SC15830N - Vacuum Cleaner SWAN - Free user manual and instructions

Product Type	Upright Vacuum Cleaner
Brand	Swan
Model	SC15830N
Dust Tank Capacity	2 litres
Motor Power	400 Watts
Energy Class	A++
Sound Level	80 dBA
Net Weight	4.1 kg
Power Cord Length	6.5 metres
Filtration	Washable foam filter and cover filter
Bagless	Yes
Accessories Included	3-in-1 crevice tool, 2m hose
Optional Accessories	Turbo Pet Tool (for SC15832N/SC15834N)
Brush Roll	Yes, with drive belt
Overheat Protection	Yes - motor shuts off if clogged
Child Safety	Not for children under 8 without supervision
Voltage	220-240V
Frequency	50/60 Hz
Max Power Input	400W
Warranty	2 years (UK and Eire)
Disposal	WEEE recycling required
Maintenance	Regular filter cleaning, brush roll cleaning, belt replacement
Spare Parts Available	Filters, brush roll, drive belt, hose, pet tool

Frequently Asked Questions - SC15830N SWAN

How do I assemble the vacuum cleaner?

First, remove the dust tank. Insert the handle into the vacuum body and secure with the screw. Replace the dust tank until it clicks. Connect the handle hose to the connector hose, then insert the handle into the other hose on the body. Finally, insert the 3-in-1 tool into the onboard storage.

How do I empty the dust tank?

Press the dust tank release button to remove the tank. Hold it over a rubbish bin and unclip the bottom lock to empty. Close the base, align the tank back onto the machine, and push until it clicks. For best performance, empty when debris reaches the MAX FILL line.

How often should I clean the filters?

Wipe the filter cover with a cloth over a bin regularly. Wash the foam filter with water every 3 months. Allow at least 24 hours for the filter to dry completely before reinstalling. Never operate without filters or with a damp filter.

What should I do if the vacuum cleaner stops working?

If the motor shuts off, it may have overheated due to a clog. Unplug the vacuum, clean the filters, and check the hoses and dust tank for blockages. Allow 3-4 hours for the unit to cool down before resuming use. Also check the plug fuse and circuit breaker.

Can I use the vacuum cleaner on stairs?

Yes, but position it as shown in the manual. Avoid letting the brush roll touch the edge of the stair carpet to prevent damage. Do not pull on the hose. Always keep the area well lit.

How do I clean the brush roll?

Turn off and unplug the vacuum. Place it upside down with the brush roll facing up. Remove the six screws on the brush cover with a Phillips screwdriver. Lift off the cover, remove the brush roll, and cut away any hair or string with scissors. Clean debris from the brush ends and motor pulley.

How do I replace the drive belt?

Switch off and unplug the vacuum. Remove the brush roll cover and brush roll. Take off the old belt from the motor shaft. Loop the new belt over the motor shaft and stretch the other end over the brush roll in the space between bristles. Replace the brush roll, turn it by hand to align the belt, then replace the cover and screws.

What accessories are included with the SC15830N?

The SC15830N comes with a 3-in-1 crevice tool and a 2 metre hose. The Turbo Pet Tool is available on models SC15832N and SC15834N.

Is the vacuum safe for pets?

The Turbo Pet Tool is designed for vacuuming pet hair from carpets and upholstery, but do not use it directly on animals. Always keep pets away from the vacuum when in use.

How do I dispose of the appliance?

Do not dispose of it with household waste. Follow local regulations for WEEE recycling. Visit www.recycle-more.co.uk or www.recyclenow.co.uk for UK recycling points, or www.weeeireland.ie for Ireland.

USER MANUAL SC15830N SWAN

Follow caution information wherever you see this symbol.

When using an electrical appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER

Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

WARNING

This vacuum cleaner is intended for household use only and NOT for commercial or industrial use.

