HCS-8316SDI - Server TAIDEN - Free user manual and instructions
Find the device manual for free HCS-8316SDI TAIDEN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Conference Server |
| Brand | TAIDEN |
| Model | HCS-8316SDI |
| Dimensions (W x D x H) | 483 x 344 x 88 mm (19-inch rack mount, 2U) |
| Weight | Approx. 5 kg |
| Power Supply | 100-240V AC, 50/60 Hz |
| Power Consumption | 60 W max |
| Main Functions | Digital conference system server; supports up to 64 delegate units; SDI video input/output; audio processing; Ethernet control; compatible with TAIDEN software |
| Cleaning | Wipe with a soft dry cloth; do not use liquids or solvents |
| Safety | Operate in a dry environment; ensure proper ventilation; do not block air vents |
| Spare Parts | Replacement power supply, control panel, and cables available through TAIDEN support |
| Repairability | Module design for easy servicing; contact authorized service center |
| General Information | 19-inch rack mount, 2U height; supports remote management via web interface |
Frequently Asked Questions - HCS-8316SDI TAIDEN
How do I set up the TAIDEN HCS-8316SDI server?
Mount the server in a 19-inch rack using the provided brackets. Connect the power cable and turn on the unit using the front panel switch. Connect delegate units via the RJ-45 ports and configure the system using the TAIDEN Control Software.
What is the maximum number of delegate units supported?
The HCS-8316SDI supports up to 64 microphone units in a daisy-chain or star topology configuration.
How do I connect SDI video inputs/outputs?
Use BNC cables to connect external SDI sources to the SDI IN ports and displays to the SDI OUT ports. Ensure the video standard matches the system settings (e.g., 1080p@60).
The server does not power on. What should I check?
Verify the power cord is securely connected to both the server and a working electrical outlet. Check the front panel power indicator. If off, try a different outlet or contact support for potential power supply failure.
How can I update the firmware on the HCS-8316SDI?
Download the latest firmware from the TAIDEN website. Connect a computer to the server via Ethernet, access the web interface, and use the firmware update tool. Do not disconnect power during the update.
What is the default IP address for the server?
The default IP address is 192.168.1.100 with subnet mask 255.255.255.0. You can change it via the front panel LCD menu or the web interface.
Can I use the HCS-8316SDI with wireless microphones?
Yes, TAIDEN offers wireless delegate units compatible with this server when used with a wireless access point connected to the server’s network port.
How do I perform a factory reset?
Press and hold the RESET button on the rear panel for 10 seconds using a paperclip. The server will reboot to factory defaults. Note: This erases all custom configurations.
What is the operating temperature range?
The recommended operating temperature is 0°C to 40°C (32°F to 104°F). Ensure adequate ventilation to prevent overheating.
How do I clean the server?
Turn off and unplug the server. Use a soft dry cloth to wipe the exterior. Do not use any liquids, abrasive cleaners, or compressed air near the vents.
User questions about HCS-8316SDI TAIDEN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual HCS-8316SDI - TAIDEN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HCS-8316SDI by TAIDEN.