VTP-18 - Drill HITACHI - Free user manual and instructions
Find the device manual for free VTP-18 HITACHI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Corded Electric Drill |
| Brand | Hitachi |
| Model | VTP-18 |
| Power Input | 600 W |
| Voltage | 230 V |
| Frequency | 50 Hz |
| No-Load Speed | 0 - 2800 rpm (variable) |
| Chuck Type | Keyless |
| Chuck Capacity | 1.5 - 13 mm |
| Drilling Capacity (Steel) | 13 mm |
| Drilling Capacity (Wood) | 38 mm |
| Weight | 1.5 kg |
| Dimensions (L x W x H) | 260 x 68 x 200 mm |
| Protection Class | Class II (Double Insulated) |
| Variable Speed Trigger | Yes |
| Forward/Reverse | Yes |
| Lock-on Button | Yes |
| Auxiliary Handle | Included |
| Depth Stop | Included |
| Power Cord Length | 2.5 m |
| Included Accessories | Side handle, depth stop, chuck key |
| Maintenance | Clean air vents regularly; replace carbon brushes when worn |
| Safety Features | Double insulation, lock-on button prevents accidental start |
Frequently Asked Questions - VTP-18 HITACHI
How do I change the chuck on the Hitachi VTP-18?
The VTP-18 features a keyless chuck. To change bits, rotate the chuck sleeve counterclockwise to open, insert the bit, then tighten clockwise by hand. For chuck removal, use a hex key to loosen the retaining screw (left-hand thread) and unscrew the chuck.
What drill bits are compatible with this drill?
The drill accepts bits with shank diameters from 1.5 mm to 13 mm. Use standard round shank bits for drilling in wood, metal, or plastic. For masonry, use carbide-tipped bits rated for impact drilling.
How can I adjust the drilling speed?
The VTP-18 has a variable speed trigger. The speed increases as you squeeze the trigger. For precise control, practice light pressure on the trigger. There is no separate speed dial; it's fully variable based on trigger input.
How do I use the depth stop?
Slide the depth stop rod through the auxiliary handle clamp. Loosen the clamp, set the rod to the desired depth (the distance from the bit tip to the end of the rod), and tighten the clamp. The drill will stop when the rod contacts the workpiece.
What maintenance does the Hitachi VTP-18 require?
Regularly clean the air vents with a soft brush to prevent dust buildup. Check carbon brushes after every 50 hours of use; replace when worn to less than 6 mm. Lubricate the chuck occasionally with light oil.
Can this drill be used for masonry drilling?
Yes, the VTP-18 is suitable for masonry drilling when used with carbide-tipped masonry bits. Ensure the drill is set to hammer mode (if equipped) or use moderate pressure. The drill has sufficient power for small to medium masonry holes.
How do I replace the carbon brushes?
Unplug the drill. Remove the brush caps on the sides of the motor housing. Slide out the old brushes and insert new ones, ensuring curved contact face matches the commutator. Replace caps and run the drill for a few minutes to seat the brushes.
What safety precautions should I follow?
Always wear safety glasses and ear protection. Keep hands away from rotating parts. Use the auxiliary handle for better control. Do not force the drill; let the bit do the work. Ensure the power cord is away from sharp edges.
How should I store the drill?
Store the drill in a dry, dust-free place. Use the supplied case if available. Keep the chuck lightly lubricated. Do not wrap the cord around the tool; coil it loosely. Remove bits after use to prevent rust on the chuck.
Is the Hitachi VTP-18 corded or cordless?
The VTP-18 is a corded electric drill powered by mains electricity (230 V). It provides consistent power without battery worries, making it suitable for extended drilling tasks.
User questions about VTP-18 HITACHI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual VTP-18 - HITACHI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VTP-18 by HITACHI.