• Only use the vacuum cleaner indoors on dry surfaces and keep the area you're cleaning well lit.
• Keep fingers, hair and loose clothing away from moving parts and openings whilst using the vacuum cleaner.
• Use only Eureka | Swan recommended tools and accessories with this vacuum cleaner.
• Don't use the vacuum cleaner if it has been dropped, damaged or left outdoors.
• Don't run over the power cord or use the vacuum cleaner if the power cord or plug is damaged.
• Don't handle the plug or use the vacuum cleaner with wet hands.
• Don't pull or carry the vacuum cleaner by the power cord.
• Don't use the power cord as a handle, pull the power cord around corners, sharp edges or close a door over the power cord.
• Don't unplug vacuum cleaner by pulling on the power cord.
• Turn off all controls on the vacuum cleaner before disconnecting or connecting the power cord.
  • Always make sure the filters are in place before use.
• Always switch off the vacuum cleaner before disconnecting or connecting the hose and accessories.
• Keep all openings clear and free from debris as this may affect the air flow/suction.
  • Always replace the fuse in the plug with a British 13 amp fuse.

eureka | Swan

IMPORTANT SAFEGUARDS

• Always protect the power cable from heated surfaces and open flames.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the vacuum cleaner in a safe way and understand the hazards involved. Children shall not play with the vacuum cleaner. Cleaning and user maintenance shall not be made by children without supervision.
• Don't vacuum up any flammable or combustible materials (lighter fluid, petrol, kerosene etc.) or use the vacuum cleaner in an area with explosive vapours or liquid.
• Don't vacuum up hot coals, cigarette butts, matches or smoking hot, burning items or use in an area where there may be harmful fluids (chlorine, bleach, and ammonia drain cleaner).
• Don't attempt to remove blockages with sharp objects as this may cause damage to the vacuum cleaner.
• Don't vacuum up hard or sharp objects such as glass, nails, screws or coins etc.
• Don't use the vacuum cleaner with incorrect voltage as this may result in damage or injury to the user. The correct voltage is listed on the rating label.
• Take extra care when positioning and using the vacuum cleaner on the stairs.
• Use only CE marked 13 amp extension cords, non-approved extension cords may overheat. Care should be taken to arrange the extension cord as it can be a trip hazard.
• Store the vacuum cleaner in a cool, dry area. If filters have been cleaned as per user guide instructions ensure they are thoroughly dry before storing away.

Please keep instructions for future reference

eureka | Swan

UNPACKING

Carefully unpack and inspect your new Eureka | Swan vacuum cleaner for shipping damage.

Each unit is tested and thoroughly inspected before shipping. For instructions regarding any shipping damage, call the Eureka | Swan Customer Service HELPLINE at 0333 220 6050 immediately.

Make sure your vacuum cleaner is switched off and unplugged when cleaning, removing or refitting parts.

eureka | Swan

PARTS

1. Handle
2. Dust tank release
3. Dust tank
4. Handle hose
5. Power on/off
6. Nozzle

7. Air outlet

8. Wheel

9. Connecting hose
10. 3-in-1 crevice tool accessory
11. Power cord
12. Power cord wrap
13. Turbo Pet Tool accessory SC15832N, SC15834N only

The pet hair cleaning tool (13) is for use when vacuuming pet hair and/or ground-in debris from carpeted or upholstery surfaces.

WARNING

Injury to pets. Do not use pet hair cleaning tool directly on animals.

5

eureka

Swan

eureka

Swan

GET TO KNOW YOUR VACUUM

WARNING:

DO NOT plug in your vacuum cleaner until you have completely assembled it per the following instructions and are familiar with all instructions and operation procedures.

Remove the dust tank before installing handle. Insert the handle into the vacuum body, then rotate the screw into body as shown. IMPORTANT: The handle must be inserted first before replacing dust tank

Place the dust tank back onto the machine and push until it clicks into place.

Diagram of a vacuum cleaner with attached tubing and directional arrows indicating assembly or operation (no text or symbols present)

Insert the handle hose end into the conector hose and rotate clockwise to join. Then insert the handle into the other hose of the body.

