BP-110 - Battery CANON - Free user manual and instructions

Product Type	Rechargeable Battery
Brand	Canon
Model	BP-110
Battery Type	Rechargeable Lithium Ion
Rated Voltage	3.7 V DC
Battery Capacity (Typical)	1,120 mAh
Battery Capacity (Minimum)	1,050 mAh
Energy	3.9 Wh
Operating Temperature	0 – 40 °C (32 – 104 °F)
Dimensions (W x H x D)	33 × 10 × 51 mm (1.3 × 0.39 × 2 in.)
Weight	28 g (0.99 oz.)
Terminal Cover	Included, with square hole to distinguish charged/uncharged
Safety Precautions	Keep away from fire, do not expose to >60°C, do not disassemble, drop, or get wet
Recycling Information	Recyclable; call 1-800-8-BATTERY (USA/Canada)
FCC Compliance	Part 15 Class B digital device
ICES Compliance	Canadian ICES-003

Frequently Asked Questions - BP-110 CANON

How do I charge the Canon BP-110 battery?

Refer to the instruction manual of your camcorder for charging details.

What temperature range is safe for the battery?

Do not expose to temperatures above 60°C (140°F). Operating temperature is 0–40°C (32–104°F).

Is the BP-110 compatible with all Canon camcorders?

It is designed for select Canon camcorders; check your camcorder's manual for compatibility.

How do I recycle the BP-110 battery?

In USA and Canada, call 1-800-8-BATTERY for recycling information. The lithium ion battery is recyclable.

What is the purpose of the terminal cover?

Attach the terminal cover when not in use. It has a square hole to differentiate between charged and uncharged batteries.

What is the capacity of the BP-110?

Typical capacity is 1,120 mAh (3.9 Wh), minimum 1,050 mAh.

How much does the BP-110 weigh?

Approximately 28 g (0.99 oz.).

Can I disassemble or modify the battery?

No, do not try to disassemble or modify it, as it may cause explosion or injury.

Does the battery comply with FCC regulations?

Yes, it complies with Part 15 of the FCC Rules as a Class B digital device.

What should I do if the battery gets wet?

Do not get it wet. If it becomes wet, stop using it and contact Canon support.

USER MANUAL BP-110 CANON

Safety Instructions and Important Information

For details about charging and using the battery pack, please refer to the instruction manual of your camcorder.

DANGER!

• Keep the battery pack away from fire (or it might explode).
• Do not expose it to temperatures greater than 60 °C (140 °F). Do not leave it near a heater, or inside a car in hot weather, for example.
• Do not try to disassemble or modify it.
• Do not drop it or subject it to shocks.
• Do not get it wet.

About the terminal cover

Attach the terminal cover whenever the battery pack is not being used. The battery terminal cover has a □ shaped hole. This is useful when you wish to differentiate between charged and uncharged battery packs.

Terminal cover attached

Specifications

	BP-110
Battery type	Rechargeable lithium ion battery
Operating temperature	approx. 0 – 40 °C (32 – 104 °F)
Rated voltage	3.7 V DC
Battery capacity	1,120 mAh (typical)3.9 Wh / 1,050 mAh (minimum)
Dimensions	33 × 10 × 51 mm(1.3 × 0.39 × 2 in.)
Weight	28 g (0.99 oz.)

Weight and dimensions are approximate. Errors and omissions excepted. Subject to change without notice.

USA and Canada only:

The Lithium ion/polymer battery is recyclable. Please call 1-800-8-BATTERY for information on how to recycle this battery.

Canadian Radio Interference Regulations

The Class B digital apparatus complies with Canadian ICES-003.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions;

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment.