ST-FP9072 - Blender Saturn - Free user manual and instructions

Product Type	Blender
Brand	Saturn
Model	ST-FP9072
Power Consumption	500 W
Voltage	220-230 V
Frequency	50 Hz
Current	2.3 A
Jar Capacity	1.25 L (5 cups)
Jar Material	Heat and cold resistant glass
Motor	3-speed with pulse function
Blade Material	Stainless steel
Safety Features	Overload protection, safety switch
Cleaning Method	Hand wash only (do not immerse motor base)
Accessories Included	Mill attachment for dry grinding

Frequently Asked Questions - ST-FP9072 Saturn

What is the maximum capacity of the blender jar?

The blender jar can hold up to 1.25 liters (5 cups) of liquid.

Can I blend hot liquids in the blender?

Yes, but with caution: remove the feeder cap, do not fill beyond four cups, and start at the lowest speed. Never blend hot liquids in the mini-blender container.

How should I clean the blender?

Disassemble the jar, sealing ring, agitator, and container bottom. Wash all parts in warm soapy water, rinse, and dry. Do not wash in an automatic dishwasher. Wipe the motor base with a damp cloth only.

What speed settings does the blender have?

The blender has three speeds: low (1), high (2), and a pulse (P) mode for short bursts.

Can I crush ice with this blender?

Yes, use the pulse mode to crush ice cubes. Always add at least one cup of liquid to the jar before adding ice.

What should I do if the motor stops or stalls?

Turn off the blender immediately, unplug it, and remove some of the load. Do not restart until the overload is reduced. Avoid overloading the motor.

Is the blender jar dishwasher safe?

No, do not wash any parts in an automatic dishwasher. Hand wash only with warm soapy water to prevent damage.

How do I assemble the blender container correctly?

Turn the jar upside down, place the sealing ring on the opening, insert the agitator blades upside down, then screw on the container bottom firmly. Always ensure the blades are properly covered to avoid injury.

Can I use the blender to grind coffee beans?

Yes, use the mill attachment (if provided) or a mini-blender container. For regular jar, use pulse mode. Do not grind coffee beans in the glass jar unless using the mill.

What are the blades made of?

The agitator blades are made of high-grade stainless steel for durability and sharpness.

USER MANUAL ST-FP9072 Saturn

Exterior view of a modern kitchen blender with a black handle and silver casing (no visible text or symbols)

FOOD PROCESSOR

Dear Buyer!

We congratulate you on having bought the device under trade name "Saturn". We are sure that our devices will become faithful and reliable assistance in your housekeeping.

Avoid extreme temperature changes. Rapid temperature change (e.g. when the unit is moved from freezing temperature to a warm room) may cause condensation inside the unit and a malfunction when it is switched on. In this case leave the unit at room temperature for at least 1.5 hours before switching it on. If the unit has been in transit, leave it indoors for at least 1.5 hours before starting operation.

BLENDER DO'S AND DONT'S

Do

1. Use only the line voltage and frequency as specified on the bottom of the blender.

2. Always operate blender on a clean, dry surface to prevent air from carrying foreign material or water into the motor.

3. Put liquid portions of recipes into blender container first unless the instructions in recipes specify otherwise.

4. Cut all firm fruits and vegetables, cooked meats, fish and seafoods into pieces no larger than 34 " (1.8 cm) to 1" (2.5 cm). Cut all kinds of cheeses into pieces no larger than 34 " (1.8 cm).

5. Use rubber spatula to push ingredients to be chopped into liquid portion of recipe ONLY when motor is OFF.

6. Place cover firmly on blender container before starting and rest hand on the container cover when starting and running motor.

7. Remove heavy dips and spreads, nut butters, mayonnaise and products of similar consistency by removing the processing assembly and pushing the mixture out through the bottom opening into serving dishes or storage container.

8. Pour mixtures if liquid or semi-liquid consistency, such as muffin and cake batters from blender container.

9. Allow cooked vegetables and broth to cool before pouring into blender container for processing.

10. Switch to a higher speed if the motor seems to labor when processing to prevent overloading of the motor.

11. Use a "MINI-BLENDER" or 5-cup blender container to process citrus rind, coffee beans or cereal grains. Use only glass blender container to process whole spices and hard cheese.

DON'T

1. DON'T expect your blender to replace all of your kitchen appliances. It will not: mash potatoes, whip egg whites or substitutes for dairy toppings, grind raw meat, knead or mix stiff dough or extract juices from fruits and vegetables.

2. DON'T process mixtures too long. Remember, the blender performs its tasks in seconds, not minutes. It is better to stop and check the consistency after a few seconds than to overblend and have a mushy or too finely ground product.

3. DON'T overload the motor with extra-heavy or extra-large loads. If the motor stalls, turn off immediately, unplug cord from outlet and remove a portion of the load before beginning again.

4. DON'T put ice cubes into the container without at least one cup of liquid. Ice cubes will not process properly without liquid.

5. DON'T attempt to remove blender container from motor base or replace it until the motor has coasted to a complete stop. Blender parts can be damaged.

6. DON'T remove container cover while processing, as food spillage can occur. Use feeder cap opening to add ingredients.

7. DON'T place or store processing assembly on motor base without first correctly assembling the blender container. Severe injury can result if blender is accidentally turned on.

8. DON'T use any utensil, including spatulas, in the container while the motor is running. They can catch in the moving blades, break the container and cause severe injury.

9. DON'T use ANY container not recommended by manufacturer for processing foods. Other containers may break or loosen during processing and cause severe injury.

10. DON'T use "MINI-BLENDER" containers for processing whole spices (except peppercorns) or hard cheeses, as they can break the "MINI-BLENDER" container and cause injury.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions.

1. To protect against risk of electrical shock, do not put blender in water or other liquid.

2. Close supervision is necessary when any appliance is used by or near children.

3. Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.

4. Avoid contacting moving parts.

5. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or electrical or mechanical adjustment.

6. The use of attachments, including canning or ordinary jars and processing assembly not recommended by may cause a risk of injury to persons.

7. Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons or damage to the blender. If scraping, folding, etc. is necessary, turn off and unplug the blender, and use a rubber spatula only.

8. Blades are sharp. Handle carefully.

9. To reduce the risk of injury to persons, never place cutting blades on base without jar properly attached.

10. Screw on container bottom firmly. Injury can result if moving blades accidentally become exposed.

11. Always operate blender with cover in place.

12. Always hold jar while processing. If the container should turn when the motor is switched ON, switch OFF immediately and tighten jar in threaded container bottom.

13. When blending hot liquids, remove the feeder cap from the two-piece cover. Do not fill blender container beyond the four cup level. Always begin processing at the lowest speed setting. Keep hands and other exploded skin away from the cover opening to prevent possible burns.

14. Do not blend hot liquids in "MINIBLENDER" containers.

15. Do not use outdoors.

16. Do not let cord hang over edge of table or counter, or touch hot surfaces.
17. Do not leave blender unattended while it is operating.

SAVE THESE INSTRUCTIONS

KNOW YOUR BLENDER

This blender is designed for household use only.

COVER

The cover for your blender consists of two parts, the plastic feeder cap (1) and the vinyl cover (2). The cover is self-sealing, and is made of vinyl which is resistant to absorption of odours and stains. The feeder cap is removable for use as a measuring cap and provides and opening for the addition of other ingredients.

CONTAINER

The 5-cup (1.25 liter) container (3) for the blender is graduated for easy measurement and is molded of heat and cold resistant material. The convenient handle and pouring lid permit easy removal of liquid mixtures while thicker mixtures are more easily removed through the bottom opening.

PROCESSING ASSEMBLY

Consists of three parts: (4) as a sealing ring used as a cushion between the container and the agitator; (5) agitator of high-grade stainless steel; (6) a thread-

ed container bottom.

MOTOR AND MOTOR BASE

The powerful three-speed motor is the heart of the appliance and is designed just for this unit. It is completely enclosed within the housing (7). The motor uses a "free-floating" feature to reduce noise and wear. The powerful food processing motor can be overloaded. To avoid this possibility, closely follow the instructions and the quantities recommendations in this book.

CARE AND CLEANING OF YOUR

BLENDER

Blender container parts are corrosion resistant, sanitary and easily cleaned. Before first use and after every use, separate container parts (items 1-6) and clean thoroughly in warm, soapy water, then rinse and dry well. DO NOT WASH ANY PARTS IN AN AUTOMATIC DISHWASHER. Periodically check all parts before reassembly. If the processing blades are stuck or difficult to turn, DO NOT USE BLENDER. Check by carefully turning the blades in a counterclockwise direction (opposite edges are sharp). Blades should turn freely. If the glass container is chipped or cracked, DO NOT USE BLENDER. Further use could result in the container breaking during use.

Use only recommended replacement parts available at an authorized service station.

USE OF DAMAGED OR NON- RECOMMENDED PARTS COULD RESULT IN A SEVERE PERSONAL INJURY

AND/OR DAMAGE TO THE BLENDER. See next page for proper container assembly in user instructions.

NEVER IMMERSE THE MOTOR BASE IN WATER. Unplug unit. The housing can be cleaned with a damp cloth.

The motor is permanently lubricated and does not require any additional lubrication.

ANY SERVICING SHOULD BE PER- FORMED BY AN AUTHORIZED SERVICE FACILITY.

KNOW YOUR BLENDER

CAUTION: Follow these important steps to assemble, tighten, and mount blender container quickly and correctly. INJURY MAY RESULT IF MOVING BLADES ARE ACCIDENTALLY EXPOSED.