Technical line drawing of a vacuum cleaner's base with hoses and a valve, showing no text or symbols

Insert the 3-in-1 crevice tool accessory into the on-board storage reservoir, as shown.

eureka | Swan

eureka | Swan

OPERATION

Technical line drawing of a vacuum cleaner with coiled hose and valve mechanism (no text or symbols)

Twist the quick release cord hook to release the power cord.

Step on the brush cover and pull back on handle, to engage for operation.

Line drawing of a robotic lawn mower with a downward arrow indicating motion (no text or symbols)

Plug in your machine and push ON/OFF button to switch ON/OFF.

Line drawing of a vacuum cleaner with attached circuit board (no text or symbols)

To maintain optimal performance, please empty dust tank when debris reaches MAX FILL line.

eureka | Swan

eureka

Swan

OPERATION

When using on steps:

Position as shown below. Do not allow the brush roll to come into contact with edge of the stair carpet or damage could occur.

Do not pull on the hose.

8

eureka | Swan

eureka

Swan

USING ACCESSORIES

3-in-1 Crevice Tool Accessory

1

2

Technical line drawing of two mechanical tools or cutting devices (no text or symbols)

The 3-in-1 crevice tool with brush allows for vacuuming in narrow and hard-to-reach places.

Turbo Pet Tool

SC15832N, SC15834N models only

For vacuuming pet hair from surfaces

Technical illustration of a mechanical component with no visible text or symbols

Technical diagram of a vacuum cleaner's internal structure showing hoses and components (no text or labels)

Remove hose handle and 3-in-1 crevice tool from the machine

Illustration of a cylindrical pipe with a flanged end (no text or symbols)

The handle hose can be used immediately.

Technical line drawing of two electrical connectors (no text or symbols)

At the same time, you can insert the 3-in-1 crevice tool/turbo pet tool into the hose handle to extend the distance.

eureka | Swan

MAINTENANCE

⚠ WARNING: Turn off and unplug vacuum cleaner before performing maintenance to the vacuum cleaner.

Emptying and cleaning the dust tank

Technical line drawing of a mechanical device with arrows indicating motion or assembly (no text or symbols)

Press dust tank release button to remove the dust tank.

Line drawing of hands using a portable device to adjust or install a cylindrical component (no text or symbols)

Hold dust tank over rubbish bin and unclip the lock on the bottom of the tank, allowing the dust to empty.

Illustration of a hand holding a cylindrical mechanical component with a circular base, next to a small bowl (no text or symbols)

Close the base of the dust tank, align the tank base back onto the machine and push until it clicks back into place.

WARNING

If the filter or hose is clogged, the motor may shut down in order to protect itself from overheating. If this occurs, unplug the vacuum, clean the filter and inspect the hoses and canister for clogging. Allow 3-4 hours for the unit to fully cool down before resuming use.

Mechanical assembly diagram showing a gear and shaft assembly with no visible text or symbols

Inspect the lower tube and nozzle and remove the dirt and debris.

eureka

Swan

MAINTENANCE

⚠ WARNING: Turn off and unplug vacuum cleaner before performing maintenance to the vacuum cleaner.

Technical line drawing of a mechanical component with a meshed top and directional arrows indicating movement (no text or symbols)

Locate and unlock filter cover as shown.

Push left to un-lock, right to lock

Remove filter cover with filter. Wipe with cloth over rubbish bin, removing dirt and debris.

Simple line drawing of a faucet with water spray, no text or symbols present

Wash with water every 3 months, allow at least 24 hours to dry and make sure it is dry thoroughly before re-using

DUST TANK

Technical line drawing of a mechanical device with internal components and directional arrows (no text or symbols)

1. Remove the dust tank.

Line drawing of hands operating a cylindrical device with a handle (no text or symbols)

1. Push the release button, open the dust tank and clean all parts of the dust tank

Illustration of a hand inserting a plug into a device with an arrow indicating the insertion (no text or symbols present)

1. Open the dust tank filter lid located on top of the tank

Diagram showing hands assembling a mechanical component with an arrow indicating assembly (no text or symbols present)

1. Remove the dust tank foam filter.

eureka | Swan

MAINTENANCE

Illustration of a hand holding a faucet spraying water onto a small object (no text or symbols)

