AQM8F 49 I V - Tumble drier HOTPOINT - Free user manual and instructions
Find the device manual for free AQM8F 49 I V HOTPOINT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tumble Dryer |
| Brand | Hotpoint |
| Model | AQM8F 49 I V |
| Capacity | 8 kg |
| Drying Type | Condenser |
| Energy Efficiency Class | A++ |
| Dimensions (H x W x D) | 85 cm x 60 cm x 60 cm |
| Weight | 45 kg |
| Power Supply | 220-240 V, 50 Hz |
| Power Consumption | 2500 W |
| Noise Level | 65 dB(A) |
| Number of Programs | 15 |
| Key Programs | Cotton, Synthetics, Delicates, Wool, Mix, Eco, Timed Drying |
| Additional Features | Delay Start, Anti-Crease, Child Lock, End of Cycle Signal |
| Lint Filter | Clean after each cycle |
| Water Tank | Empty after each cycle (condenser model) |
| Condenser Unit | Clean periodically to maintain efficiency |
| Self-Cleaning Condenser | No |
| Spare Parts Availability | Available from Hotpoint service centers |
| Repairability Index | 7.5 / 10 |
| Warranty | 2 years |
Frequently Asked Questions - AQM8F 49 I V HOTPOINT
How do I clean the lint filter?
Open the door and pull out the lint filter located in the door frame. Remove lint by hand or with a soft brush, rinse under water if necessary, and dry before reinserting.
Why is the drying cycle taking too long?
Possible causes include a clogged lint filter, full water tank (for condenser models), overloaded drum, or selected program with low heat. Check and clean the filter, empty the water tank, and reduce load size.
How do I empty the water tank?
Pull out the water tank drawer (usually bottom left or right), empty the water, rinse the tank, and push it back until it clicks into place.
What does the 'Anti-Crease' function do?
The anti-crease function periodically rotates the drum after the drying cycle ends to prevent wrinkles if you cannot remove clothes immediately. It can last up to 2 hours.
Can I dry wool or delicate items?
Yes, use the dedicated 'Wool' or 'Delicates' program. Ensure items are labeled as tumble dryer safe and do not overload. Use a lower temperature setting.
How do I activate the child lock?
Press and hold the 'Child Lock' button (usually indicated by a key icon) for 3-5 seconds until the symbol appears on the display. Repeat to deactivate.
Why is the dryer not starting?
Check if the door is properly closed, the program is selected, and the Start/Pause button is pressed. Also ensure the water tank is not full and the lint filter is clean. If still not starting, check the power supply and fuse.
How often should I clean the condenser?
Clean the condenser unit every 1-3 months depending on usage. Refer to manual for location and cleaning instructions. Some models have a self-cleaning condenser.
What does the 'Delay Start' function do?
Delay start allows you to set the dryer to finish at a later time. Press the Delay button and select the number of hours (usually up to 24) before the cycle should end.
Where can I find spare parts?
Spare parts are available through Hotpoint official service centers or authorized dealers. Check the manual for part numbers and contact information.
User questions about AQM8F 49 I V HOTPOINT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble drier in PDF format for free! Find your manual AQM8F 49 I V - HOTPOINT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AQM8F 49 I V by HOTPOINT.