Canterbury - Wardrobe Silver Cross - Free user manual and instructions
Find the device manual for free Canterbury Silver Cross in PDF.
| Product Type | Wardrobe |
| Brand | Silver Cross |
| Model | Canterbury |
| Assembly Required | Yes (two people required) |
| Material | Wood (engineered wood) |
| Doors | 2 |
| Drawers | 2 |
| Convertible to Full-Length Hanging | Yes (by removing top shelf) |
| Door Adjustment | Gap, height, and angle adjustable via hinge screws |
| Cleaning Instructions | Damp cloth only; no bleach, abrasives, or strong detergents |
| Safety Features | Wall strap included; anti-tip required |
| Maintenance | Regularly check fittings and components |
| Spare Parts | Only use Silver Cross supplied parts |
| Included Items | Assembly instructions, wall strap (no wall fittings) |
| Warning | Never leave child unattended; do not allow climbing |
Frequently Asked Questions - Canterbury Silver Cross
User questions about Canterbury Silver Cross
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Wardrobe in PDF format for free! Find your manual Canterbury - Silver Cross and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Canterbury by Silver Cross.
USER MANUAL Canterbury Silver Cross
Assembly Instructions



IMPORTANT:
THE ASSEMBLY OF THIS PRODUCT
REQUIRES TWO PEOPLE
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
Parts List:




G = 2 pcs (L \ amp; R) H = 2 pcs (L \ amp; R) I = 2 pcs (L \ amp; R)
K = 1 pc




L = 2 pcs L 1 = 4 pcs (L \ amp; R) L 2 = 2 pcs L 3 = 2 pcs
Fittings List:





1 × PVC Bag

Step 2:


Step 4:


Step 5:

Step 6:

Step 7:

Step 8:

Step 9: For both doors

Step 10:

Step 11:

Step 12:
For both drawers

Step 13: For both drawers

Step 14: For both drawers

Step 15:

Step 16:

Step 17:

Step 18:

Step 19:
To convert wardrobe into full length hanging space by removing the top shelf

Step 20:
Remove 4 x retaining bolts and remove 7 x back panel screws (6 x Ⓟ1 and 1 x Ⓟ)

Step 21:

Step 22:



Adjusting the gap between the doors
Loosen screw "A", turn screw "B" clockwise or anti-clockwise until the gap between doors is equal then tighten screw "A".


Adjusting the height of the doors
Loosen screws "C" then slide the hinge plate up or down until the doors are even, then tighten the screws. NOTE: The remaining two screws must be removed prior to adjustment


Adjusting the angle of the door
Loosen screw "A" and slide the hinge arm either forwards or backwards until the door is even vertical then tighten screw "A".

Notes:
Warnings & Instructions For Safe Use & Maintenance
WARNING
NEVER LEAVE YOUR CHILD UNATTENDED. The safety of your child is your responsibility.
Regularly check all fittings and components are fully tightened and in good working order. If any parts have become worn or damaged then do not use the product and seek advice from your retaile or Silver Cross. Only use spare parts supplied by Silver Cross.
Be aware of the risk of open fire and other sources and it is important that the correct wall fittings are of strong heat, such as electric bar fires, gas fires used. Consult a professional before attempting etc. in the near vicinity of the wardrobe. to attach the strap to the wall. No wall fittings are
Never use the wardrobe if any parts are broken or missing.
Never drag or pivot the wardrobe. It must be lifted and moved by at least two people.
Before use, ensure the wardrobe is on a level, stable surface.
Do not allow children to climb on the wardrobe.
The wardrobe can be cleaned with a damp cloth. Never use bleach, abrasive or strong detergents. Thoroughly dry immediately after cleaning.
WALL STRAP INFORMATION
Never modify or change the wall strap in any way. Never use any other fittings other than those supplied to attach the wall strap to the wardrobe.
The wall strap provided is to be used with this product only.
Never use the screw provided to attach the strap to the wall. All walls are of different composition and it is important that the correct wall fittings are used. Consult a professional before attempting to attach the strap to the wall. No wall fittings are supplied with this product.
The wall strap must not be used to replace any other fittings supplied with this piece of furniture.
We recommend the wall strap is used in all cases. To improve the stability of the furniture an even wood or tiled floor is best. A carpeted or warped floor can enable the furniture to rock, increasing the potential of the furniture to fall over.