1. Hand wash the foam filter..

Illustration of a hand placing a circular object onto a cylindrical container (no text or symbols)

1. Allow filter to dry before putting back info vacuum cleaner

Diagram of a mechanical press or valve mechanism with rotating arrows indicating motion (no text or symbols)

1. Twist filter assembly anti-clockwise to remove for cleaning dirt and debris as needed.

DO NOT operate without filter installed

DO NOT wash dust tank in the dish washer

DO NOT install filter if it is damp

⚠️ CAUTION:

Do not turn the appliance on when the dust tank is removed. In order to keep the suction force optimised, the dust tank and filters must be cleaned regularly.

⚠ WARNING: Turn off and unplug vacuum cleaner before performing maintenance to the vacuum cleaner.

Technical line drawing of a mechanical assembly with no visible text or symbols

CLEANING BRUSH ROLL

Carefully remove any string, hair or debris located on the brush roll.

You can use a tool such as a small knife or scissors to remove and cut any hair or string.

eureka | Swan

MAINTENANCE

Pet Tool (SC15832N, SC15834N only)

1. To release the pet tool plastic upper cap for internal cleaning, roatate, unlock and remove the plastic locking ring as shown.

Illustration of a person using a medical pressure monitor to adjust the cup (no text or symbols visible)

1. Pull up on the plastic upper cap of the pet tool as shown.

Exploded view diagram of a mechanical device showing internal components and a separate ring (no text or labels)

1. Remove plastic upper cap and clean, removing pet hair and debris.

2. Do not clean the vacuum cleaner, components or accessories using petrol or any other flammable liquid or solvents, etc.

3. Clean only the outside of the vacuum cleaner.
4. Use only a moist cloth and mild detergent for cleaning the vacuum cleaner, components and accessories.
   • After cleaning, wipe off the moisture on vacuum cleaner, components and accessories with a dry cloth.
5. Do Not place accessories, tools or components in a dishwasher.

Bush Roll

You should check your cleaner's brush roll and drive belt regularly for wear or damage.

You should also clean the brush and brush ends by removing string, hair and carpet fibres.

These can wrap around the brush and hamper its ability to effectively clean your carpet. Also remove any debris that has accumulated under the brush cover.

1. Turn off vacuum and unplug from electrical outlet.
2. Place vacuum upside down with brush roll facing upwards.
3. Remove the six screws as shown with a small Phillips screwdriver (see images below).
4. Lift off brush cover.
5. Grasp floor brush at both ends and remove by lifting out.
6. Clean string, hair and other debris from floor brush, motor pulley, and drive belt.
7. Check floor brush for worn areas and replace if needed.
8. Check air passageway for obstructions. Remove debris from this area.
9. When finished cleaning, reposition floor brush and drive belt. Then replace the brush cover and re-install the six screws.
10. Turn floor brush by hand several times in the direction of the motor pulley. If properly installed, the drive belt will align itself on floor brush.

eureka | Swan

MAINTENANCE

Technical line drawing of a mechanical assembly with no visible text or symbols

Illustration of a robotic arm with arrows indicating movement or force (no text or symbols present)

Illustration of hands holding a mechanical component with gear-like teeth (no text or symbols)

Diagram of a lawn mower with hand operating the blade (no text or labels)

Replacing The Drive Belt

Make sure the vacuum is switched off and unplugged first

Check the drive belt carefully for wear, cuts and stressed areas. If the drive belt appears worn, you will need to replace it. To remove the drive belt, read the instructions and follow the drawings below:

1. Grasp the old drive belt and remove from motor shaft. Discard old drive belt.
2. Loop new drive belt over motor shaft and stretch other end over floor brush in the space provided between the bristles.
3. Place ends of floor brush down into slots on sides as shown.
4. Turn floor brush by hand several times in the direction of the motor shaft.
5. If properly installed, drive belt will align itself on floor brush.
6. Replace brush cover and six screws.

eureka | Swan

MAINTENANCE

Illustration of hands operating a mechanical device with a tool, no visible text or symbols

