ELICA

Sienna - Range hood ELICA - Free user manual and instructions

Find the device manual for free Sienna ELICA in PDF.

📄 10 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice ELICA Sienna - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Range Hood
Brand Elica
Model Sienna
Width 60 cm (23.6 inches)
Depth 50 cm (19.7 inches)
Height (Min-Max) 60-110 cm (23.6-43.3 inches)
Weight 12 kg (26.5 lbs)
Power Supply 220-240 V ~ 50 Hz
Motor Power 200 W
Extraction Rate (Max) 650 m³/h
Noise Level (Max) 65 dB(A)
Energy Class A+
Lighting 2 x 3 W LED
Controls Electronic Push Button
Number of Speeds 3 + Boost
Grease Filter Aluminum, Dishwasher-safe
Carbon Filter Optional, Replaceable
Installation Type Wall-mounted or Recirculation
Duct Diameter 150 mm (6 inches)
Remote Control Included

Frequently Asked Questions - Sienna ELICA

How do I install the Elica Sienna range hood?
Installation should be performed by a qualified professional. Ensure the chimney is at least 65 cm above the cooking surface. Use the included mounting template and secure with appropriate anchors. For recirculation mode, install the carbon filter.
How do I clean the grease filters?
Remove the aluminum grease filters and wash them in the dishwasher or by hand with warm soapy water. Let them dry completely before reinstalling. Clean them at least once a month.
How often should I replace the carbon filter?
If using recirculation mode, replace the carbon filter every 3-6 months, depending on usage. A saturated filter reduces performance.
Why is my range hood noisy?
Noise can be due to loose parts, a dirty filter, or duct obstructions. Check that all screws are tight, clean or replace filters, and ensure the duct is clear.
Can I use the range hood without ducting?
Yes, you can use it in recirculation mode by installing a carbon filter. The air will be filtered and returned to the kitchen.
How do I change the LED lights?
The LED lights are integrated and should be replaced by a qualified technician. Do not attempt to replace them yourself to avoid electrical hazard.
What does the boost function do?
The boost function runs the motor at maximum speed for a limited time (usually 5-10 minutes) to quickly remove strong odors or steam.
My remote control is not working. What should I do?
Check the batteries in the remote. Ensure there is no obstruction between the remote and the hood. If the problem persists, the receiver may need resyncing or replacement.
How do I reset the filter alarm?
After cleaning or replacing filters, press and hold the speed button for about 3 seconds until the indicator light turns off.
What is the warranty on the Elica Sienna?
Elica offers a 2-year warranty for manufacturing defects. Keep your receipt and register the product online for full coverage.

User questions about Sienna ELICA

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Range hood in PDF format for free! Find your manual Sienna - ELICA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Sienna by ELICA.

USER MANUAL Sienna ELICA

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : ELICA

Model : Sienna

Category : Range hood