HIPAR-100 - Lighting Qtx - Free user manual and instructions
Find the device manual for free HIPAR-100 Qtx in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED PAR Can |
| Model | HIPAR-100 |
| Brand | Qtx |
| Light Source | 100W RGB LED |
| Beam Angle | 25° |
| DMX Channels | 3/7/10 selectable |
| Control Modes | DMX512, Auto, Sound, Master/Slave |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 120W max |
| Dimensions (W x D x H) | 250 x 200 x 150 mm |
| Weight | 1.5 kg |
| Housing Material | Aluminum |
| Cooling | Fan-cooled |
| IP Rating | IP20 (indoor use only) |
| Mounting | Bracket with mounting holes |
| Accessories Included | Power cord, DMX cable, mounting bracket |
| Maintenance | Clean with a dry, soft cloth. Do not use liquids or solvents. |
| Safety | Operate only in dry locations. Disconnect power before cleaning. Use correct voltage. |
| Serviceable Parts | LED module and fan are replaceable. Contact qualified technician for repairs. |
| General Information | Professional lighting fixture for stages, DJ setups, and events. User manual available in PDF. |
Frequently Asked Questions - HIPAR-100 Qtx
How do I connect the HIPAR-100 to a DMX controller?
Use a standard 3-pin XLR cable to connect the DMX IN port of the fixture to the DMX OUT port of your controller. Set the DMX address using the DIP switches or menu on the fixture. Ensure proper termination if at the end of the chain.
What DMX address should I set?
The DMX address depends on the number of channels used. For example, if using 3-channel mode, set address 1 for the first fixture. Always refer to the DMX channel chart in the manual.
How do I reset the fixture to factory defaults?
Press and hold the Menu button for 5 seconds until the display shows 'Reset'. Confirm by pressing Enter. Alternatively, disconnect power for 10 seconds.
The light does not turn on, what should I check?
First, verify the power cable is connected and the outlet is live. Check the power switch on the fixture. If using DMX, ensure the controller is sending data. Test in standalone sound-activated mode to isolate the issue.
Can I use the HIPAR-100 outdoors?
No, this fixture is rated IP20 for indoor use only. Exposure to rain, snow, or moisture can cause electrical shock or damage.
How do I clean the lens?
Use a soft, lint-free cloth slightly dampened with water. Do not use alcohol, ammonia, or abrasive cleaners. Clean gently to avoid scratches.
What type of controller is compatible?
Any DMX512 controller is compatible. Popular options include the Velleman DMX2USB, Enttec USB Pro, or lighting consoles like Chamsys or QLC+. It also works with our Qtx DMX controllers.
How do I set the fixture to sound activation?
Press the Mode button until 'SND' appears on the display. Use the built-in microphone to trigger color changes or strobe according to music volume.
What is the lifespan of the LEDs?
The rated LED lifespan is approximately 50,000 hours. If a single LED fails, the entire module may need replacement by a qualified technician.
Can I mount the fixture on a truss?
Yes, use the included mounting bracket to hang the fixture from a truss or stand. Ensure the load capacity of your support exceeds 1.5 kg. Always use a safety cable as a secondary attachment.
User questions about HIPAR-100 Qtx
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual HIPAR-100 - Qtx and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HIPAR-100 by Qtx.