ZWX 1506 W - Washing machine Zanussi-Electrolux - Free user manual and instructions
Find the device manual for free ZWX 1506 W Zanussi-Electrolux in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Washing Machine |
| Brand | Zanussi-Electrolux |
| Model | ZWX 1506 W |
| Capacity (kg) | 6 kg |
| Maximum Spin Speed (rpm) | 1000 rpm |
| Energy Class | A+ |
| Dimensions (Height x Width x Depth) | 85 cm x 60 cm x 55 cm |
| Weight (kg) | 67 kg |
| Voltage / Frequency | 220-240 V / 50 Hz |
| Number of Programs | 15 |
| Water Consumption (liters per cycle) | 45 L |
| Annual Energy Consumption (kWh) | 195 kWh |
| Noise Level (Wash/Spin dB) | 59 / 76 dB |
| Display Type | LED |
| Delay Start | Yes, up to 24 hours |
| Child Lock | Yes |
| Overload Protection | Yes |
| Self-Cleaning Detergent Drawer | Yes |
| Spare Parts Availability | 10 years |
Frequently Asked Questions - ZWX 1506 W Zanussi-Electrolux
How to install the Zanussi-Electrolux ZWX 1506 W washing machine?
Remove all packaging and transport bolts. Level the machine by adjusting the feet. Connect the water inlet hose to a cold water tap with 3/4 inch thread and ensure the drain hose is properly secured into a standpipe or sink. Plug into a grounded outlet. Refer to the manual for detailed steps.
What is the maximum load capacity of this model?
The maximum load capacity is 6 kg for cotton and synthetics. Do not overload to ensure efficient washing and avoid damage.
How to clean the detergent drawer?
Press the release lever and pull out the drawer. Rinse under warm water to remove residues. Use a small brush to clean the compartments. Wipe dry and reinsert. For best results, clean every 2 months.
What should I do if the machine does not start?
Check if the door is fully closed. Ensure the water tap is open and the drain hose is not kinked. Verify the power supply and that the plug is securely inserted. If the problem persists, consult the error code in the manual.
How to activate the child lock on ZWX 1506 W?
Press and hold the Start/Pause button for 3-5 seconds until a lock symbol appears on the display. Repeat to deactivate. This prevents accidental program changes during operation.
What does error code E10 mean?
Error code E10 indicates a water fill problem. Check that the water tap is fully open, the inlet hose is not clogged, and the water pressure is sufficient. If the issue persists, the inlet valve may need replacement.
How to delay the start of a wash cycle?
Select a program, then press the Delay Start button repeatedly to set the desired delay (up to 24 hours). Press Start/Pause to confirm. The countdown will begin.
Why is the machine vibrating excessively during spin?
Ensure the transport bolts are removed. Check that the machine is level (adjust feet). Uneven loads can cause vibration; redistribute laundry evenly. Also verify the floor is solid.
What is the spin speed of ZWX 1506 W?
The maximum spin speed is 1000 rpm. You can adjust it using the spin speed button; lower speeds are available for delicate fabrics.
How to order spare parts for this model?
Visit the official Zanussi-Electrolux spare parts website or contact authorized service centers. Provide the model number ZWX 1506 W and the part name. Most parts are available for at least 10 years after purchase.
User questions about ZWX 1506 W Zanussi-Electrolux
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual ZWX 1506 W - Zanussi-Electrolux and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ZWX 1506 W by Zanussi-Electrolux.