DM-X6 - Lighting Qtx - Free user manual and instructions
Find the device manual for free DM-X6 Qtx in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | DMX-controlled LED lighting fixture |
| Model | DM-X6 |
| Brand | Qtx |
| Light Source | 6 x high-power LEDs (RGBW or similar) |
| DMX Channels | 6 to 10 channels (selectable) |
| DMX Modes | Multi-channel mode, master/slave, auto, sound-active |
| Beam Angle | 25° (lens dependent) |
| Strobe Rate | 0-20 Hz |
| Dimmer | 0-100% smooth electronic dimming |
| Power Supply | AC 100-240V, 50/60Hz (via included power cord) |
| Power Consumption | Approx. 60W |
| Dimensions (W x D x H) | 245 x 200 x 180 mm |
| Weight | 2.5 kg |
| Cooling | Passive convection with heatsink |
| Housing | Metal and flame-retardant plastic |
| Mounting | Floor stand or truss clamp (bracket included) |
| Display | LED digital display with menu buttons |
| Maintenance | Wipe with dry cloth; no internal user-serviceable parts |
| Safety | Class I, CE certified |
| Spare Parts | Contact Qtx or authorized dealer for replacement LEDs or power supply |
| General Information | Suitable for stage, DJ, mobile entertainment, and architectural lighting |
Frequently Asked Questions - DM-X6 Qtx
How do I connect the DM-X6 to a DMX controller?
Use a standard 3-pin DMX cable. Connect the DMX OUT of your controller to the DMX IN of the fixture. Set the fixture's DMX address via the menu. Ensure the cable is terminated if it's the last fixture in the chain.
What are the available DMX channel modes?
The DM-X6 typically offers 6, 8, or 10-channel modes. Refer to the user manual for the exact channel assignment. Use the menu to select the desired mode.
Can I use the DM-X6 in sound-active mode?
Yes, the fixture has a built-in microphone for sound activation. Set the mode to 'Sound Active' via the menu. Adjust the sensitivity if needed.
How do I clean the DM-X6?
Disconnect power. Use a soft, dry cloth to wipe the housing and lens. Do not use liquids or abrasive cleaners. Clean the vents regularly to prevent overheating.
What power supply does the DM-X6 require?
It operates on AC 100-240V, 50/60Hz. Use only the supplied power cord. Do not modify or use a different voltage without proper conversion.
What should I do if the DM-X6 does not respond to DMX?
Check the DMX cable connection and ensure the controller is on. Verify the DMX address matches the controller's output. Test with a known working fixture. If still not working, the DMX board may need replacement.
How do I replace a faulty LED?
LED replacement should be done by a qualified technician. Contact Qtx support or an authorized service center. Do not attempt to open the fixture yourself as it may void warranty.
Is the DM-X6 suitable for outdoor use?
No, the DM-X6 is designed for indoor use only. Exposure to moisture, rain, or extreme temperatures can damage the fixture.
Can I mount the DM-X6 on a truss?
Yes, the fixture comes with a mounting bracket that fits standard truss clamps. Ensure the clamp is rated for the weight (2.5 kg) and securely attached.
What does the 'Master/Slave' mode do?
In Master/Slave mode, one DM-X6 acts as the master and controls others (slaves) via DMX cable without an external controller. Set one to 'Master' and others to 'Slave' in the menu.
User questions about DM-X6 Qtx
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual DM-X6 - Qtx and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DM-X6 by Qtx.