CP-SX1350 - Video projector HITACHI - Free user manual and instructions
Find the device manual for free CP-SX1350 HITACHI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video projector |
| Brand | Hitachi |
| Model | CP-SX1350 |
| Display Technology | LCD (3LCD) |
| Resolution | SXGA+ (1400x1050) |
| Brightness | 3500 ANSI lumens |
| Contrast Ratio | 2000:1 |
| Lamp Type | UHP lamp |
| Lamp Life | 3000 hours (normal), 4000 hours (eco) |
| Lens | Manual zoom and focus |
| Zoom Factor | 1.2x optical zoom |
| Image Size | 30 - 300 inches |
| Throw Ratio | 1.5 - 1.8:1 |
| Keystone Correction | Vertical ±30° |
| Inputs | HDMI, VGA, Composite, S-Video, Audio (3.5mm) |
| Outputs | VGA monitor out, Audio out |
| Control | RS-232C, IR remote |
| Power Consumption | 310W (normal) |
| Dimensions (W x H x D) | 340 x 100 x 265 mm |
| Weight | 3.5 kg |
| Cooling System | Dual fans |
| Noise Level | 32 dB (normal), 28 dB (eco) |
| Safety Features | Kensington lock, overheat protection |
| Maintenance | Filter cleaning every 500 hours; lamp replacement |
| Included Accessories | Remote control, power cable, VGA cable, user manual |
Frequently Asked Questions - CP-SX1350 HITACHI
How do I turn on the Hitachi CP-SX1350?
Connect the power cable and press the Power button on the projector or remote. The lamp will start and the projector will warm up.
How often should I replace the lamp?
The lamp lasts approximately 3000 hours in normal mode and 4000 hours in eco mode. Replace it when the LAMP indicator flashes or the image becomes dim.
Can I connect my laptop to the projector?
Yes, use a VGA or HDMI cable to connect your laptop to the corresponding input on the projector. Select the correct source via the remote.
How do I clean the air filter?
Turn off and unplug the projector. Remove the filter cover, take out the filter, and gently vacuum or wash it with water. Let it dry completely before reinserting.
The projected image is not square. How do I fix it?
Use the Keystone Correction feature on the remote or menu to adjust vertical trapezoid distortion. You can also physically tilt the projector.
What should I do if the projector overheats?
Ensure the vents are not blocked and the filter is clean. The projector may shut down automatically. Allow it to cool for 10 minutes before restarting.
How do I reset the lamp timer?
After replacing the lamp, go to the menu, select Lamp Reset, and confirm. This resets the timer for accurate lamp life tracking.
Why is there no sound from the projector?
The CP-SX1350 has no built-in speaker. You need to connect external speakers to the Audio Out port or use the HDMI audio if supported.
Can I use a ceiling mount?
Yes, the projector has mounting holes for a standard ceiling mount. Ensure the mount can support at least 3.5 kg and follow the installation instructions.
How do I update the firmware?
Firmware updates are rare. Check Hitachi's support website for updates. If available, download and load onto the projector via RS-232C or USB (if applicable).
User questions about CP-SX1350 HITACHI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video projector in PDF format for free! Find your manual CP-SX1350 - HITACHI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CP-SX1350 by HITACHI.