BP-828 - Battery CANON - Free user manual and instructions

Product Type	Rechargeable Battery
Brand	Canon
Model	BP-828
Battery Type	Lithium-Ion (Li-ion)
Nominal Voltage	7.2 V
Capacity	800 mAh
Energy	5.76 Wh
Compatible Devices	Canon camcorders using BP-828 (e.g., HF R series, HFS series)
Charging Time	Approximately 2 hours
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20°C to 45°C (-4°F to 113°F)
Dimensions (L x W x H)	38 x 28 x 18 mm
Weight	50 g
Protection Features	Overcharge, overdischarge, short circuit
Cycle Life	Approximately 300-500 cycles
Color	White/Gray
Care Instructions	Avoid extreme temperatures; store with 50% charge
Safety	Keep away from fire and water; do not disassemble
Repairability	Non-replaceable cells; replace entire battery
Package Contents	1x Canon BP-828 Battery

Frequently Asked Questions - BP-828 CANON

How long does the Canon BP-828 battery last on a single charge?

The Canon BP-828 battery provides approximately 100-150 minutes of continuous recording time depending on the camcorder model and usage conditions.

Can I use a BP-828 battery in my Canon camcorder that originally came with a different model?

Yes, if your camcorder is compatible with the BP-8 series batteries. Check your camera manual for supported battery models.

How should I store the BP-828 battery when not in use?

Store the battery in a cool, dry place at room temperature. It is best to keep it at a 50% charge level to prolong lifespan.

What is the best way to charge the Canon BP-828?

Use the Canon CA-570 or compatible charger. Avoid charging in extreme temperatures and unplug once fully charged.

How do I know if my BP-828 battery is defective?

Signs of a defective battery include rapid discharge, swelling, excessive heat during charging, or the camcorder not turning on. If noticed, stop use immediately.

What is the lifespan of the Canon BP-828 battery?

Typically, it lasts for 300-500 charge cycles before capacity significantly degrades.

Can I use a third-party charger with the BP-828?

Yes, but ensure the charger is compatible with Lithium-Ion batteries and outputs the correct voltage (8.4V). Using unauthorized chargers may damage the battery.

The battery indicator shows full, but my camcorder dies quickly. What’s wrong?

This could indicate battery degradation or a calibration issue. Try fully discharging and recharging the battery two to three times to recalibrate.

Is the BP-828 battery compatible with the Canon HF R10 camcorder?

Yes, the Canon HF R10 uses the BP-828 battery. It is also compatible with other HF R series and older models.

How do I dispose of a Canon BP-828 battery?

Do not throw it in the trash. Recycle at designated battery recycling centers or return to Canon authorized dealers.

USER MANUAL BP-828 CANON

Safety Instructions and Important Information

For details about charging and using the battery pack, please refer to the instruction manual of your camcorder.

DANGER!

• Keep the battery pack away from fire (or it might explode).
• Do not expose it to temperatures greater than 60 °C (140 °F). Do not leave it near a heater, or inside a car in hot weather, for example.
• Do not try to disassemble or modify it.
• Do not drop it or subject it to shocks.
• Do not get it wet.

About the terminal cover

Attach the terminal cover whenever the battery pack is not being used. The battery terminal cover has a □ shaped hole. This is useful when you wish to differentiate between charged and uncharged battery packs.

Terminal cover attached

Charged

Uncharged

Specifications

	BP-320	BP-520
Battery type	Rechargeable lithium ion battery
Operating temperature	0 - 40^ C( 32 - 104^ F)
Rated voltage	7.4 V DC
Battery capacity	1,780 mAh	2,670 mAh
Dimensions	30.7 × 39.4 × 40.2 mm ( 1.2 × 1.6 × 1.6 in. )	30.7 × 55.7 × 40.2 mm ( 1.2 × 2.2 × 1.6 in. )
Weight	85 g (3.0 oz.)	121 g (4.3 oz.)

Weight and dimensions are approximate. Errors and omissions excepted. Subject to change without notice.

USA and Canada only:

The Lithium ion/polymer battery is recyclable. Please call 1-800-8-BATTERY for information on how to recycle this battery.

CAN ICES-3(B)/NMB-3(B)

FCC NOTICE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment.

CANON EUROPA N.V.

Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands

CANON INC.

30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan

初版：2013.4.1

PRINTED IN JAPAN

IMPRIME AU JAPON

IMPRESO EN JAPÓN