AEG

T7DBK841N - Tumble drier AEG - Free user manual and instructions

Find the device manual for free T7DBK841N AEG in PDF.

📄 32 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice AEG T7DBK841N - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Tumble Dryer (Heat Pump)
Brand AEG
Model T7DBK841N
Energy Efficiency Class A++
Capacity 8 kg
Dimensions (H x W x D) 85 x 60 x 65 cm
Weight 50 kg
Power Supply 230 V / 10 A
Drying Technology Heat Pump with Self-Cleaning Condenser
Drying Programs Cottons, Synthetics, Delicates, Wool, Outdoor, Mix, Quick 30 min, Time Dry
Sensor Drying Yes, with AutoDry and OptiSense
Anti-Crease Function Up to 120 minutes
Child Lock Yes
Noise Level 65 dB (A)
Condenser Cleaning Self-cleaning with indicator
Water Tank Direct drain or tank (5 L)
Filter Lint filter in door
Heat Pump Maintenance Accessible for cleaning
Reparability Replacement parts: heat pump, belt, door seal, control board
Safety Features Overheating protection, door lock, anti-flood system
Warranty 2 years standard

Frequently Asked Questions - T7DBK841N AEG

How do I clean the condenser on the AEG T7DBK841N?
The heat pump condenser is self-cleaning, but you should inspect it periodically. Remove the front plinth, unlock the condenser cover, and rinse with water if needed. Refer to manual section 5.2.
What is the maximum load capacity of this dryer?
The maximum capacity is 8 kg for cotton fabrics. For synthetics and delicates, reduce to 4 kg and 2 kg respectively.
Why does the drying cycle take longer than expected?
Check the lint filter and condenser for blockages. Also ensure the room temperature is above 5°C and the load is not too wet (spin at 1200 rpm or more).
How do I activate the child lock?
Press and hold the Child Lock button (usually with a padlock icon) for 3 seconds until the indicator lights up. Deactivate similarly.
Can I install the dryer stacked on a washing machine?
Yes, but you need the stacking kit specifically designed for AEG. Ensure the washing machine is of the same width (60 cm) and can support the weight.
What does error code E20 mean?
Error E20 indicates a water drainage issue. Check the water tank (if used) or the drain hose for kinks or blockages. Clean the filter and condenser as well.
How often should I clean the heat pump?
Every 6 months or after about 100 drying cycles. Use a vacuum or soft brush to remove dust from the heat pump fins. Do not use water unless specified.
Where can I find spare parts for the T7DBK841N?
Spare parts like door seal, heating element, belt, and control board are available from AEG authorized service centers or online spare parts retailers.
Does this dryer have a reversible door?
Yes, the door is reversible. Instructions are in the manual. You will need to unscrew hinges and reposition the door latch and handle.
What is the energy consumption per cycle?
Approximately 1.95 kWh for a full cotton load at rated capacity. This corresponds to energy class A++.

User questions about T7DBK841N AEG

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Tumble drier in PDF format for free! Find your manual T7DBK841N - AEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. T7DBK841N by AEG.

USER MANUAL T7DBK841N AEG

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : AEG

Model : T7DBK841N

Category : Tumble drier