ASSEMBLY OF CONTAINER

1. Turn container upside down so the small opening is at the top.

2. Place sealing ring on container opening.

1. Turn the agitator blades upside down and place in mouth of container.
   

2. Thread container bottom to container. Engage threads properly. Screw on firmly.
   
   ASSEMBLY OF MILL Turn mill upside down, and blade base.

Place Ingredients In. Make sure the cor rect packing is placed properly.

Tightly screw the correct blade base onto container.

Place mill on motor housing. Support mill and switch on to grind.

TIGHTENING THE CONTAINER

1. To tighten container bottom, put assembled container securely into motor base ring with handle and lug in front of the right stop.
2. Using container handle, turn container to the left as far as possible. This insures that the container bottom is

tightened properly.

MOUNTING THE CONTAINER

1. To operate blender, place assembled container in motor base ring with container lug against flat side of right motor base stop. If container lug does not rest against flat side of right stop, remove container assembly and place against flat side of left stop. Seat container firmly and operate.

2. To remove container, lift straight up. (if it is not easily removed, rock gently and lift up. Do not twist.) If container bottom cannot be loosened by hand, place assembled container into motor base ring with handle in front of left side stop. Using handle, turn container to right until container bottom loosens.

Do not attempt to place the container on, or remove from the motor base while the motor is running. ALWAYS HOLD CONTAINER WITH ONE HAND WHILE PROCESSING.

CAUTION

- Maximum ingredient volume: 1,500ml - Do not operate blender longer than 2 min at one time. Stop for 1 min., then resume.

- Dice solid food first. Blend with water. - The speed must be set to maximal level as it is loading (It can easy and fast grind food)

- When crushing ice cubes use pulse mode.

FOOD MAX.QTY
Liquid (juice, cocktail, soup etc.)	1,500ml

	FOOD MAX.	QTY	TIME
BLENDER Ice	cubes 20 g 1-		1.5 min.

DRY MILL Pepper 20 g 1-		1.5 min.
Dry chile 20 g 1-		1.5 min.
Coffee beans	60 g 1.5-2 min.

BLENDER BLENDING TIPS

HOW TO USE A RUBBER SPATULA WITH YOUR BLENDER

When blending ingredients of a heavy consistency, such as cheese dips and sandwich spreads, it is necessary to use rubber spatula to help the mixture get down to the blades. To use spatula, turn motor off, remover the cover, move the spatula up and down rapidly along sides of the container, and push the ingredients from the sides of the container to the centre.

MAYONNAISE

If mayonnaise curdles or liquefies, empty contents from container, blend another egg and one-fourth cup (50 mL) of liquefies or curdled mayonnaise until mixed. Remove feeder cap and pour remaining mayonnaise instead of oil into centre of container.

GRAVY OR WHITE SAUCE

To smooth gravy or white sauce which may be lumpy, allow to cool slightly and pour into measuring cup and then put about 12 cup (125 mL) into blender container. Cover and start processing. Remove feeder cap, and with motor running, gradually add remaining gravy or sauce. Continue to process until smooth.

CHOPPING GIBLETS

To chop giblets for gravy, cook the giblets in water or broth, then cool to room temperature. Cut giblets into 1" (2.5 cm) pieces, put in blender container and cover with cooled cooking liquid. Cover container, process two 30-second cycles at HIGH. (If giblets are not chopped finely enough, process for one or two additional cycles).

MAKING BUTTER

Heavy cream, sweet or sour, can be used to make butter - pour into blender container. Cover and process at HIGH until butter forms. Pour into strainer to drain off liquid, then put butter into small bowl and press with spatula to remove as much liquid as possible. Add salt while kneading butter. Try adding 1

tablespoon (15 mL) dried herbs (parsley, tarragon, savory or a garlic clove) per cup (250 mL) of cream for delightful herb butter.

ORANGE AND LEMON PEEL

Freeze thin strips of orange and lemon peel, then process 12 cup (125 mL) at a time in "MINI-BLENDER" container at second speed. Store in freezer in "MINI-BLENDER" container and use as needed for pies, cookies, breads, etc.

BREAD CRUMBS

Prepare bread crumbs from old bread and store in glass jars or "MINI-BLENDER" containers in refrigerator.

GRINDING POPPY SEEDS

To grind poppy seeds for fillings, place 12 cup (125 mL) poppy seeds in "MINIBLENDER" container and process at second speed until seeds are crushed and moist. Stop blender once or twice to shake down seeds from top of container.

GRATING COCONUT

To grate fresh coconut, turn motor to HIGH, remove feeder cap, and drop coconut pieces into revolving blades. After grating 1½ cups (375 mL) coconut, empty container and repeat process until all coconut is grated.

