Luxury Single - Air mattress Active Era - Free user manual and instructions

Brand	Active Era
Model	Luxury Single
Product type	Single inflatable mattress (1 person)
Capacity	1 person
Power supply	Mains (power cord)
Built-in pump	Yes, electric air pump
Inflation time	Up to 2 minutes
Deflation time	Up to 3 minutes
Manual valve	Yes, for foot or manual pump
Material	Vinyl (PVC)
Recommended use	Indoor only
Cleaning	Soapy water, no chemicals
Puncture repair	PVC glue and standard patches
Storage	Dry and cool, folded without tight creases
Operating temperature	Avoid extreme temperatures
Safety	Do not use as a trampoline, keep away from sharp objects, do not leave children unattended
Control	Control dial: INFLATE, OFF, DEFLATE
Pump operation	Do not operate for more than 5 minutes, cool down for 20 minutes between uses
Overheat protection	Automatic shut-off in case of overheating
Included accessories	Power cord, storage compartment

Frequently Asked Questions - Luxury Single Active Era

How to inflate the Active Era Luxury Single mattress?

Unroll the mattress on a flat, clean surface. Open the lid of the power cord compartment. Make sure the manual valve is closed. Plug the cord into an electrical outlet. Turn the control dial to INFLATE. Inflation takes about 2 minutes. Once inflated, turn the dial to OFF and unplug.

How long does it take to inflate the mattress?

For the single model (1 person), inflation takes up to 2 minutes. For the two-person model, up to 3 minutes. Do not run the pump for more than 5 minutes at a time.

What to do if the mattress loses air?

Temperature changes can contract or expand the air. Simply add more air via the pump. In case of a puncture, repair with PVC glue and a patch. Also check that the manual valve is properly closed.

Can I use a manual or foot pump?

Yes, the mattress is equipped with a manual valve allowing the use of a standard foot or manual pump if no electrical outlet is available.

How to clean the inflatable mattress?

Clean the surface with soapy water using a soft cloth. Do not use harsh chemicals. Make sure the mattress is dry before storing.

Is the mattress safe for children?

It is not a toy. Never leave a child unattended during use. Do not let an infant sleep on the mattress. Children should not jump or play on it.

Can I use the mattress outdoors?

No, the mattress is designed for indoor use only. Do not expose it to rain or extreme temperatures. Store it in a sheltered place.

What to do if the pump overheats?

The pump has overheat protection and shuts off automatically. Let it cool for at least 20 minutes before using again. Do not exceed 5 minutes of continuous operation.

How to properly store the mattress?

Fully deflate the mattress using the pump. Clean and dry it. Fold it loosely without tight creases and store in a dry, cool place. Avoid sharp objects.

How to repair a puncture?

Locate the leak (soapy water). Clean the area around the puncture. Apply PVC glue and place a patch. Let dry. Do not use flammable aerosols.

USER MANUAL Luxury Single Active Era

INSTRUCTION MANUAL

BEDIENUNGSANLEITUNG

MODE D'EMPLOI

Thank you for choosing to purchase a product from Active Era. Please read the entire manual carefully prior to first use and keep in a safe place for future reference.

Safety Guidelines

• Do not place an infant to sleep on the mattress.
• This is not a toy. Children must not be left unattended when using the airbed. When not in use store away safely and securely.
• Do not use flammable liquids or sprays with the air bed, such as aerosol tire repair products, as it may ignite or explode.
• Keep away from fire.
• Use for intended purpose only: do not walk, stand on or jump on or use the air bed as a trampoline.
• Do not use near or on water.
• Do not set up bed near stairs, doors, sharp edges or breakable objects.
• Provide adequate space between bed and objects to avoid entrapment.
• Make sure the area is flat, smooth, even and free of sharp objects that could puncture the air bed.
• Keep pets away from the airbed. Pets may puncture the surface of the air bed.
• Avoid sleeping on the edge of the air bed. Edges produce less support than the middle of the bed.
• Do not operate air pump for more than 5 minutes at a time. Let pump cool at least 20 minutes between use. The air pump is designed to fully inflate your air bed within 2-3 minutes. The pump will automatically shut off if overheating occurs. This is designed for your safety.
• Do not operate air pump with a damaged cord or plug.
• Unplug electrical power cord when not in use.
• Do not use power cord or pump with wet hands to prevent electric shock.
• Do not obstruct the air passage opening or insert any objects into the air passage opening.
• Do not expose to rain. Store indoors.

Operating Instructions

Parts

1. Control dial
2. Manual valve
3. Power cord compartment cover
4. Air Bed

Inflation

1. Choose a flat, indoor surface large enough to accommodate the inflated air bed.
2. Remove any sharp or pointy objects on or near the surface.
3. Lay the air bed out with the bottom surface touching the floor.
4. Open the cover at the side of the air bed where the power cord is stored.
5. Make sure the manual inflation valve is closed.
6. Plug the power cord into an electrical outlet.
7. Turn the control dial clockwise until the arrow points to INFLATE (Image 1).
8. The single and twin air bed will take up to 2 minutes to inflate. The queen and king size air bed will take up to 3 minutes to inflate.
9. When the airbed is fully inflated, turn the control dial one click anti-clockwise until the arrow points to OFF (Image 2).
10. Lie down on the air bed to test the firmness. If too soft, repeat steps 7 - 9 as necessary.
11. Unplug the cord and store in the power cord compartment.

Inflation Option

If electrical power is not available, then a conventional foot or manual operated air pump can be connected to the air bed.

Deflation

1. Open the cover at the side of the air bed where the power cord is stored.
2. Make sure the manual inflation valve is closed.
3. Plug the power cord into an electrical outlet.
4. Turn the control dial anti-clockwise until the arrow points to DEFLATE (Image 3).
5. The air bed will take up to 3 minutes to deflate.
6. When the air bed is fully deflated, turn the control dial one click clockwise until the arrow points to OFF.
7. Unplug the cord and store in the power cord compartment.

Storage

1. Deflate the air bed following the 'deflation' instructions.
2. Make sure the air bed is clean and dry.
3. Lay bed flat with sleeping surface facing upwards. Fold the air bed loosely and avoid sharp bends, corners and creases which can damage the air bed.
4. Store the air bed in a cool and dry location.

Maintenance

1. Use soapy water to clean the surface of the air bed. Do not use any chemicals.
2. No air pump maintenance is required.
3. To repair punctures to the air bed, use only common PVC repair glue and patches. Do not use flammable aerosols on the surface of the air bed.

Important Advice

The ambient temperatures of air have an effect on the air bed internal pressure. At low ambient temperatures the air will contract within the air bed and the air bed will feel softer: add air as necessary. At high ambient temperatures the air within the air bed will expand significantly and the air bed will become hard and may burst: release air to avoid damage to the air bed or to soften the feel. Do not expose the air bed to extreme temperatures.

Air inside of air bed may expand and contract with varying temperatures leading to reduced pressure inside of air bed. If this occurs, simply add more air issuing the pump to achieve desired firmness.

Stretching is a natural characteristic of new vinyl. During initial use, the air bed may become soft and require additional inflation to maintain desired firmness. This is normal for the first few days of use.

Under no circumstances will Active Era be liable for damages to the air bed caused by negligence, ordinary wear and tear, abuse and carelessness or external forces.

Operating Instructions

Les pièces: