HCS-8300MOD - Uncategorized TAIDEN - Free user manual and instructions
Find the device manual for free HCS-8300MOD TAIDEN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Infrared Receiver for Conference Systems |
| Brand | TAIDEN |
| Model | HCS-8300MOD |
| Dimensions (W x H x D) | Approx. 180 x 100 x 30 mm |
| Weight | Approx. 0.3 kg |
| Power Supply | Rechargeable lithium-ion battery; 3.7V, 2000mAh |
| Battery Life | Up to 20 hours of continuous use |
| Charging Time | Approx. 3 hours |
| Frequency Range | 2.3 - 2.5 GHz (infrared carrier) |
| Number of Channels | Up to 4 simultaneous channels |
| Audio Output | 3.5mm stereo headphone jack |
| Signal Coverage | Line-of-sight up to 15 meters |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Material | ABS plastic, matte finish |
| Included Accessories | Neck strap, earphone, charging cable |
| Maintenance | Clean with a soft, dry cloth; avoid liquids |
| Safety | Do not disassemble or expose to moisture |
| Spare Parts Availability | Battery, earphone, charging cable available |
| Repairability | Serviceable by authorized technicians only |
Frequently Asked Questions - HCS-8300MOD TAIDEN
How do I turn on the HCS-8300MOD receiver?
Press and hold the power button on the top for 2 seconds until the LED indicator lights up. To turn off, press and hold again.
How can I pair the receiver with a transmitter?
The receiver automatically pairs with any TAIDEN infrared transmitter within range. Ensure both devices are powered on and within line-of-sight.
What should I do if the audio is distorted?
Check the volume level on your device and try adjusting it. Also ensure the earphone is fully inserted and clean the headphone jack.
How long does the battery last?
The battery lasts up to 20 hours on a full charge. Actual time may vary depending on volume level and usage.
Can I use the receiver while charging?
Yes, you can use the receiver while it is charging via the micro USB port. However, charging may take longer.
How do I know when the battery is low?
The LED indicator will flash red when the battery is low. You should recharge soon.
What channels are available on this receiver?
The HCS-8300MOD supports up to 4 channels. Use the channel selector button to cycle through channels A, B, C, and D.
How do I clean the receiver?
Use a soft, dry cloth to wipe the exterior. Do not use any liquids or abrasive cleaners. Avoid getting moisture into any openings.
What should I do if the receiver does not turn on?
First, ensure the battery is charged. Try charging for at least 30 minutes. If still no response, perform a reset by inserting a pin into the reset hole.
Where can I find spare parts or get repairs?
Contact TAIDEN authorized service centers. Spare batteries, earphones, and charging cables are available. Do not attempt to repair yourself.
User questions about HCS-8300MOD TAIDEN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual HCS-8300MOD - TAIDEN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HCS-8300MOD by TAIDEN.