HFC 2B19 X UK - Dishwasher HOTPOINT - Free user manual and instructions
Find the device manual for free HFC 2B19 X UK HOTPOINT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Dishwasher |
| Brand | Hotpoint |
| Model | HFC 2B19 X UK |
| Color | Stainless Steel |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
| Weight | Approx. 40 kg |
| Electrical Supply | 220-240 V, 50 Hz, 10 A |
| Water Connection | Cold water, 3/4 inch threaded hose |
| Place Settings | 14 |
| Energy Efficiency Class | E (EU 2019) |
| Annual Energy Consumption | 294 kWh |
| Annual Water Consumption | 2660 L |
| Noise Level | 49 dB(A) re 1 pW |
| Number of Programs | 6 |
| Programs | Eco 50°C, Intensive 65°C, Normal 60°C, Quick 30min, Glass 45°C, Pre-rinse |
| Drying System | Condensation drying |
| Delay Start | Yes (1-24 hours) |
| Half Load Option | Yes |
| Self-Cleaning Filter | Yes |
| Child Lock | Yes |
| Salt / Rinse Aid Indicator | Yes |
| Maintenance | Clean filters monthly; check spray arms for blockages |
| Spare Parts Availability | Available from Hotpoint service centers |
Frequently Asked Questions - HFC 2B19 X UK HOTPOINT
How do I install the dishwasher?
Ensure the unit is placed on a level floor. Connect the water inlet hose to a cold water supply (3/4 inch thread) and the drain hose to a sink trap or standpipe. Plug into a grounded outlet. Level the feet to prevent tilting. Refer to the installation manual for detailed steps.
How do I clean the filters?
Remove the lower rack. Turn the coarse filter and fine filter to unlock and lift out. Rinse under running water with a brush. Reassemble in reverse order. Clean monthly for optimal performance.
What does the error code F6 mean?
Error code F6 indicates a heating element fault. Check the heating element and thermistor. Contact Hotpoint service if the issue persists. Always unplug before inspecting.
How do I use the salt dispenser?
Open the salt container cap (usually at the bottom of the tub). Fill with dishwasher salt, then add water until full. Close cap tight. The salt indicator on the panel will reset after refill.
Why is my dishwasher not drying dishes?
Check that rinse aid is full and the rinse aid setting is appropriate. Ensure the final rinse temperature is high enough. Do not overload the rack. Clean the drying fan filter if available.
Can I use regular dish soap?
No, only use dishwasher detergent (powder, gel, or tablets). Regular dish soap causes excessive foam and may damage the machine.
How do I enable the child lock?
Press and hold the Child Lock button (usually with a padlock icon) for 3 seconds. The indicator lights up. Repeat to disable. This prevents accidental button presses during a cycle.
What is the maximum cycle time?
The longest program is Intensive 65°C, which can take up to 175 minutes. Eco 50°C typically takes about 230 minutes for full load. Actual times depend on water temperature and soil level.
How do I fix a blocked spray arm?
Remove the upper and lower spray arms. Rinse under water to dislodge food particles. Use a toothpick to clear the nozzles. Reattach securely. Check water pressure if problem recurs.
Where can I find spare parts?
Visit the Hotpoint official website or contact authorized service centers. Use the model number HFC 2B19 X UK to order correct parts like filters, spray arms, and heating elements.
User questions about HFC 2B19 X UK HOTPOINT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual HFC 2B19 X UK - HOTPOINT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HFC 2B19 X UK by HOTPOINT.