HARD AND DRY CHEESE

CHEDD AND BRY CHEESE Cheddar or processed cheese which has become hard and dry after long storage in the refrigerator may be cut into pieces and grated in the blender. Process at HIGH until finely grated. Then use for casserole toppings, in sauces, etc. DO NOT use "MINI-BLENDER" containers when processing hard cheese.

Specifications

Power:	500 W
Rated voltage:	220-230 V
Rated frequency:	50 Hz
Ratted current:	2,3 A
Glass jar capacity:	1.25 L

Set

BLENDER 1

INSTRUCTION MANUAL WITH WARRANTY BOOK 1 PACKAGE 1

ENVIRONMENT FRIENDLY DISPOSAL

You can help protect the environment!Please remember to respect the local regulations: hand in the non-working electrical equipment to an appropriate waste disposal cen-

ter.

The manufacturer reserves the right to change the specification and design of goods.

RU

КУХОННЫЙ КОМБАЙН

Opis:

A. Pokretna kapa za merenje

B. Poklopac

C. Rupa za dodavante ukusa

D. Posuda (Plastika)

F. Kučište motora

E. Prekidač za promenu operacija

G. Sigurnosni prekidač

G. Sigurnosni prekidac H. Proctor namonion za držanto kahla

Metodi korišćenja

1. Pripremljeno povrće i voće
   treba biti velicine 2×2 cm.
2. Ōtvorite gonji poklopac ako želite da posmatrate process prepreme ili da dodajete voće ili povrce.
3. Pripremajte čvrstu hranu, kao što je soja. Prvenstveno usitnite soju pa nastevite sa korišćenjem blendera.

4. Pripremljeno voće ili povrće sa vodom prvo stavite u posudu, a zatim posudu stavite na kućište blendera.

5. Postavite prekidač na "0"

6. Izaberite brzinu u zavisnosti od popunjenosti posude. Brzina '1' za sporo, brzina '2' za brzo, "P" za dodatno(kratko) uključenje.

7. Čiščenje: Kada ste završili, iskljucite i izvucite kabl iz utičnice. Poklopac i posuda se može prati u vodi. Kučište blendera se briše vlažnom krpom.

8. Sečivo se može prati u vodi.

The Warranty is provided for the period of 2 years or more if the Law on User Right of the country where the appliance was bought provides for a greater minimum warranty period.

All terms of warranty comply with to the Law on Protection of the Consumer Rights and are governed by the legislation of the country where the product was bought.

The warranty and free of charge repair are provided in any country where the product is delivered to by Saturn Home Appliances or authorized representative thereof, and where no restriction of import or other legal provisions interfere with rendering of warranty services and free of charge repair.

Cases uncovered by the warranty and free of charge repair:

1. Guarantee coupon is filled in improperly.
2. The product has become inoperable because of the Buyer's non-observance of the service regulations indicated in the instruction.
3. The product was used for professional, commercial or industrial purposes (except for the models, specially intended for this purpose that is indicated in the instruction).
4. The product has external mechanical damage or damage caused by penetration of the liquid inside, dust, insects and other foreign objects.
5. The product has damages caused by non-observance of the rules of power supply from batteries, mains or accumulators.
6. The product was exposed to opening, repair or modification of design by the persons, unauthorized to repair; independent cleaning of internal mechanisms etc. was made.
7. The product has natural wear of parts with limited service life, expendables etc.
8. The product has deposits of scale Inside or outside of fire-bar elements, irrespective of used water quality.
9. The product has damages caused by effect of high (low) temperatures or fire on non-heat resistant parts of the product.
10. The product has damages of accessories and nozzles which are included into the complete set of product shipment (filters, grids, bags, flasks, cups, covers, knives, sealing rings, graters, disks, plates, tubes, hoses, brushes, and also power cords, headphone cords etc.).

On the warranty service and repair, please contact the authorized service centers of Saturn Home Appliances.

CZ

MEZINÁRODNÍ ZÁRUKA

When purchasing the product,

please require its checking before you;

BE SURE

that the goods sold to you, are functional and complete

and that the warranty coupon is filled in correctly.

This warranty coupon confirms the absence of any defects in the product you purchased and provides for free of charge repair of the product failed through the fault of the manufacturer throughout the period of warranty service and free of charge repair.

Failing the presentation of this coupon, in case of its improper filling in, infringement of factory seals (if any), and also in cases indicated in the warranty obligations, the claims are not accepted, and no warranty service and free of charge repair is made! The warranty coupon is valid only in the original copy with the stamp of trading organization, signature of the seller, date of sale and signature of the buyer.

CZ

ZÁRUČNÍ LIST

Při koupi výrobku

Buyer's Signature confirming the acquaintance and consent with conditions of free of charge maintenance service of the product, and absence of the complaints on appearance and color of the product.