CP-S420 - Video projector HITACHI - Free user manual and instructions
Find the device manual for free CP-S420 HITACHI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video Projector |
| Brand | Hitachi |
| Model | CP-S420 |
| Display Technology | 3 LCD (Liquid Crystal Display) |
| Brightness | 1500 ANSI Lumens |
| Native Resolution | SVGA (800 x 600) |
| Contrast Ratio | 400:1 |
| Lamp Life | 2000 hours (typical) |
| Projection Distance | 1.0 m to 11.1 m |
| Projection Screen Size | 25 to 300 inches (diagonal) |
| Lens Projection Ratio | 1.5:1 to 1.8:1 |
| Keystone Correction | Vertical: +/- 15 degrees |
| Input Ports | VGA (D-sub 15 pin), S-Video, Composite Video, Audio (3.5mm) |
| Dimensions (W x H x D) | 11.4 x 3.0 x 8.1 inches (289 x 76 x 206 mm) |
| Weight | 6.4 lbs (2.9 kg) |
| Power Consumption | 240 W (max) |
| Power Supply | AC 100-240V, 50/60Hz |
| Remote Control Included | Yes |
| Maintenance | Clean air filter every 100 hours; replace lamp after 2000 hours |
| Safety Features | Auto shut-off after 15 minutes of inactivity |
| Spare Parts | Lamp (DT00141), Air Filter (MU01321) |
| Manual Language | English (EN) |
Frequently Asked Questions - CP-S420 HITACHI
How do I turn on the Hitachi CP-S420 projector?
Plug in the power cord and press the POWER button on the projector or remote control. Wait for the lamp to warm up.
What is the maximum image size I can project?
The CP-S420 can project images from 25 to 300 inches diagonally, depending on the distance from the screen.
How do I clean the air filter?
Turn off and unplug the projector. Remove the filter cover, take out the filter, and clean it with a vacuum cleaner. Reinstall the filter and cover. Replace the filter if damaged.
What does the 'Lamp' indicator mean?
The LAMP indicator flashes when the lamp is nearing the end of its life. Replace the lamp when prompted.
How can I connect my laptop to the projector?
Use a VGA cable to connect your laptop's VGA port to the projector's COMPUTER IN port. Select the RGB input source.
Why is the image blurry?
Adjust the FOCUS ring on the lens. If still blurry, check the projection distance and ensure the screen is within range.
How do I replace the lamp?
Turn off and unplug the projector. Let it cool for at least 45 minutes. Remove the lamp cover, unscrew the lamp unit, replace it with a new one, and tighten screws. Reset the lamp timer via the menu.
What is the native resolution of the CP-S420?
The native resolution is SVGA (800 x 600 pixels). For best quality, use a source with the same resolution.
How do I enable keystone correction?
Press the KEYSTONE button on the remote or navigate to the SETUP menu. Adjust the vertical keystone to correct trapezoidal distortion.
Where can I find the user manual?
The user manual is available for free download on notice-facile.com. You can also request a translation by selecting your language and providing your email.
User questions about CP-S420 HITACHI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video projector in PDF format for free! Find your manual CP-S420 - HITACHI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CP-S420 by HITACHI.