SmartWater GG30T06AVF - Water heater GE - Free user manual and instructions
Find the device manual for free SmartWater GG30T06AVF GE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Residential Electric Water Heater |
| Brand | GE |
| Model | SmartWater GG30T06AVF |
| Capacity | 30 Gallons |
| Power Source | Electric (240V, 60Hz) |
| Wattage | 4500 Watts (dual elements) |
| Height | 48.5 inches |
| Width/Depth | 22.5 inches (diameter) |
| Weight (Empty) | 125 lbs |
| Energy Factor | 0.95 |
| First Hour Rating | 48 Gallons |
| Temperature Range | 90°F - 150°F (adjustable) |
| Safety Features | T&P Relief Valve, Automatic Shutoff, Thermal Cutoff |
| Materials | Glass-Lined Steel Tank, Magnesium Anode Rod |
| Insulation | 2-inch Foam Insulation (R-Value 25) |
| Connection Size | 3/4 inch NPT (water in/out) |
| Recovery Rate at 90°F Rise | 26 GPH |
| Controller | SmartWater Electronic Thermostat with LED Indicators |
| Warranty | 6 Year Limited Tank and Parts Warranty |
| Maintenance | Annual Flushing, Anode Rod Inspection Every 2 Years |
| Installation | Indoor Only, Floor Mounted, Min. 18" Ceiling Clearance |
Frequently Asked Questions - SmartWater GG30T06AVF GE
What is the capacity of the GE SmartWater GG30T06AVF water heater?
It has a 30-gallon capacity, ideal for small households (1-3 people).
How do I adjust the temperature setting?
Locate the thermostat dial behind the lower access panel. Use a screwdriver to adjust between 90°F and 150°F. Factory setting is 120°F.
Why is my water heater not producing hot water?
Check the circuit breaker, reset button (if tripped), and thermostat setting. If still no hot water, the heating element may be faulty.
How often should I flush the water heater?
Flush at least once a year to remove sediment. Connect a hose to the drain valve, turn off power/cold water, and drain until clear.
What is the first hour rating (FHR)?
The FHR is 48 gallons for this model, meaning it can supply 48 gallons of hot water in the first hour of use.
How do I replace the anode rod?
Turn off power and water supply. Drain a few gallons. Use a 1-1/16 inch socket to remove the hex head anode rod on top. Replace with a new magnesium or aluminum rod.
What does the red reset button do?
The reset button (usually near the thermostat) trips if the water overheats. To reset, press firmly until it clicks. If it trips repeatedly, call a professional.
Is the water heater suitable for outdoor installation?
No, this model is designed for indoor use only. Install in a dry, ventilated area with protection from freezing.
What is the warranty period?
GE offers a 6-year limited warranty on the tank and parts. Proof of purchase is required for claims.
Can I install the water heater myself?
While possible, it is recommended to hire a licensed plumber. The installation must comply with local codes and safety standards.
User questions about SmartWater GG30T06AVF GE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual SmartWater GG30T06AVF - GE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SmartWater GG30T06AVF by GE.