HONK808 - Car kit American International - Free user manual and instructions
Find the device manual for free HONK808 American International in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Audio Wiring Interface Kit |
| Brand | American International |
| Model | HONK808 |
| Compatible Vehicles | Select Honda models (1998-2004) – verify fitment |
| Harness Type | ISO to Honda connector |
| Connectors | 16-pin vehicle side, ISO standard aftermarket side |
| Wire Color Code | Standard aftermarket colors (yellow battery, red ignition, black ground, etc.) |
| Material | PVC-insulated copper wires |
| Cable Length | Approximately 6 inches (15 cm) |
| Weight | 0.2 lbs (90 grams) |
| Power Handling | 10A max per circuit |
| Functions | Connects aftermarket radio to vehicle wiring, retains steering wheel controls (with adapter) |
| Installation | Plug-and-play, soldering not required |
| Tools Required | Wire strippers, electrical tape, panel removal tools |
| Safety | Disconnect negative battery terminal before installation |
| Care and Cleaning | Wipe with dry cloth; avoid moisture |
| Repair and Parts | Contact vendor for replacement; not user-serviceable |
| Package Contents | 1x wiring harness, 1x instruction sheet |
| Warranty | 1 year limited |
Frequently Asked Questions - HONK808 American International
What vehicles is the American International HONK808 compatible with?
The HONK808 is designed for select Honda models from 1998 to 2004, such as Accord, Civic, CR-V, and Odyssey. Always verify with a fitment guide before purchase.
Does this harness support steering wheel controls?
No, this harness does not retain steering wheel controls by itself. You need an additional ASWC-1 or similar adapter.
Is the harness plug-and-play?
Yes, it connects directly between the vehicle wiring and an aftermarket radio without soldering. However, you may need to trim the ISO connector for some radios.
What wire colors are used?
Standard aftermarket colors: yellow (battery 12V), red (ignition 12V), black (ground), blue (power antenna), orange (dimmer), and speaker wires (gray, white, green, purple pairs).
Can I use this harness with a double DIN radio?
Yes, the harness works with any aftermarket radio that has an ISO connector. The double DIN form factor does not affect wiring.
How do I install the harness?
Disconnect the battery. Connect the harness to the vehicle's factory plug, then connect the aftermarket radio to the harness. Secure connections with tape or crimp caps.
What is the maximum current rating?
Each circuit is rated for 10 amps maximum. Higher current may damage the wire insulation.
Does this kit include instructions?
Yes, a paper instruction sheet is included. You can also download a PDF from the manufacturer's website.
Is the harness compatible with amplified systems?
It works with standard speaker systems. For factory amplified systems, you may need an additional adapter to bypass or integrate with the amplifier.
What tools do I need for installation?
You will need a panel removal tool, wire strippers, electrical tape or crimp connectors, and a multimeter to verify connections.
User questions about HONK808 American International
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Car kit in PDF format for free! Find your manual HONK808 - American International and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HONK808 by American International.
USER MANUAL HONK808 American International
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : American International
Model : HONK808
Category : Car kit