ZWC 85050 W - Washing machine Zanussi-Electrolux - Free user manual and instructions
Find the device manual for free ZWC 85050 W Zanussi-Electrolux in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Washing Machine |
| Loading Type | Front Load |
| Capacity | 8 kg |
| Spin Speed | 1200 rpm |
| Dimensions (Height x Width x Depth) | 85 cm x 60 cm x 55 cm |
| Net Weight | 65 kg |
| Energy Efficiency Class | A++ |
| Annual Energy Consumption | 170 kWh |
| Annual Water Consumption | 9000 L |
| Noise Level (Wash/Spin) | 52 dB / 76 dB |
| Number of Programs | 15 |
| Key Programs | Cotton, Synthetics, Delicates, Wool, Quick Wash, Rinse & Spin |
| Additional Functions | Delay Start, Pre-Wash, Extra Rinse, Spin Speed Reduction |
| Display | LED Digital |
| Control Type | Knob + Buttons |
| Drum Type | Stainless Steel |
| Door Opening | Left Hinged, 180° Opening |
| Child Lock | Yes |
| Overflow Protection | AquaStop |
| Self-Cleaning | Drum Clean Program |
| Filter Type | Cleanable Lint Filter |
| Power Supply | 220-240 V, 50 Hz |
| Power Consumption | 2000 W |
| Included Accessories | User Manual, Water Inlet Hose, Drain Hose, Transit Bolts |
Frequently Asked Questions - ZWC 85050 W Zanussi-Electrolux
How do I install the washing machine?
Remove all transit bolts before first use. Connect the water inlet hose to a cold water tap with ¾ thread. Place the drain hose into a standpipe or sink. Ensure the machine is level using the adjustable feet. Plug into a grounded outlet.
What does the error code E10 mean?
Error code E10 indicates a water filling problem. Check that the water tap is fully open, the inlet hose is not kinked, and the water pressure is sufficient. Clean the inlet filter if necessary.
How do I clean the detergent drawer?
Press the release button inside the drawer and pull it out. Rinse under warm water to remove detergent residues. Clean the compartment with a brush. Dry and reinsert.
Can I open the door during a cycle?
The door is locked during operation for safety. If you need to add laundry, use the 'Pause' function. Wait a few minutes for the door to unlock. Do not force the door open.
What is the maximum load for a cotton cycle?
The maximum load for cotton is 8 kg. Overloading can reduce washing efficiency and cause excessive vibration.
How do I clean the drain pump filter?
Unplug the machine. Open the lower cover and place a towel under the filter. Turn the filter counterclockwise to remove it. Clean out any debris and reinsert tightly. Close the cover.
Why is the machine not spinning?
Check if a delicate program with low spin speed is selected. Ensure the load is balanced. The machine may have an unbalanced load detection. Redistribute clothes and restart.
How do I use the delay start function?
Select the desired program, then press the Delay Start button repeatedly to set the delay time (e.g., 3h, 6h, 9h). Press Start. The machine will begin the cycle after the delay.
What maintenance is required?
Regularly clean the detergent drawer and door seal. Run a Drum Clean program monthly. Check and clean the drain pump filter every 3 months. Leave the door ajar to prevent mold.
Where can I find spare parts?
Authorized service centers and online retailers carry spare parts. Use the model number ZWC 85050 W to ensure compatibility. Common parts: door seal, pump filter, inlet hose.
User questions about ZWC 85050 W Zanussi-Electrolux
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual ZWC 85050 W - Zanussi-Electrolux and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ZWC 85050 W by Zanussi-Electrolux.