TS-90B - Speaker Stand Ultimate Support - Free user manual and instructions

Product Type	Speaker Stand
Brand	Ultimate Support
Model	TS-90B
Material	Steel
Height Range	3 to 6 ft (adjustable)
Weight Capacity	100 lbs (45 kg)
Base Diameter	24 inches (61 cm)
Weight	12 lbs (5.5 kg)
Color	Black
Foldable	Yes
Adjustment Mechanism	Collar with locking pin
Included Accessories	Carrying bag
Use	Professional audio, PA systems
Assembly Required	Yes – simple 2-step assembly
Safety Features	Non-slip rubber feet, safety locking pin
Compatible With	Most speakers with standard 1 3/8" pole mount
Warranty	2 years limited
Country of Origin	China
Packing Dimensions	40 x 6 x 6 inches
Package Weight	14 lbs (6.4 kg)

Frequently Asked Questions - TS-90B Ultimate Support

How do I assemble the TS-90B speaker stand?

The stand is simple to assemble: extend the legs, attach the top pole, and tighten the locking collar. No tools required.

What is the maximum height of the stand?

The TS-90B can be adjusted from 3 ft to a maximum of 6 ft using the telescopic pole.

What speakers are compatible with this stand?

It fits most speakers with a standard 1 3/8 inch pole mount. Always check your speaker's mounting diameter.

How much weight can the stand hold?

The stand has a rated capacity of 100 lbs (45 kg). Do not exceed this limit to ensure stability.

Is the stand stable on uneven surfaces?

The stand features non-slip rubber feet that provide grip on most surfaces. For uneven ground, adjust legs individually for leveling.

Can I use this stand outdoors?

Yes, but avoid prolonged exposure to rain or moisture. The steel construction may rust if not dried after wet use.

How do I clean and maintain the stand?

Wipe with a damp cloth and mild detergent. Lubricate moving parts occasionally with silicone spray to ensure smooth adjustment.

Does the stand come with a carrying bag?

Yes, a carrying bag is included for easy transport and storage.

How do I disassemble the stand for storage?

Lower the height, remove the top pole, and fold the legs inward. Secure all parts with the provided straps.

What safety precautions should I take?

Always lock the safety pin after adjusting height. Place on a level surface and avoid overloading. Keep away from children.

USER MANUAL TS-90B Ultimate Support

WARRANTY INFORMATION

Ultimate Support Systems offers a Limited Lifetime Warranty on TS-90 SERIES. For Full Details, Exclusions and Limitations as well as information on Obtaining Warranty Service, please see full warranty details available online at www.ultimatesupport.com.

To purchase the Ultimate Protection Plus Premium Service and Support Plan, please visit www.ultimatesupport.com or call customer support at 800 - 525 -5628 for more information.

WARRANTY REGISTRATION

Visit www.ultimatesupport.com for a quick and convenient process for registering your new Ultimate Support product. Warranty Registration and Proof of Purchase are required for warranty fulfilment. Full Limited Lifetime Warranty and Ultimate Protection Plus Premium Service and Support Plan details are available online.

970.776.1920 . www.ultimatesupport.com . Copyright 2009, Ultimate Support Systems . All Rights Reserved

ULTIMATE SUPPORT™

THE STRENGTH OF INNOVATION

Product Manual for Ultimate Support

TS-90 SERIES TELELOCK™

STANDARD SPEAKER STAND TS-90B ITEM #13908

TALL SPEAKER STAND TS-99B ITEM #13910

TALL LEVELING LEG SPEAKER STAND TS- 99BL ITEM #13642

Simple line drawing of a rectangular device with a top panel and front panel (no text or symbols)

Black tripod-mounted device with a vertical pole, no visible text or symbols on the device itself.

Revision 6, 03.21.09 . Product Manual Nam /SPK90-M

SET-UP

STEP 1

Open leg fitting lock lever.

STEP 2

Turn stand upside down and pivot legs so Ultimate Support label faces you.

STEP 3

Turn stand upright and slide leg fitting to adjust diameter of leg spread. Leg braces should be parallel to floor for maximum stability. Close lock lever.

STEP 4

The built-in adapter fits both 1-1/2" or 1-3/8" internal diameter speaker sockets. Use the lower position for 1-1/2". For 1-3/8" sockets, depress push buttons and raise adapter until it locks in raised position.

STEP 5

Line up arrow TeleLock® collar with "RAISE". Then raise center tube 6-10". Put speaker cabinet on top of the stand and raise the cabinet to desired height. Set to "LOCK" position.

STEP 6

To lower speakers, SLOWLY rotate arrow on TeleLock collar to "LOWER" position until speaker starts to lower. To slow descent, turn collar toward the "RAISE" position. When ready to remove the speaker, rotate collar to "LOCKED" position.

On TS-99BL Leveling Leg Stand, 3rd leg adjusts to level stand on uneven surfaces. Untighten leg telescoping collar, lengthen leg and retighten knob.

SPECIAL INSTRUCTIONS

1. Occasionally clean the stand with a damp cloth or non-abrasive cleaner.
2. When loading the stand, ONLY add the speaker when the stand is in a fully upright position (all legs on the floor).
3. Do not drag the stand while it is loaded; this could break the fittings and result in damage to the stand which will not be covered under warranty.
4. Check that the leg collar is securely locked when supporting equipment.
5. Always release the TeleLock collar with caution and stand clear of the load.
6. The stand is equipped with a tube lock which prevents accidentally pulling out the center tube.

LIGHTING TREE

Turn a Tall TS-99B, or TS-99BL Speaker Stand into a Lighting Tree.

For a Single-Tier Lighting Tree add:

LTB-48B (#14107)

48" Lighting Crossbar

For a Two-Tier Lighting Tree add:

LTV-24B (#14108) 24" Vertical Extension LTB-48B (#14107) 48" Lighting Crossbar LTB-24B (#14106) 24" Lighting Crossbar Pair

ACCESSORIES

Speaker Stand

Mounting Bracket

BMB-200K (#10766)

External bracket securely mounts any speaker cabinet with a flat bottom on an Ultimate Support speaker stand.

Speaker Stand Socket

Mounting Bracket

TSM-150MK (#13421)

TSM-138MK (#13425)

Internal metal bracket securely mounts any speaker cabinet with a flat bottom on an Ultimate Support speaker stand.

Zippered Tote Bags

Heavy-duty, padded, zippered Tote Bags

BAG-90 (#15691)

Holds one TS-90B Speaker Stand. 10.5" x 49.5" (267 mm x 1257 mm)

BAG-90D (#15693)

Holds two TS-90B Speaker Stands. 14.5" x 49.5" (368 mm x 1257 mm)

BAG-99 (#15692)

Holds one TS-99B/TS-99BL Speaker Stand. 10.5" x 60.5" (267 mm x 1537 mm)

BAG-99D (#15694)

Holds two TS-99B/TS-99BL Speaker Stands. 14.5" x 60.5" (368 mm x 1537 mm)