GG40S06TVT - Water heater GE - Free user manual and instructions
Find the device manual for free GG40S06TVT GE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Gas Water Heater |
| Brand | GE |
| Model | GG40S06TVT |
| Capacity | 40 Gallons (151 Liters) |
| Fuel Type | Natural Gas / Propane |
| BTU Rating | 38,000 BTU/hr |
| Recovery Rate | 40 Gallons per hour at 90°F rise |
| Energy Factor | 0.63 (Estimated) |
| Warranty | 6 Years (Tank and Parts) |
| Dimensions (H x W x D) | 48.5 x 20.5 x 20.5 inches |
| Weight (Empty) | 120 lbs (54 kg) |
| Voltage | 120V (Pilot and Controls) |
| Anode Rod | Powered anode rod for corrosion protection |
| Safety Features | Flammable vapor sensor, T&P relief valve, temperature limit switch |
| Maintenance | Annual flushing, inspect anode rod, test T&P valve |
| Spare Parts Availability | Common parts available, model specific kit |
| Repairability | DIY-friendly for basic maintenance, professional service recommended for gas components |
Frequently Asked Questions - GG40S06TVT GE
What is the capacity of the GE GG40S06TVT water heater?
The GE GG40S06TVT has a 40 gallon capacity, suitable for households with 3-4 people.
How do I set the temperature on my water heater?
Locate the temperature dial on the gas valve. Use a flathead screwdriver to adjust to desired setting, typically 120°F for safety and efficiency. Allow 24 hours for temperature to stabilize.
What does the 'GG40S06TVT' model number mean?
GG indicates gas, 40 is 40 gallons, S stands for standard, 06 is 6-year warranty, and TVT is a GE model code.
How often should I flush my water heater?
Manufacturer recommends annual flushing to remove sediment buildup. Turn off gas and water, drain tank, then refill and relight pilot.
Why is my pilot light not staying lit?
Common causes: a dirty thermocouple, faulty gas valve, or insufficient draft. Clean the thermocouple with emery cloth. If issue persists, call a professional.
What safety features does this model have?
The GG40S06TVT includes a flammable vapor sensor, temperature and pressure relief valve, and a high-temperature limit switch.
Can I install this water heater in a garage?
Yes, but it must be elevated at least 18 inches above the floor to avoid flammable vapors. Check local codes.
How do I replace the anode rod?
Turn off water and gas, drain a few gallons, unscrew old rod with a 1-1/16 inch socket, install new rod with Teflon tape, and refill.
What is the BTU input for this model?
The GG40S06TVT has an input of 38,000 BTU/hr for fast recovery.
Where can I find replacement parts?
Parts like anode rods, T&P valves, and thermocouples are available online or at hardware stores. Use model number GG40S06TVT for exact fit.
User questions about GG40S06TVT GE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual GG40S06TVT - GE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GG40S06TVT by GE.