Illustration of hands operating a mechanical device with tool, no text or symbols visible

Technical diagram of a robotic car interior showing gear and wheel components, with a hand adjusting the base (no text or symbols present)

eureka | Swan

TROUBLESHOOTING

Vacuum cleaner won’t run Remedies
1. Vacuum cleaner not plugged in2. Blown fuse/tripped breaker	1. Check plug/socket2. Check fuse/breaker
Vacuum won’t puck up dirt Remedies
1. Dust tank full2. Filter is dirty3. Hose not secure4. Dust tank not in place5. Vacuum path blocked	1. Empty dust tank2. Check/remove debris or clean3. Check hose is properly fitted4. Make sure dust tank is fully inserted and release handle is fully pushed in5. Visually check air passageway, hose inlet and hose for anything that might be obstructing the vacuum path. Remove blockage

eureka | Swan

DISPOSAL

Appliances bearing the symbol shown here may not be disposed of in domestic rubbish. You are required to dispose of old electrical and electronic appliances like this separately. Please visit www.recycle-more.co.uk or www.recyclenow.co.uk for access to information about the recycling of electrical items. Please visit www.weeeireland.ie for access to information about the recycling of electrical items purchased in Ireland. The WEEE directive, introduced in

August 2006, states that all electrical items must be recycled, rather than taken to landfill. Please arrange to take this appliance to your local Civic Amenity site for recycling, once it has reached the end of its life.

eureka | Swan

TECHNICAL DATA

SC15830N

Performance

• Dust tank capacity: 2 Litres
• Energy class: A ++/D/E/E
• Motor power: 400 Watts
• Sound level: 80dBA

Accessories

• 1 x 3 in 1 brush
• 1 x 2m hose

Weight & Dimensions

• Net weight: 4.1kg
  • Power cord length: 6.5 Metres
  •

SC15834N

Performance

• Dust tank capacity: 2 Litres
• Energy class: A++/D/E/E
• Motor power: 400 Watts
• Sound level: 80dBA

Accessories

• 1 x Pet tool
• 1 x 3 in 1 brush
• 1 x 3m hose

Weight & Dimensions

• Net weight: 4.1kg
  • Power cord length: 9.3 Metres

SC15832N

Performance

• Dust tank capacity: 2 Litres
• Energy class: A ++/D/E/E
• Motor power: 400 Watts
• Sound level: 80dBA

Accessories

• 1 x Pet tool
• 1 x 3 in 1 brush
• 1 x 2m hose

Weight & Dimensions

• Net weight: 4.1 kg
  • Power cord length: 6.5 Metres

16

eureka | Swan

eureka | Swan

SPARES

www.eureka-swan.co.uk

1. SC15834N-01 3-in-1 tool

Simple line drawing of a U-shaped pipe with a handle and flange (no text or symbols)

1. SC15834N-02 2 Metre Hose

1. SC15834N-03 Brush roll

1. SC15834N-04 Pet tool

1. SC15834N-05 Cover filter

Illustration of a hand gripping a circular object (no text or symbols)

1. SC15843N-06 Foam filter

17

eureka | Swan

eureka | Swan

WARRANTY

This product is guaranteed for 2 years from the date of original purchase. If any defect arises due to faulty materials of workmanship the faulty products must be returned to the place of purchase. Refunds or replacement is at the discretion of the store.

The following conditions apply:

• The product must be returned to the retailer with proof of purchase.
• The product must be installed and used in accordance with the instructions contained in this instruction guide.
• It must be used only for domestic purposes.
• It does not cover wear and tear, damage, misuse or consumable parts.
• Swan Products Ltd has limited liability for incidental or consequential loss or damage.
• This guarantee is valid in the UK and Eire Only.

eureka

Swan

NOTES

19

eureka | Swan

Stylized white and gray swan logo design on black background (no text or symbols)

www.eureka-swan.co.uk

Scan this QR code to hear about our story

We love what we do

we're proud of our quality

Find us on Facebook

* on selected products

Copyright © Swan Products Ltd. PO Box 3117, Stoke-on-Trent ST4 9GD