Mirage WU14K - Video projector Christie - Free user manual and instructions
Find the device manual for free Mirage WU14K Christie in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 3-chip DLP Video Projector |
| Resolution | WUXGA (1920 x 1200) |
| Brightness | 14,000 lumens |
| Contrast Ratio | 2000:1 |
| Lamp Type | Xenon (rated 1500 hours) |
| Dimensions (W x D x H) | 20.2 x 26.6 x 9.8 in (513 x 676 x 249 mm) |
| Weight | 75 lb (34 kg) |
| Power Consumption | 1500 W (typical) |
| Input Signal Compatibility | DVI, HDMI, SDI, VGA, Component, Composite |
| Lens Shift | Motorized vertical and horizontal shift |
| Zoom and Focus | Motorized zoom and focus |
| Supported Display Colors | 10-bit per color (1.07 billion colors) |
| Operating Humidity | 10% to 90% non-condensing |
| Operating Temperature | 50°F to 95°F (10°C to 35°C) |
| Filter Cleaning Interval | Every 500 hours of operation |
| Lamp Replacement | User-accessible; refer to manual for procedure |
| Safety Features | Overheat protection, key lock, Kensington lock |
| Warranty | 3 years standard (may vary by region) |
| Included Accessories | Power cord, remote control, lens cap, user manual |
Frequently Asked Questions - Mirage WU14K Christie
How do I clean the air filter on the Mirage WU14K?
The air filter should be cleaned every 500 hours of operation. Remove the filter cover, take out the filter, and vacuum it gently. Do not wash with water. Replace if damaged.
What is the typical lamp life of the Mirage WU14K?
The xenon lamp is rated for approximately 1500 hours of operation. For optimal brightness and performance, replace the lamp when prompted by the projector.
Can I replace the lamp myself?
Yes, the lamp is user-accessible. Follow the instructions in the manual to safely remove the old lamp and install a new one. Ensure the projector is cool and unplugged.
What resolutions does the Mirage WU14K support?
The native resolution is WUXGA (1920x1200). It also supports lower resolutions such as 1080p, 720p, and various computer formats, with scaling.
How do I connect a computer using HDMI?
Connect the HDMI cable from your computer to the HDMI input on the projector. Then select the HDMI source using the remote or on-screen menu. If no image appears, check that the input is selected and the computer settings are correct.
What is the throw distance for a 100-inch screen?
The throw distance varies by lens. For standard lens, a 100-inch screen typically requires a distance of 10 to 15 feet (3 to 4.6 meters). Refer to the lens chart in the manual for precise calculations.
Why does the projector keep overheating?
Overheating may be caused by a clogged air filter, blocked vents, or high ambient temperature. Clean the filter, ensure proper ventilation, and reduce the room temperature. If it persists, consult a technician.
How can I reset the lamp timer after replacement?
After replacing the lamp, go to the menu, select 'Service', then 'Lamp Time Reset'. Confirm the reset. This clears the lamp hours and resets the replacement reminder.
Does the Mirage WU14K support 3D?
Yes, it supports active 3D via DLP Link. You will need compatible 3D glasses and a 3D signal source. Enable 3D in the menu and adjust sync settings if necessary.
What are the dimensions and weight of the projector?
The projector measures 20.2 x 26.6 x 9.8 inches (513 x 676 x 249 mm) and weighs approximately 75 lb (34 kg). Ensure your mounting solution can support this weight.
User questions about Mirage WU14K Christie
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video projector in PDF format for free! Find your manual Mirage WU14K - Christie and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Mirage WU14K by Christie.