BDEN38520HW - Dishwasher BEKO - Free user manual and instructions
Find the device manual for free BDEN38520HW BEKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Dishwasher |
| Model | BDEN38520HW |
| Brand | Beko |
| Width | 60 cm |
| Height | 85 cm |
| Depth | 60 cm |
| Weight | Approximately 50 kg |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Energy Class | A+ |
| Place Settings | 15 |
| Noise Level | 44 dB(A) |
| Number of Programs | 6 (Eco, Intensive, Quick, Auto, Glass, Rinse) |
| Drying System | Active Dry Technology |
| Water Consumption | 9.5 L per cycle (Eco) |
| Energy Consumption | 1.05 kWh per cycle (Eco) |
| Delay Start | Up to 24 hours |
| Salt and Rinse Aid Indicator | Yes |
| Self-Cleaning Filter | Yes |
| Child Lock | Yes |
| Adjustable Rack Height | Upper basket adjustable |
| Cutlery Basket | Yes |
| Water Protection System | AquaStop |
| Spare Parts Availability | Racks, filters, spray arms, heating element |
| Repair Index (France) | 8.0 / 10 |
Frequently Asked Questions - BDEN38520HW BEKO
What does the error code E1 mean on my Beko dishwasher?
Error code E1 typically indicates a water inlet problem. Check if the water tap is turned on, the inlet hose is kinked, or the filter is clogged. If the issue persists, contact a technician.
How do I clean the filter of the BDEN38520HW?
To clean the filter, turn off the dishwasher and remove the lower rack. Twist the cylindrical filter (anti-flood device) counterclockwise and pull it out. Rinse it under running water, then reassemble. Do this monthly for optimal performance.
Can I use regular dishwasher salt instead of branded one?
Yes, you can use any high-purity dishwasher salt (sodium chloride) designed for dishwashers. Avoid table salt as it may contain additives that can damage the water softener.
What is the maximum plate size that fits in the lower basket?
The lower basket can hold plates up to 30 cm in diameter. For larger platters, fold down the tines or use the upper basket.
Why does my dishwasher leave white spots on glasses?
White spots are usually caused by hard water. Ensure the rinse aid dispenser is filled and the water softener is set correctly. Increase the rinse aid dosage if necessary. Also, check the salt level.
How long does the Eco program take?
The Eco program on the BDEN38520HW takes approximately 3 hours and 30 minutes at 50°C. It is designed for normally soiled dishes and is the most energy-efficient option.
Can I install the dishwasher myself?
Yes, you can install it yourself if you have basic plumbing and electrical knowledge. Follow the installation manual carefully. Ensure the appliance is level and connected to a grounded outlet. For safety, we recommend professional installation.
How do I activate the child lock?
To activate the child lock, press and hold the 'Delay' and 'Program' buttons simultaneously for 3 seconds until the child lock indicator lights up. Repeat the same steps to deactivate it.
What should I do if the dishwasher stops mid-cycle?
Check if there is a power outage or if the door is opened. If not, press the Start button to resume. If the cycle does not continue, cancel the program and restart. If the problem persists, consult the manual's troubleshooting section.
Where can I find the model and serial number?
The model and serial number are located on the rating plate attached to the right-hand side of the dishwasher door. You will need them when ordering spare parts or contacting customer support.
User questions about BDEN38520HW BEKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual BDEN38520HW - BEKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BDEN38520HW by BEKO.