver assembly in dash of vehicle following instructions in the Mastersheet for your vehicle.

Page 2 of 2

CRUTCHFIELD®

Copyright 1999 Crutchfield Corporation