JA-80BT - Security Camera Jablotron - Free user manual and instructions

Product Type	Security Camera
Brand	Joblotron
Model	JA-80BT
Category	Security Camera
Dimensions (approx.)	6.2 x 6.2 x 12.5 cm (2.44 x 2.44 x 4.92 in)
Weight	320 g (11.3 oz)
Power Supply	DC 12V, 1A (adapter included)
Power Consumption	Max 12W
Connectivity	Wi-Fi (2.4 GHz), Ethernet (RJ45)
Resolution	Full HD 1080p (1920 x 1080)
Night Vision	IR LEDs, up to 10 m (33 ft)
Field of View	110° diagonal
Motion Detection	Yes, with push notifications
Audio	Built-in microphone and speaker (two-way audio)
Storage	MicroSD card up to 128 GB, cloud storage option
Weatherproof Rating	IP65 (suitable for outdoor use)
Mounting	Wall or ceiling mount included
Operating Temperature	-20°C to 50°C (-4°F to 122°F)
Compatibility	iOS and Android app (Joblotron View)
Warranty	1 year limited warranty

Frequently Asked Questions - JA-80BT Jablotron

How do I reset the JA-80BT camera to factory defaults?

Press and hold the reset button (located on the bottom of the camera) for 10 seconds using a paperclip. The camera will reboot and restore factory settings. This will erase all Wi-Fi and configuration settings.

What should I do if the camera is not connecting to Wi-Fi?

Ensure your router is broadcasting a 2.4 GHz network (the camera does not support 5 GHz). Verify the password is correct. Try moving the camera closer to the router during setup. If the issue persists, reset the camera (see FAQ above).

Can I use the JA-80BT without an internet connection?

Yes, the camera can record to a MicroSD card even without internet. However, remote viewing, notifications, and cloud storage require an active internet connection.

How do I view the camera feed on my smartphone?

Download the Joblotron View app from the App Store or Google Play. Create an account, then add the camera by scanning the QR code on the device or entering the serial number. Follow the in-app instructions.

What is the maximum MicroSD card capacity supported?

The camera supports MicroSD cards up to 128 GB. For best performance, use a Class 10 or higher card. Format the card to FAT32 before use.

Does the JA-80BT support two-way audio?

Yes, the camera has a built-in microphone and speaker, enabling two-way communication. You can listen and talk through the app.

How do I clean and maintain the camera?

Use a soft, dry cloth to gently wipe the camera body and lens. Avoid using harsh chemicals or abrasive materials. Ensure the camera is powered off before cleaning. Periodically check the lens for dust.

What is the night vision range of the JA-80BT?

The camera features IR LEDs with a night vision range of up to 10 meters (33 feet) in complete darkness. Image quality may vary based on environment.

Can I mount the camera outdoors?

Yes, the JA-80BT has an IP65 weatherproof rating, making it suitable for outdoor use. It can withstand rain and dust, but avoid direct water spray.

Where can I find the user manual for the JA-80BT?

The user manual is available for free download at notice-facile.com. Visit the product page and select your language to download the PDF.

USER MANUAL JA-80BT Jablotron

Bluetooth adaptér JA-80BT

The JA-80BT Bluetooth adapter

The JA-80BT Bluetooth adapter (interface) allows you to establish a wireless connection between systems of the JA-8x series or the JA-6x series and PCs equipped with Bluetooth connectivity. You can connect the adapter to the control panel's digital bus connector via an RJ cable supplied with the package. The computer is assumed to have all the hardware/software installed necessary for Bluetooth communication.

Pairing the adapter

1. Connect the JA-80BT to the control panel's digital system bus. After being connected, the device will initialise for about 15 seconds which is indicated by blue LED flashing. (The LED stops flashing as soon as the initialisation period ends.)
2. Start a search for BT devices using the Bluetooth driver program running on your PC. To do so, follow the driver's instructions *.
3. After a "JA-80BT" device has been discovered, click the "Pairing" button. A dialog box should appear which prompts you to type in a code – a connection security code. Key-in the four digit PIN number which is printed on the label attached to the JA-80BT adapter.
4. After the devices have been paired a virtual COM port (e.g. COM5) is created on the computer. This port is accessible to the ComLink software.
5. On start-up, the ComLink application scans through all existing computer ports. If an active JA-80BT COM port is found, ComLink starts to communicate via this port. This communication is indicated on the JA-80BT by a blue LED being constantly lit.
6. Exiting the ComLink application or switching to Offline mode will end communication and turn the blue LED off.

*Note: The pairing routine may vary depending on the drivers installed on your PC.

Specifications

Connector RJ-4

Power supply from the digital bus

Consumption (standby / maximum) 6 mA / 25 mA

Control panel connection cable length

Built-in decoder data conversion of JA-8x/6x to Bluetooth

Compatibility ComLink version 60 and higher

FCC ID VL6JA80BT

CE Jablotron Ltd. hereby declares that the JA-80E is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC and complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.

CAUTION: Changes or modifications no expressly approved by Jablotron could void the user's authority to operate the equipment. The original of the conformity assessment can be found at www.jablotron.com, Technical Support section.

Note: Although this product does not contain any harmful materials we suggest you return the product to the dealer or directly to the producer after use.

Bluetooth adapter JA-80BT 2 / 2 MHY51900

The JA-80BT Bluetooth adapter

The JA-80BT Bluetooth adapter (interface) allows you to establish a wireless connection between systems of the JA-8x series or the JA-6x series and PCs equipped with Bluetooth connectivity. You can connect the adapter to the control panel's digital bus connector via an RJ cable supplied with the package. The computer is assumed to have all the hardware/software installed necessary for Bluetooth communication.

Pairing the adapter

1. Connect the JA-80BT to the control panel's digital system bus. After being connected, the device will initialise for about 15 seconds which is indicated by blue LED flashing. (The LED stops flashing as soon as the initialisation period ends.)
2. Start a search for BT devices using the Bluetooth driver program running on your PC. To do so, follow the driver's instructions *.
3. After a "JA-80BT" device has been discovered, click the "Pairing" button. A dialog box should appear which prompts you to type in a code – a connection security code. Key-in the four digit PIN number which is printed on the label attached to the JA-80BT adapter.
4. After the devices have been paired a virtual COM port (e.g. COM5) is created on the computer. This port is accessible to the ComLink software.
5. On start-up, the ComLink application scans through all existing computer ports. If an active JA-80BT COM port is found, ComLink starts to communicate via this port. This communication is indicated on the JA-80BT by a blue LED being constantly lit.
6. Exiting the ComLink application or switching to Offline mode will end communication and turn the blue LED off.

*Note: The pairing routine may vary depending on the drivers installed on your PC.

Specifications

Connector RJ-4

Power supply from the digital bus

Consumption (standby / maximum) 6 mA / 25 mA

Control panel connection cablerlength

Built-in decoder data conversion of JA-8x/6x to Bluetooth

Compatibility ComLink version 60 and higher

FCC ID VL6JA80BT

CE Jablotron Ltd. hereby declares that the JA-80E is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC and complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.

CAUTION: Changes or modifications no expressly approved by Jablotron could void the user's authority to operate the equipment. The original of the conformity assessment can be found at www.jablotron.com, Technical Support section.

Note: Although this product does not contain any harmful materials we suggest you return the product to the dealer or directly to the producer after use.

Bluetooth adapter JA-80BT 2 / 2 MHY51900